Parcourez les contrats gouvernementaux canadiens actifs.

Department of Public Works and Government Services (PSPC) - *Alberta *British Columbia *Manitoba *Quebec (except NCR), Gatineau, Quebec

**Tender:** 21C81-267106 – Cotton Toweling **Buyer:** Public Services and Procurement Canada (PSPC) **Status:** Open **Closing date:** October 13, 2026, at 2:00 p.m. — confirm the applicable time zone in the official notice. This opportunity appears to be for the supply of cotton toweling. The listed delivery or performance areas are Alberta, British Columbia, Manitoba, Quebec outside the National Capital Region, and Gatineau, Quebec. The category is listed as *GD, but the available information does not provide quantities, required specifications, contract value, delivery schedule, evaluation criteria, or submission instructions. The description mainly contains standard wording about Canada’s Reciprocal Procurement Policy. It does not, by itself, clearly identify which supplier eligibility rules apply to this particular solicitation. Canadian suppliers may potentially be relevant, but the applicable requirements must be confirmed in the official tender documents. Review the official notice and any attached documents before deciding whether to bid. In particular, verify the toweling specifications, quantities, delivery requirements, mandatory certifications, supplier eligibility, bid format, closing time, and any amendments.Official source: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110018961?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *Alberta, Gatineau, Quebec

This appears to be an open request for proposals from Public Works and Government Services Canada (PSPC) for work at the Agriculture and Agri-Food Canada Lethbridge Research and Development Centre in Lethbridge, Alberta. The contract may involve a combined package of professional services, construction, financing, training, and measurement and verification for energy-efficiency improvements. The procurement is also subject to requirements concerning greenhouse-gas emissions disclosure and emissions-reduction targets. The closing deadline is October 13, 2026, at 2:00 p.m. Late submissions will not be accepted. All questions and other bid communications must be sent only to the identified Contracting Authority through the “Event Messages” tab in Canada Buys/SAP Ariba; using another channel could result in a non-responsive bid. The listing identifies Alberta and Gatineau, Quebec, while the project description places the work in Lethbridge, Alberta. This location information should be confirmed in the official solicitation documents. No supporting documents were provided in the listing, so important details such as mandatory qualifications, bonding, security, insurance, submission format, site-visit requirements, and evaluation criteria remain to be verified. This opportunity may be relevant to businesses or teams with capabilities in energy-efficiency design and construction, project financing, training, and performance measurement. It is not possible to determine from the listing whether your business qualifies. Review the complete official notice and all attachments in Canada Buys/SAP Ariba before deciding whether to bid or submitting a proposal: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110012743?an Id=ANONYMOUS

Canadian Food Inspection Agency (CFIA) - *Canada, Ottawa, ON

The Canadian Food Inspection Agency (CFIA) appears to be seeking a supplier for a Computerized Maintenance Management System (CMMS) delivered as Software as a Service (SaaS), along with implementation and support services. Potentially relevant businesses may include CMMS software providers, maintenance-management technology companies, and firms able to provide system setup, user training, support, and possibly data migration. The system is intended to help CFIA facility managers create workflows for maintenance activities on CFIA properties. Expected requirements include: - CMMS SaaS licences - Basic installation assistance and guidance on system features - Virtual user training and ongoing support - Optional data transfer, depending on CFIA’s operational needs The anticipated contract would run for one initial year, with four additional one-year option periods. The tender is listed as open and identifies Ottawa, Ontario/Canada as the location. The stated closing date is October 14, 2026, at 2:00 p.m.; bidders should confirm the applicable time zone and any submission instructions in the official documents. This opportunity potentially matches a Canadian business that can supply and support a CMMS platform, but the summary does not establish eligibility or compliance. Before deciding to bid, review the complete official RFP and Notice of Proposed Procurement for mandatory requirements, technical specifications, security or hosting conditions, pricing rules, evaluation criteria, Indigenous or subcontracting requirements, and submission procedures. Verify all details and amendments on the official tender record before submitting a bid. Documents provided: -RFP: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105486/2026-00188-request-for-proposal-%28rfp.pdf -Notice of Proposed Procurement: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105486/2026-00188-notice-of-proposed-procurement-%28npp.pdf

Department of Public Works and Government Services (PSPC) - *Québec, Gatineau, Quebec

## Tender summary **Opportunity:** W7701-268094 – Software development, modelling and simulation **Buyer:** Public Services and Procurement Canada (PSPC), on behalf of Defence Research and Development Canada (DRDC) **Status:** Open **Closing date:** October 15, 2026 at 2:00 p.m. **Location:** Valcartier Research Center, Québec/Gatineau region, Quebec **Category:** Services ### What the work appears to involve DRDC is seeking specialized services for: - Software development - Modelling and simulation - Research and development support - Analysis and evaluation of military systems and capabilities The detailed requirements are expected to be set out in the Statement of Work. The services would support work at or for the Valcartier Research Center. ### Potentially relevant businesses This opportunity appears potentially relevant to Canadian firms with experience in defence-related software engineering, modelling and simulation, scientific or technical research, systems analysis, and evaluation of military technologies or capabilities. The notice provided does not include enough information to determine requirements such as mandatory certifications, security clearances, personnel qualifications, Indigenous or small-business considerations, contract term, pricing format, or submission instructions. ### Next steps Review the official tender notice and all attachments carefully, including the Statement of Work, mandatory requirements, security requirements, evaluation criteria, amendment notices, and bid submission process. Businesses should verify their ability to meet every requirement directly in the official notice before submitting a bid. **Official source:** https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110024428?an Id=ANONYMOUS

Canada Post Corporation - Ottawa, Ontario

Canada Post Corporation is seeking one service provider for Phase 1 of a Maximo Spare Parts Management project. The work appears to include providing software, implementing the solution, integrating it with existing systems, and delivering ongoing support. The objective is to improve the quality, accuracy, governance, and sustainability of spare-parts master data in IBM Maximo. The tender is listed as open and is associated with Ottawa, Ontario. The closing deadline is October 15, 2026, at 2:00 p.m. The solicitation category is listed as *SRV. Bidding documents are available through MERX, and the requirement details are referenced in a Canada Post Ariba Sourcing event. MERX fees may apply. This opportunity may be relevant to businesses offering IBM Maximo services, enterprise software implementation, systems integration, master-data management, and technical support. The available information does not confirm the mandatory qualifications, contract terms, security requirements, evaluation criteria, insurance, or submission instructions. Review the complete official tender notice and MERX/Ariba documents before deciding whether to bid, and verify the deadline and submission process directly with the buyer.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

**Tender:** 5P052-240474 – Parks Canada Uniform Program **Buyer:** Public Works and Government Services Canada (PSPC), for Parks Canada. **Status:** Open. Closing date is **October 15, 2026, at 2:00 p.m.** Late submissions will not be accepted. **What is being requested:** Parks Canada is seeking a contractor to provide a **Managed Clothing Solution** for its uniform program. The work appears to cover the full supply chain, including acquiring or manufacturing uniforms, managing inventory, and distributing clothing to Parks Canada locations. **Contract term:** Four-year initial contract, with up to five additional option years. **Supplier restrictions:** The notice states that the solicitation is open only to Canadian suppliers and suppliers from an applicable trading partner, under the Government of Canada policy on prioritizing Canadian suppliers and Canadian content. This does not confirm that any particular business is eligible. **How to access and bid:** The solicitation can only be downloaded after logging into a SAP Ariba account and completing a Government of Canada profile. Suppliers should be fully registered in Canada Buys/SAP Ariba. Questions must be submitted through the event’s **Messages** tab, not the public Q&A section. Amendments may appear in the event Messages tab or Event Contents section, so both should be checked regularly. This opportunity appears potentially relevant to businesses able to manage uniform sourcing or manufacturing, inventory, and distribution at a national scale. The official tender documents were not included in the listing, so important requirements—such as specifications, mandatory qualifications, security or financial conditions, evaluation criteria, and submission instructions—still need to be reviewed. Verify all details, amendments, deadlines, and eligibility requirements in the official SAP Ariba/Canada Buys notice before deciding whether to submit a bid.

Public Works and Government Services Canada - *Northwest Territories *Yukon *New Brunswick *Manitoba *Saskatchewan *Alberta *Quebec (except NCR) *Nova Scotia *Newfoundland and Labrador *Ontario (except NCR) *Prince Edward Island *British Columbia, Gatineau, Quebec

This tender appears relevant for businesses that supply electric vehicle charging equipment and related data services. Public Works and Government Services Canada is seeking Supply Arrangements, not a one-time contract,for EVSE across four groups: Level 2 networked chargers; Level 1 and Level 2 non-networked chargers; DC fast charging networked chargers; and DC fast charging non-networked chargers. Suppliers may bid for one or more groups. It is open to interested suppliers and uses a lowest/lower-bid competitive strategy. The arrangement appears to cover locations across Canada, including areas under comprehensive land claims agreements, with an exception for locations within the Nunavut Land Claims Agreement. Documents may be submitted in either official language. A key point is that this is a pre-qualification process: only suppliers awarded a Supply Arrangement would later be able to bid on individual RFPs. The notice says the RFSA is open for five years and there is an ongoing opportunity for new suppliers to qualify. The closing date shown is 2026-10-15 at 14:00. Because tender details can change, you should verify the official notice and the attached documents before deciding whether to pursue it or submit anything.

Canada Revenue Agency (CRA) - *Canada, *World, Ottawa, Ontario

The Canada Revenue Agency (CRA) is seeking suppliers for its Professional Services Supply Chain (PSSC), covering IT and certain non-IT professional services. Successful contractors would provide consultants on an as-needed basis, mainly to the CRA’s Information Technology Branch in the National Capital Region, although work may come from other CRA branches and locations. Assignments may be remote or in person. The contract period is expected to run from April 1, 2027 to March 31, 2029, with up to three additional one-year extensions. CRA plans to rank responsive bids and award contracts to the five highest-ranked bidders. After that, individual requirements would generally be competed among those contractors. A potentially important requirement is that a bidder must be able to supply consultants for every listed category and level after award. The solicitation also includes security requirements, is limited to Canadian suppliers and bidders from applicable trading partners, and may apply the federal policy on prioritizing Canadian suppliers and Canadian content. The Federal Contractors Program for employment equity applies. Proposal materials must be submitted in English or French. The stated closing deadline is October 16, 2026 at 2:00 p.m. The tender indicates that bids must be submitted through Canada Post’s Connect service. Bidders must first ask CRA to open a Connect conversation using [email protected]; sending the proposal directly to that email address will not be accepted. Questions are to be sent in writing to [email protected]. CRA reports declining historical PSSC spending and warns that professional-services procurement may continue to decrease because of federal spending reductions. This may affect the volume of future work and should be considered when assessing the opportunity. This opportunity appears most relevant to a supplier with broad coverage across all required professional-service categories and levels, the ability to meet federal security and employment-equity obligations, and experience responding to large, competitive government procurements. The information provided does not establish whether any particular business qualifies. Before deciding to bid, review the complete official RFP, financial proposal documents, bidder billable-hours information, and all amendments—especially Amendment 001—and confirm the exact mandatory requirements, security levels, category definitions, evaluation method, forms, pricing rules, and Connect submission procedure. Verify the deadline and all details in the official tender notice before submitting a bid.

Department of Agriculture and Agri-Food (AAFC) - *Kentville, *World, Kentville, NS

This appears to be an open Government of Canada procurement by Agriculture and Agri-Food Canada for one liquid chromatography (LC) system for the Kentville Research and Development Centre in Kentville, Nova Scotia. The listed notice closing date is October 19, 2026 at 2:00 p.m.; however, suppliers are specifically instructed to rely on the solicitation documents for the actual bid closing date and requirements. The opportunity is restricted to suppliers already pre-qualified under Supply Arrangement E60PV-19EQUI for laboratory and scientific equipment. Businesses that do not hold this Supply Arrangement cannot submit an evaluated bid for this procurement. Suppliers may apply to qualify under the Supply Arrangement separately through Canada Buys, using solicitation document E60PV-19EQUI/D, but that qualification process is separate from this tender. The proposed system must meet detailed mandatory technical requirements, including suitability for proteomics and potential coupling with mass spectrometry, nano-flow operation without a flow splitter, flow rates from at least 200 nL/min to 100 µL/min, operating pressure of at least 15,000 psi, pH operation from 2 to 10, and 2D LC capability. It must also support unattended operation for up to 96 hours, accommodate up to three eluents, provide specified solvent delivery and washing functions, and include an autosampler with injection volumes from 0.1 to 100 µL, temperature control from 4 to 40°C, sample plate or vial capacity, and a temperature-controlled column chamber. The equipment must comply with the Canadian Electrical Code and be CSA certified upon delivery. Among invited and responsive Supply Arrangement holders, the contract is expected to be recommended to the bidder meeting all mandatory technical criteria with the lowest aggregate price. A business should carefully compare its proposed equipment and certifications against every mandatory criterion before responding. Verify the official tender notice, solicitation documents, Supply Arrangement status, submission instructions, and closing time on Canada Buys before preparing or submitting a bid. Bid Maple is not affiliated with the Government of Canada.

Canada Revenue Agency (CRA) - *British Columbia *Canada *Ontario (except NCR) *Saskatchewan *Newfoundland and Labrador *Nova Scotia *Prince Edward Island *National Capital Region (NCR) *New Brunswick *Alberta *Quebec (except NCR) *Manitoba, *Canada, Ottawa, Ontario

The Canada Revenue Agency (CRA) is seeking Canadian suppliers to provide parts and labour for its Integrated Security System across CRA locations in Canada. Services may include technical support, programming, installation, repairs, maintenance, and related security-system work on an “as and when requested” basis. The requirement potentially matches businesses experienced with Kantech access-control and intrusion-detection systems, Digital Security Controls (DSC) systems, security-system integration, and ongoing service support. CRA is considering converting up to 51 sites to a unified Kantech platform, but the stated site numbers are for planning only and do not guarantee any work volume. Bidders may submit for one or more of five regions: -National Capital Region: up to 11 potential sites -Ontario: up to 13 -Quebec: up to 1 -Atlantic: up to 4 -Western: up to 22 The CRA expects to award up to five contracts, with each region evaluated separately. The initial term is three firm years, with four possible one-year extensions. The contract may allow CRA to add, remove, or modify products and sites. The listed closing date is October 19, 2026 at 2:00 p.m. The applicable time zone and any submission cut-off details should be confirmed in the official solicitation. Questions are to be sent in writing to [email protected]. Bids must be submitted through Canada Post’s Connect service. The CRA Bid Receiving Unit email ([email protected]) is used to request that CRA open a Connect conversation; bids should not be emailed directly to that address. Proposal materials may be submitted in English or French. Security requirements apply, and the Federal Contractors Program for employment equity applies. The notice also indicates that the procurement is open only to eligible Canadian suppliers and suppliers covered by applicable trade agreements; the complete eligibility rules, mandatory certifications, experience requirements, security clearances, technical criteria, and pricing format must be reviewed in the RFP. The current solicitation, 1000536720/B, replaces an earlier version. Review the official RFP and financial-proposal spreadsheet before deciding whether to prepare a bid.Documents provided with the notice are: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106161/1000536720b-security-system-services-rfp.pdf and https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106161/1000536720b-financial-proposal.xlsx. This summary does not confirm that any business qualifies; all requirements and submission instructions should be verified against the official tender notice before submitting.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be an open Innovation for Defence Excellence and Security (IDEaS) challenge led by Public Works and Government Services Canada for the Department of National Defence and Canadian Armed Forces. The challenge seeks software-based solutions that can convert, analyze, and combine real-time radio-frequency (RF) data into secure, standardized, machine-readable command-and-control information. Potentially relevant solutions could include standalone software, plug-ins, middleware, or services that help process and exchange data over bandwidth-limited or disrupted military communications networks. The notice refers to interoperability across land, air, maritime, cyber, and space operations, and alignment with XML-based or other standardized messaging formats used in military and coalition environments. The challenge is open to proposed technologies at technology readiness levels (TRLs) 1 through 9 and may result in multiple contracts. Indicative maximum funding is: - Component 1a (TRL 1–3): up to $250,000 CAD, for up to 6 months - Component 1b (TRL 4–5): up to $1,500,000 CAD, for up to 12 months - Component 2 (TRL 6–9): up to $5,000,000 CAD; the performance period would be negotiated These are maximum amounts and do not guarantee that funding will be awarded. The notice states that proposals should be submitted through the Defence Innovation Portal after reviewing the challenge and the applicable IDEaS Call for Proposals. The listed closing date is October 20, 2026, at 2:00 p.m. The location is identified as Canada, Gatineau, Quebec, although the opportunity appears to focus on submitting and developing an innovative solution rather than supplying goods to a single physical site. A Canadian business with relevant RF communications, data-fusion, military messaging, interoperability, cybersecurity, or machine-readable data technologies may find this opportunity potentially relevant. However, this summary does not determine eligibility or suitability. Review the complete official challenge notice, the IDEaS Call for Proposals, any amendments, submission instructions, security or technical requirements, and the Defence Innovation Portal before preparing or submitting a proposal. Verify the deadline and all requirements in the official documents, including the linked PDF notice and Amendment 2.

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be an Advance Procurement Notice, not an active bid request yet. Defence Construction Canada’s Western Region is notifying industry about a potential future project at 4 Wing Cold Lake,Alberta: replacement of the Airfield Lighting Power Centre (ALPC). The estimated value is about $11.1 million, with a possible solicitation anticipated in Fall 2026, but the project is still conditional on DND approval and may not proceed. The work potentially includes civil/site preparation, design and construction of a new prefabricated steel ALPC building, electrical and control systems, airfield lighting cabling, generator and fuel system work, commissioning, and removal of the existing building and related systems. The notice also mentions associated airfield electrical work and compliance with CSA Z463-18.A key point is security: the anticipated requirement is Designated Organization Screening (DOS). Contractors interested in bidding are being encouraged to start the sponsorship/security clearance process early through DCC’s Industrial Security Program. For a Canadian contractor, this appears relevant if your business handles design-build construction, electrical/airfield lighting, industrial buildings, or DND/airport-type infrastructure. However, you should verify the official notice and future solicitation carefully for exact scope, security requirements, bonding, qualifications, and submission rules before taking any action.