Parcourez les contrats gouvernementaux canadiens actifs.

Department of National Defence (DND) - *Montréal *Edmonton, *World, Ottawa, Ontario

**Tender summary —MP Police Outfitting: Repair and Overhaul (R&O)** - **Buyer:** Department of National Defence (DND) - **Tender status:** Open - **File number:** W8486-270799/A - **Closing date:** October 2, 2026, at 2:00 p.m. The closing date was extended from September 18, 2026 through Amendment 005. - **Locations identified:** Montréal, Edmonton, Ottawa/Ontario, and potentially other locations described as “World.” - **Work type:** Services involving the installation and removal of Military Police equipment from vehicles, along with related repair, overhaul, testing, labour, parts, and shop-support activities. **Expected volume** The tender estimates installation services for up to **35 Military Police vehicles per year** and removal services for up to **35 vehicles per year**. These figures are estimates, not guaranteed quantities. **Important technical and pricing points** - Equipment installed under the contract must be **new**; removed equipment cannot be reused. - DND may provide some equipment for installation, including laptops or tablets, radar guns, audio/visual equipment, communications equipment, and laptop modems. - Certain equipment—such as wig-wag lights, prisoner-containment equipment, cargo barriers, push bumpers, equipment trays, and subframes with electronics panels—was clarified as already being installed by Ford through its own upfitter. - **Table 1** is to cover labour, shop supplies, decals, and mandatory replacement parts as applicable to the required work. The vendor response specifically clarified that Table 1 should be priced based on labour, shop supplies, and decals. - **Table 2** applies to units considered non-repairable and destined for scrap, rather than ordinary equipment removal and testing. - The **Evaluated Aggregate Price** is intended to summarize the three regions. A table label was corrected to “Additional Work Request” through the amendments. - If a commercial carrier cannot properly accommodate or handle a vehicle, the contractor is instructed to refuse delivery and contact the applicable DND authority to arrange another carrier. **Potential considerations for a business** This opportunity appears most relevant to businesses with vehicle upfitting, police or fleet-equipment installation, automotive repair/overhaul, electrical and communications installation, and multi-location service capabilities. The full solicitation should be reviewed carefully for mandatory technical criteria, regional facility requirements, personnel or equipment standards, insurance, security requirements, pricing tables, tasking procedures, and contract terms. The available material indicates that multiple regional locations may be important, but the exact requirement should be confirmed in the complete RFP and amendments. **Next steps** Review the official RFP, Statement of Work, all amendments, vendor-question responses, and pricing annexes before deciding whether to bid. Confirm the final closing instructions and submission method on the official Canada Buys notice, since no direct official notice URL was provided here. This summary is not a determination that your business qualifies or that the tender is suitable; all requirements should be verified against the official documents before submitting a bid.

Société québécoise des infrastructures - Québec, QC

C01 - Bâtiments

Department of Health (HC) - *Canada, Ottawa, ON

**Tender:** Multi-Tier IM/IT Research and Advisory Services **Buyer:** Department of Health (Health Canada) **Status:** Open **Closing date:** October 3, 2026, at 2:00 p.m. (time zone should be confirmed in the official notice) **Location:** Canada, Ottawa, Ontario **Category:** Services **What is being requested:** Health Canada’s Digital Transformation Branch is seeking IM/IT research and advisory services to support program delivery and public-service improvements. The requirement appears to involve access to an electronic, self-service research platform containing materials such as articles, reports, templates, blueprints, white papers, and strategic-planning guides. The supplier may also be expected to provide contractor guidance and tailored insights based on IT research and industry best practices. This opportunity could be relevant to businesses that provide IT research subscriptions, technology advisory services, digital transformation guidance, strategic planning resources, or related consulting support. The description alone does not confirm the full eligibility requirements, service tiers, contract terms, security requirements, evaluation criteria, or submission process. **Recommended next steps:** - Review the complete tender notice and all attachments. - Confirm the exact closing time, submission instructions, contract structure, required security clearances, and evaluation criteria. - Determine whether the proposed platform, research content, advisory services, and support model align with the requirement. - Verify any applicable Canadian procurement registration, certification, or supplier requirements before submitting a bid.Tender notice document: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106595/1000272299---npp_english.pdf This summary is based on the information provided and does not determine whether any business qualifies. Details must be verified in the official tender notice before preparing or submitting a bid.

Ville de Québec - Quebec

C02 - Ouvrages de génie civil

Department of Industry (ISED) - Ottawa, Ontario

This appears to be an open Government of Canada opportunity with the Department of Industry (ISED) for a Level 3 Project Manager. The contractor would provide project-management support and expertise for IM/IT transformation projects and initiatives within the Transformation Portfolio and Design Branch and related branches. The work may support Corporations Canada and the Office of the Superintendent of Bankruptcy. Key details: -Location: Ottawa, Ontario -Closing date: October 5, 2026 at 2:00 p.m. (as listed) -Category: SRV -Buyer: Department of Industry (ISED) -Status: Open This may be relevant to businesses that can provide experienced project-management resources for federal IM/IT and transformation work. The notice does not provide enough information here to assess mandatory qualifications, security requirements, contract terms, submission instructions, or whether remote work is permitted. Review the official tender notice and all attached documents carefully before deciding whether to bid.Official document: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106589/tbips-ised216393---npp.pdf

National Research Council of Canada (NRC) - *British Columbia, *Canada, Ottawa, Ontario

The National Research Council of Canada (NRC) is seeking offers to purchase one general-purpose laboratory vacuum vessel. The vessel appears intended for a cryogenic testing system used by NRC’s Herzberg Astronomy and Astrophysics Research Center to test mechanisms at very low temperatures before they are installed in astronomical instruments. The supplied vessel would be integrated with a cryocooler, vacuum pump, and other custom components. This opportunity may be relevant to businesses that can manufacture or supply specialized vacuum vessels and meet the technical, drawing, delivery, and other requirements in the tender documents. The tender is listed as open and closes October 5, 2026, at 2:00 p.m. The listing identifies British Columbia and Ottawa, Ontario, so the applicable delivery or performance location should be confirmed in the official documents. The available documents include the technical offer, financial offer, engineering drawing, offer submission and declaration forms, and the full request for proposals (RFP 26-58133). Before deciding whether to submit, review the complete RFP and all annexes carefully, including mandatory specifications, compliance requirements, pricing instructions, delivery terms, and submission procedures. This summary does not establish that a business qualifies or can meet the requirements. Verify all details, amendments, and the closing time through the official Canada Buys tender notice before submitting a bid.

Royal Canadian Mounted Police (RCMP) - *Thunder Bay *Sault Ste. Marie *Ontario (except NCR), *Ontario (except NCR), London, Ontario

The RCMP is seeking eight (8) crossover snowmobiles for border-integrity operations in Ontario. The opportunity is currently listed as open and appears to involve deliveries or use associated with Thunder Bay, Sault Ste. Marie, London, and other Ontario locations outside the National Capital Region. Key details: -Buyer: Royal Canadian Mounted Police (RCMP) -Closing date and time: October 5, 2026, at 2:00 p.m. [time zone should be confirmed in the official solicitation] -Required delivery deadline: January 15, 2027 -Submission method: Email to Emily Noonan at [email protected] -Procurement approach: The bid must meet all mandatory requirements and technical criteria. Among responsive bids, the lowest evaluated price is expected to be recommended for award. -Supplier eligibility: The notice states that bidding is open to Canadian suppliers and suppliers from applicable trading partners. This does not determine whether a particular business is eligible. -Language: Submissions may be made in English or French. -Packaging: Environmentally preferable packaging requirements are described as mandatory. A business that sells or supplies crossover snowmobiles, and can meet the required specifications, delivery schedule, packaging rules, and submission requirements, may find this opportunity potentially relevant. The detailed technical specifications, mandatory criteria, pricing instructions, contract terms, and any required forms should be reviewed in the attached documents: -NPP: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105932/202701836---npp---en_0.pdf -RFP: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105932/202701836---rfp---en_0.pdf Before preparing a bid, verify the complete official tender notice and all attachments on Canada Buys/GETS. The RCMP states that amendments and responses to bidder questions will be posted there without necessarily being sent directly to suppliers, so the listing should be checked regularly before the closing time.

Department of National Defence (DND) - *Montréal *Edmonton, *World, Ottawa, Ontario

## Tender summary The Department of National Defence (DND) appears to be seeking **23 line items of construction-engineering and military vehicle spare parts** under file **W8486-270989/A**. The tender is listed as **open** and closes on **October 5, 2026, at 2:00 p.m.** This opportunity may be relevant to Canadian businesses that supply or source items such as engine cooling and hydraulic components, exhaust pipes, steering and driveline parts, brake components, valves, pumps, bearings, and related vehicle parts. ## Main requirements - **Delivery deadline:** On or before **January 31, 2027**. - **Delivery locations:** - **25 CFSD, Montréal, Quebec** - **7 CFSD, Edmonton, Alberta** - **Pricing:** Offers must be submitted in **Canadian dollars**. - **Taxes:** Applicable taxes are excluded. - **Included costs:** Delivery, Canadian customs duties, and excise taxes must be included in the offered pricing. - **Product options:** Bidders proposing an equivalent or substitute product must identify the **brand, model and/or part number, and NSCM/CAGE code**. - The Crown indicates that it retains the right to negotiate with suppliers. ## Quantities and delivery breakdown The requirement includes parts such as: - EGR coolers — **3 total** - Electronic component assemblies — **3** - Axial fan impellers — **27 total** - Exhaust pipes — **3** - Engine cooling-system pumps — **8** - Hydraulic pumps — **3** - Steering tie rods — **8** - Vehicular universal joints — **11** - Transmission shift-control and manifold valve assemblies — **6 total** - Brake drums — **13** - Brake drum bolt assemblies — **20 BX** - Brake shoes — **68 total** - Brake-shoe actuating camshafts — **19 total** - Camshaft hardware kits — **8** - Tapered roller bearing cups — **29** - Brake-shoe parts kits — **136 total** Most items are divided between Montréal and Edmonton. The tender notice should be reviewed for the exact part numbers, NSNs, manufacturer or CAGE references, quantities, and destination for each line item. ## Potential fit considerations This could potentially match a business that can supply the specified parts or acceptable equivalents, meet the delivery schedule, provide pricing in Canadian dollars with the required costs included, and document equivalent products using the requested identification details. The information provided does not establish whether any particular company meets the tender’s requirements. Before preparing an offer, review the complete official tender notice and PDF, including all submission instructions, specifications, eligibility conditions, certifications, amendment notices, and any terms not included in this summary. Verify the current closing date and requirements on the official Canada Buys notice before submitting a bid: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104869/w8486-270989---cee-spares---rfp-en.pdf

Correctional Service of Canada (CSC) - *Quebec (except NCR), Laval, Québec

This appears to be an open Government of Canada opportunity from Correctional Service Canada for refrigeration technician and apprentice services at Port-Cartier Institution in Quebec. Work may be requested as needed and could include maintenance, inspections, repairs, replacement or modification of refrigeration systems, chilled-water air-conditioning components, ventilation and air-treatment equipment, installation of new components, and troubleshooting failures. The standing offer is expected to run from award until June 30, 2027, with an option for one additional one-year renewal period. The procurement strategy is the lowest-priced compliant bid. The notice states that there are no Indigenous-business set-asides, no comprehensive land claim requirements, and no security requirements identified in the notice. Suppliers must appear to be Canadian suppliers or suppliers from an applicable trading partner, subject to the applicable procurement rules. The closing date is October 5, 2026, at 2:00 p.m. The notice indicates that bids may be submitted in English or French. The complete statement of work, payment details, evaluation criteria, and submission instructions are in the solicitation documents. Potentially relevant businesses should review the full documents carefully, including the technical specifications, request for standing offer, required technician and apprentice qualifications, licensing or certification requirements, response times, pricing format, and any insurance or operational conditions. Verify the official Canada Buys tender notice and all associated documents before deciding whether to bid or submitting a proposal. The listed contracting authority is Kim Lavallée, 450-506-3197, [email protected].

Royal Canadian Mounted Police (RCMP) - *Canada, *World, Ottawa, ON

The RCMP is seeking suppliers for Oleoresin Capsicum (OC) defensive spray through a National Individual Standing Offer. This appears relevant to Canadian or international businesses that can supply and deliver the specified law-enforcement equipment across Canada, excluding Nunavut. Key details: -Solicitation: 202603090A -Procurement method: Open Request for Standing Offer (RFSO) -Buyer: Royal Canadian Mounted Police (RCMP) -Closing deadline: October 5, 2026, at 2:00 p.m. EDT -Delivery: Canada, excluding locations within Nunavut - Standing-offer period: 3 years, with up to three additional one-year extensions -Evaluation: Lowest compliant bid -Trade agreement: Canadian Free Trade Agreement (CFTA) -Submission: By email to [email protected] -Bid language: English or French The product must meet the requirements in Annex A and the full RFSO documents. Environmentally preferable packaging specifications are identified as mandatory, so packaging and plastic-related requirements should be reviewed carefully. The procurement also includes supplier integrity and compliance provisions. Before deciding whether to bid, review the complete RFSO, statement of work, specifications, submission instructions, and any amendments on the official Canada Buys GETS website. The notice states that bidders are responsible for checking GETS regularly because amendments may not be sent directly to suppliers. Confirm the closing time, email submission process, technical requirements, pricing format, delivery obligations, and any applicable regulatory requirements before submitting. This summary does not establish that a business qualifies or that its bid would be compliant.

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

Defence Construction Canada is seeking proposals from design-build teams for the design and construction of up to seven new CAT II accommodation buildings at 5th Canadian Division Support Base Gagetown in Oromocto, New Brunswick. The opportunity uses a modified design-build approach and has an estimated value of approximately $133 million. The work appears relevant to major construction firms and multidisciplinary design-build teams with capabilities in architecture, structural, mechanical, electrical and civil engineering, commissioning, project management, construction supervision, and Indigenous relations coordination. The tender also lists hourly-rate classifications for various design and project personnel. The selected contractor will be required to hold a valid Designated Organization Screening (DOS) issued through PSPC’s Contract Security Program. Security requirements are identified in Amendment No. 1, so proponents should review that amendment and all RFP documents carefully. Proposals must be submitted through the MERX Electronic Bidding System by October 5, 2026 at 2:00 p.m. The listing identifies Ottawa, Ontario, but the project description places the work at 5 CDSB Gagetown in Oromocto, New Brunswick; this should be confirmed in the official tender documents. Questions must be sent only to the designated point of contact in the notice, as contacting others could create a risk of disqualification. Before deciding whether to bid, review the complete official MERX notice, RFP, amendments, security requirements, submission instructions, mandatory experience and team requirements, pricing schedules, and any bonding or insurance provisions. This summary does not determine whether your business qualifies, and all details should be verified against the official tender notice before submitting a proposal: https://www.merx.com/public/solicitations/4056245952/abstract?language=EN

Société québécoise des infrastructures - Québec, QC

Services professionnels en ingénierie des sols et des matériaux pour le module clinique transitoire pour le projet d’agrandissement et de réaménagement du bloc opératoire et chirurgie d’un jour de l’hôpital Charles-Le Mo...