Parcourez les contrats gouvernementaux canadiens actifs.

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

Defence Construction Canada is seeking proposals from design-build teams to design and construct new Basic Military Qualifications facilities at CFB Borden, Ontario, using a modified design-build approach. The opportunity is estimated at approximately $150 million, making it a major project that appears most relevant to large general contractors, integrated design-build firms, and specialized architectural, engineering, construction, and trade partners. The notice lists extensive design resources, including architects, sustainable-design specialists, structural, mechanical, electrical, civil/municipal engineers, technologists, technicians, draftspersons, and project management personnel. Businesses that do not lead a full design-build team may potentially be relevant as subcontractors or specialist consultants, depending on the RFP requirements. The closing date was amended from September 21, 2026 to October 6, 2026. The closing time remains 2:00 p.m., but bidders should confirm the applicable time zone and exact deadline in MERX. Proposals must be submitted electronically through MERX. The successful contractor will be required to hold a valid Designated Organization Screening (DOS) issued through PSPC’s Contract Security Program. The project is subject to the Canadian Free Trade Agreement, CETA, and WTO Government Procurement Agreement. Questions must be sent only to the point of contact identified in the notice; contacting others could create a disqualification risk. The listing identifies Ottawa, Ontario, while the project title and description refer to CFB Borden. Confirm the actual work location and all mandatory requirements in the official RFP. Review the complete MERX notice, including Amendment No. 1, security requirements, submission instructions, team qualifications, insurance, bonding, experience, and any limits on subcontracting before deciding whether to pursue the opportunity.Official source: https://www.merx.com/public/solicitations/4042480211/abstract?language=EN. Bid Maple is not affiliated with the Government of Canada, and the official tender documents should be treated as controlling.

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

This appears to be an open Defence Construction Canada opportunity for a design-build team to design and construct a new Multifunctional Building for the Ammunition Testing and Experimentation Centre in Nicolet, Quebec. The listing identifies Ottawa, Ontario as the location, but the project description states that construction will take place in Nicolet, Quebec; this should be confirmed in the official documents. Key details: -Buyer: Defence Construction Canada (DCC) -Procurement method: Modified Design-Build -Estimated value: Approximately $15 million -Closing date: October 7, 2026 at 2:00 p.m. — confirm the official MERX system for the controlling closing time and time zone -Submission platform: MERX Electronic Bidding System -Status: Open -Trade agreements: Canadian Free Trade Agreement, CETA and WTO-GPA -Security: The successful contractor is expected to maintain a valid Designated Organization Screening (DOS) issued through PSPC’s Contract Security Program. The RFP should be reviewed for the full security requirements. The tender appears structured for a multidisciplinary design-build team. Listed roles include architects, structural, mechanical, electrical, civil or municipal engineers, sustainable-design specialists, technologists or technicians, a project manager and a superintendent. Pricing items include hourly rates for team classifications, a total weighted classification rate and a maximum upset fee for the contract-award scope of services. This opportunity may be relevant to Canadian construction firms, general contractors, design-build teams, architects and engineering practices with suitable large-project experience and the required security capacity. A business considering a bid should review the complete RFP, mandatory experience and certification requirements, bonding and insurance provisions, site and technical requirements, team-formation rules, and all submission instructions before deciding whether to participate. Questions must be directed only to the point of contact named in the official solicitation; contacting others during the solicitation period could create disqualification risk. Verify every detail, including the project location, closing time, security requirements and current status, in the officialMERX notice before submitting a proposal: https://www.merx.com/public/solicitations/4071890007/abstract?language=EN. Bid Maple is not affiliated with the Government of Canada.

Department of National Defence (DND) - *World, Ottawa, Ontario

This appears to be an open Department of National Defence procurement for spare parts used in material-handling and related vehicles/equipment. The requirement lists 18 line items, including metallic tubing, electrical leads, quick couplings, vehicle lights, hinges, an axle, valves, bearings, pumps and several hydraulic cylinder assemblies. The listed quantities total 23 units, with delivery requested to 25 Canadian Forces Supply Depot (CFSD) in Montreal, Quebec, by December 12, 2026. Offers are to be submitted in Canadian dollars, excluding applicable taxes but including delivery, Canadian customs duties and excise taxes. Equivalent or substitute products may potentially be offered, but the bidder must identify the brand, model and/or part number and the NCAGE. Documents may be submitted in English or French. The notice says offers must be submitted by email only to DLP53Bids [email protected]. The stated closing time is October 7, 2026 at 2:00 p.m. The Crown also indicates it may negotiate with suppliers. Businesses that supply military, industrial, vehicle or material-handling replacement parts may find this opportunity potentially relevant, subject to confirming that they can provide the exact NSN/part-numbered items or acceptable equivalents, meet the delivery schedule and comply with all solicitation requirements. There appears to be a file-number discrepancy: the description identifies W8486-270952/A, while the linked PDF filename refers to W8486-270973. Verify the official tender PDF, closing time, submission instructions, specifications and any mandatory requirements before preparing or submitting an offer. Bid Maple is not affiliated with the Government of Canada.

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be a large construction tender from Defence Construction Canada for work at CFB Edmonton, Alberta. It is for building six rowhouses (4 units each) and two 6-plex apartment buildings, plus related exterior work, parking lot, utility connections, and structural, mechanical, and electrical work. The estimated value is about $23.35 million, with substantial completion due 700 days after award and final completion 30 days later. A key point is that this is the second step in a two-step process, and only general contractors who already responded to the RFEOI are invited to bid. The notice also says bid security is required, and the contract includes an Indigenous Benefits Plan (IBP), which may create opportunities for Indigenous-owned and -led businesses. A non-mandatory site visit is scheduled for September 3, 2026 at the DCC office in Building 177, CFB Edmonton. The tender is open, with a closing time of October 7, 2026 at 4:00 PM local time. Bidding and documents are on MERX, and questions must go only to the named contact in the notice. As always, it is important to verify the official tender documents and the MERX notice carefully before deciding whether to pursue or submit a bid.

Department of Natural Resources (NRCan) - *British Columbia, *Canada, Ottawa, Ontario

This appears to be an open tender from Natural Resources Canada (NRCan) for electrical services at the Pacific Forestry Centre in Victoria, British Columbia. The contractor would provide electrical labour and materials on an “as and when required” basis, including maintenance, repairs, upgrades, and work intended to keep the facility’s electrical systems safe, reliable, and code-compliant. The opportunity may be relevant to Canadian electrical contractors able to service the Pacific Forestry Centre and respond to work requests as needed. The notice lists a closing date of October 8, 2026, at 5:00 p.m. However, the tender metadata also identifies Ontario/Ottawa, which may be an administrative or location-record issue; the official documents should be checked to confirm the work location, submission process, required qualifications, insurance, certifications, security requirements, and contract terms. Before considering a bid, review the full official tender notice and all attachments, confirm the deadline and submission instructions, and verify that your business can meet every stated requirement.The available tender PDF is: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105928/189703---nrcan-5000097120---itt---electrical-services---as-and-when-for-pfc.pdf

Department of National Defence (DND) - *Alberta *Canada *Quebec (except NCR), *Canada, Ottawa, Ontario

**Tender summary — Spare Parts for Airfield Ground Support Equipment 2** The Department of National Defence (DND) is seeking various replacement parts for airfield ground support equipment under file **W8486-270982/A**. The tender appears relevant to Canadian businesses that manufacture, distribute, or can source the specified vehicle and equipment parts. **Closing date:** October 11, 2026 at 2:00 p.m. **Requested delivery:** By December 31, 2026 **Delivery locations:** - 7 Canadian Forces Supply Depot (CFSD), Edmonton, Alberta - 25 CFSD, Montreal, Quebec The requirement includes 22 line items, with quantities split between Edmonton and Montreal. Items include bushings, filler caps, linear actuating cylinders, filters, vehicle heaters, horn buttons, windshield-washer nozzles, leaf-spring shackle pins, solenoids, switches, gas springs, engine starters, and vehicle windows. The parts are identified by National Stock Numbers (NSNs), manufacturer part numbers, and NCAGE **38144**. Several parts are requested for delivery to both locations. Bidders must submit prices in **Canadian dollars**, excluding applicable taxes. Pricing must include delivery, Canadian customs duties, and excise taxes. Businesses proposing equivalent or substitute products must provide the offered brand name, model or part number, and NCAGE. The notice states that offers may be submitted in either official language and that the Crown may negotiate with suppliers. The available description is truncated, so important details—such as complete submission instructions, evaluation requirements, contracting authority information, and any security or supplier conditions—should be confirmed in the full tender documents. **Official tender document:** https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106063/w8486-270982_-pd-july_rob_2-rfp-eng.pdf This opportunity potentially matches a supplier able to provide the exact parts or acceptable equivalents and meet the two-location delivery requirement. This does not confirm that any particular business qualifies or that its products will be accepted. Review the complete official notice and attachments, verify the closing time and all requirements, and follow the stated submission process before preparing a bid.

Department of Agriculture and Agri-Food (AAFC) - *Canada, *Unspecified, Regina, Saskatchewan

This open tender appears relevant to plumbing contractors able to serve two Saskatchewan federal research facilities: the AAFC Saskatoon Research and Development Centre at 107 Science Place, Saskatoon, and the Canada-Saskatchewan Irrigation Diversification Centre at 901 Mc Kenzie Street South, Outlook. AAFC is seeking a contractor for plumbing services under an expected one-year contract beginning December 1, 2026. The contract may be extended for up to three additional one-year periods. Key requirements and conditions: - A mandatory site visit is scheduled for September 22, 2026, at 10:00 a.m. CST. The bidder or its representative must attend. Attendance should be confirmed with Zack Flamont at 639-560-3462 or [email protected]. - Personnel requiring access to sensitive work sites must hold, or be approved for, Reliability Status security clearance through AAFC. - Offers must satisfy all mandatory technical and other solicitation requirements. - The responsive offer with the lowest evaluated aggregate price is expected to be recommended for award. - The opportunity is open to Canadian suppliers and suppliers from applicable trading partners. - Offers may be submitted electronically through Canada Post’s CPC Connect service, following the instructions in Part 4 of the solicitation. - Submissions may be made in English or French. The stated closing deadline is October 13, 2026, at 4:00 p.m. The tender notice indicates that the official solicitation documents contain the complete technical, financial, security, submission, and contractual requirements. Before deciding whether to bid, review the official solicitation PDF and all amendments on Canada Buys. Confirm the mandatory site-visit procedure, plumbing scope, insurance and licensing requirements, security-clearance process, pricing format, and submission deadline. Canada Buys may post amendments without separately notifying bidders, so the notice should be monitored regularly.Official document: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105744/rfp-wsc-2627-085---english.pdf. Bid Maple is not affiliated with the Government of Canada.

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

Defence Construction Canada (DCC) appears to be seeking proposals from design-build teams for a new 250-person modular office complex at CFB Edmonton. The project would use a modified design-build approach, with an estimated construction value of approximately $14.8 million. The opportunity is listed as open, with proposals due through the MERX Electronic Bidding System by October 14, 2026, at 2:00 p.m. The tender data identifies Ottawa, Ontario as the location, but the project description identifies CFB Edmonton, Alberta. This discrepancy should be confirmed in the official RFP documents. The required team may involve architects, sustainable-design specialists, structural, mechanical, electrical, civil or municipal engineers, technologists, project managers, a superintendent, an Indigenous relations coordinator, and an industrial security manager. The tender information includes hourly-rate categories for these roles, suggesting that detailed team composition and pricing requirements will be set out in the RFP. A selected contractor will be required to hold a valid Designated Organization Screening (DOS) issued through PSPC’s Contract Security Program. Security requirements are reportedly detailed in Amendment No. 1. The procurement is being conducted under CFTA, CETA, and WTO-GPA requirements. Potentially interested businesses should review the complete RFP, amendments, mandatory qualifications, insurance and bonding requirements, security rules, submission instructions, and any teaming or subcontracting provisions. Questions must be sent only to the point of contact named in the advertisement; contacting others during the solicitation period could result in disqualification.Official source: https://www.merx.com/public/solicitations/4069202205/abstract?language=EN This summary is based on the tender information provided and does not determine whether a business qualifies. Verify the official MERX notice and all RFP amendments before deciding to bid or submitting a proposal.

Department of National Defence (DND) - *Edmonton *Montréal, *World, Ottawa, Ontario

This open tender from Canada’s Department of National Defence (DND) appears to seek 27 line items of vehicular equipment components, including seals, bearings, bushings, filters, batteries, valves, gaskets, electrical parts, and other vehicle-related components. Quantities range from 1 to 50 units, with several items requiring delivery to both locations. Key details: -File number: W8486-270966/SV -Closing date: October 14, 2026 at 2:00 p.m. -Required delivery: By December 31, 2026 -Delivery locations: Canadian Forces Supply Depot Edmonton, Alberta, and Canadian Forces Supply Depot Montréal, Quebec -Pricing: Offers must be in Canadian dollars, excluding applicable taxes, but including delivery, Canadian customs duties, and excise taxes - The notice identifies each item by National Stock Number (NSN), part number, NCAGE, quantity, and destination. This may be relevant to Canadian businesses that can source and supply the specified parts, meet the exact NSN and part-number requirements, and deliver to the two military supply depots by the required date. The tender includes an RFP and listed questions/amendment documents, so bidders should review all of them for specifications, submission instructions, certifications, contractual terms, and any changes to the closing date or requirements. The information provided does not establish that any particular business qualifies or can meet the requirements. Verify the complete official tender notice and all amendments on Canada Buys before preparing or submitting a bid.

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

This tender appears to be a large federal construction opportunity from Defence Construction Canada (DCC) for design-builder services to design and construct multi-unit residential housing for the Canadian Forces Housing Agency. It potentially includes three separate contracts: CFB Gagetown, NB; 14 Wing CFB Greenwood, NS; and CFB Halifax (12 Wing Shearwater), NS.The estimated values are very large: about $295M–$370M for Gagetown, $105M–$131M for Greenwood, and $174M–$218M for Halifax. The notice says proposals are to be submitted through MERX by October 15, 2026 at 2:00 PM, though the description shows earlier date changes, so the official MERX notice should be checked carefully for the current deadline. The work appears relevant for firms that can provide a full design-build team, including roles such as design team lead, architects, structural, mechanical, electrical, civil/municipal engineers, and urban planning support. The solicitation is tied to CFTA, CETA, and WTO-GPA rules, and bidders are warned to send questions only to the listed point of contact. For a Canadian business owner, this looks like a major opportunity if your company is part of a larger design-build consortium or prime team with experience in multi-unit housing and federal projects. However, you should verify the official MERX tender notice, all amendments, eligibility requirements, security or bonding needs, and submission instructions before deciding whether to bid.

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

This tender appears to be a major Canadian defence-related construction opportunity from Defence Construction Canada (DCC). It is an open request for proposals for design-builder services using a modified design-build approach to design and construct multi-unit residential housing for the Canadian Forces Housing Agency in Quebec. There appear to be three separate contracts tied to three locations: 3 Wing CFB Bagotville, Montreal (Saint-Hubert), and CFB Valcartier. The estimated project values are very large: about $105–$131 million for Bagotville, $88–$109 million for Montreal (Saint-Hubert), and $486–$608 million for Valcartier. The closing date shown is October 15, 2026 at 2:00 PM, but the notice should be verified on MERX and in the official tender documents because dates and details can change. The notice says proposals must be submitted through the MERX Electronic Bidding System, and questions must go only to the listed point of contact. It also references trade agreement rules (CFTA, CETA, WTO-GPA) and DCC’s prompt payment information for contractors. For a Canadian business owner, this appears relevant if your company works in large-scale residential construction, design-build delivery, architecture, engineering, or as part of a qualified prime/design-build team. However, you should verify the official notice and the RFP documents to confirm the exact requirements, scope, bid format, teaming expectations, and any security, licensing, or experience conditions before deciding whether to bid.

Department of Agriculture and Agri-Food (AAFC) - *Kentville, *World, Kentville, NS

Agriculture and Agri-Food Canada (AAFC) is seeking one liquid chromatography (LC) system for its Kentville Research and Development Centre in Kentville, Nova Scotia. The procurement is open and is listed with a closing date of October 19, 2026 at 2:00 p.m.; however, suppliers must confirm the actual solicitation closing time in the tender documents because this notice states that the published date may only indicate the notice-publication period. This opportunity is restricted to suppliers already pre-qualified under Supply Arrangement E60PV-19EQUI for laboratory and scientific equipment, parts, accessories, services and supplies. Suppliers that do not hold this arrangement cannot submit an eligible bid for this requirement. Businesses not currently pre-qualified may apply for the supply arrangement separately by reviewing document E60PV-19EQUI/D on Canada Buys, but that process may not make them eligible for this specific solicitation. The system appears to need advanced proteomics capability, potentially including nano-flow liquid chromatography suitable for coupling with mass spectrometry. Key mandatory requirements include: - Flow rates from at least 200 nL/min to 100 µL/min without a flow splitter; - Maximum operating pressure of at least 15,000 psi; - Operation across pH 2–10; - Two-dimensional LC capability with specified pumps, valves, trapping, switching and nano-Lock spray functions; - Unattended operation and diagnostic monitoring for up to 96 hours; - Solvent storage for up to three eluents; - A micro-binary solvent delivery system with specified precision, conditioning, priming and active-wash functions; - An autosampler supporting 0.1–100 µL injections, multiple injection modes, temperature control from 4–40°C, and 48- or 96-position plates; - A temperature-controlled column chamber; and - Canadian Electrical Code approval and CSA certification upon delivery. The apparent award method is lowest aggregate price among suppliers that meet every mandatory technical criterion. A business considering this opportunity should confirm that it holds E60PV-19EQUI, map its proposed system against every mandatory requirement, and review all bid instructions, delivery terms and the official solicitation before submitting anything. The supplied source is a Canada Buys PDF notice; verify the current official tender record and solicitation documents directly on Canada Buys, as Bid Maple is not affiliated with the Government of Canada.