Parcourez les contrats gouvernementaux canadiens actifs.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Québec

This appears to be an Innovative Solutions Canada (ISC) Phase 2 challenge sponsored by the Department of National Defence and Canadian Army. The goal is to develop a domestically produced uncrewed aircraft system (UAS) for delivering cargo and munitions in battlefield conditions. The proposed system is expected to include an aircraft, mission sensors, ground control station, radio link, batteries and multi-battery charger, and a remote antenna positioned about 100 metres from the control station. Mandatory requirements listed in the notice include: - Operation at approximately -20°C to +40°C; - Operation in winds of at least 40 km/h; - Operation in light rain or snow; - Minimum payload capacity of 5 kg; - Maximum takeoff weight under 25 kg, including payload; and - At least a 10 km operational radius and 30 minutes of continuous movement while carrying the required payload. The full official notice should be reviewed for the remainder of the requirements. This challenge is stated to accept proposals only for Phase 2 prototype development, with proposed technologies in the stated technology readiness level range of TRL 5 to TRL 9. The funding mechanism is a contract. Applications are directed through the Innovative Solutions Canada challenge process and must follow the broader Call for Proposals 004 requirements. Key dates: -Opening: August 24, 2026 -Closing: October 5, 2026 at 2:00 p.m. Eastern Time -Listed location: Gatineau, Quebec / Canada Amendments have added questions and answers and instructions concerning attachments. A Canadian business with relevant UAS design, aerospace engineering, ruggedized systems, autonomous navigation, payload delivery, or defence-prototype capabilities may find this potentially relevant, but the available information does not establish eligibility or compliance. Review the official challenge page, Call for Proposals 004, complete requirements, submission instructions, and all amendments before deciding whether to submit. Verify the closing time and current documents on the official tender notice before bidding.

Department of Agriculture and Agri-Food (AAFC) - *Saskatoon, *Saskatchewan, Winnipeg, Manitoba

Agriculture and Agri-Food Canada (AAFC) appears to be seeking a contractor for inspection services involving fire alarm systems, sprinkler systems, backflow preventers, and fire hydrants. Thework is described for two AAFC locations: 107 Science Place and 410 Lowe Road in Saskatoon, Saskatchewan. The tender is listed as open and closes on October 6, 2026, at 1:00 p.m. The tender data also mentions Winnipeg, Manitoba, and shows “MA” as the province, which appears inconsistent with the description. This should be clarified by reviewing the official tender documents. Two English request-for-proposal PDFs are provided. Businesses with relevant inspection capabilities may find this opportunity potentially relevant, but the notice does not establish eligibility. Before deciding whether to bid, review the complete official documents for mandatory certifications, licensing, insurance, site requirements, service frequency, submission instructions, evaluation criteria, and any amendments. Verify all dates, locations, and requirements in the official tender notice before submitting a bid.

Department of Public Works and Government Services (PSPC) - *Calgary, Gatineau, Quebec

This appears to be an open PSPC construction tender for replacing walk-in cooler and freezer rooms at the CFIA Calgary Laboratory, including demolition of an existing cooler room. The successful contractor would be expected to provide the labour, materials, tools, equipment, transportation, installation, testing, commissioning, and a fully operational system in accordance with applicable codes and the tender documents. Key details: -Location: CFIA Laboratory, 3650 36th Street NW, Calgary, Alberta, T2L 2L1 -Closing date: October 6, 2026 at 2:00 p.m. The applicable time zone should be confirmed in the official notice. -Mandatory site visit: September 15, 2026 at 10:00 a.m. MDT -Site visit requirement: A bidder representative must attend and sign the attendance sheet. The notice states that bids from bidders who did not sign the sheet will be rejected. -Buyer: Department of Public Works and Government Services Canada (PSPC) - Tender reference/title: EP922-270205 — CFIA Calgary Lab Replacement Walk-In Freezer and Cooler This may be relevant to businesses experienced in commercial or institutional refrigeration, cold-room construction, demolition, mechanical/electrical work, and general contracting. The available listing shows a location/province inconsistency, so the official tender notice should be checked carefully for the correct project location, submission process, mandatory requirements, specifications, insurance, bonding, certifications, and complete work sequence. Late submissions will not be accepted. Review the official notice and all attached documents before deciding whether to prepare and submit a bid.

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

This appears to be an open Defence Construction Canada opportunity for a design-build team to design and construct a new Multifunctional Building for the Ammunition Testing and Experimentation Centre in Nicolet, Quebec. The listing identifies Ottawa, Ontario as the location, but the project description states that construction will take place in Nicolet, Quebec; this should be confirmed in the official documents. Key details: -Buyer: Defence Construction Canada (DCC) -Procurement method: Modified Design-Build -Estimated value: Approximately $15 million -Closing date: October 7, 2026 at 2:00 p.m. — confirm the official MERX system for the controlling closing time and time zone -Submission platform: MERX Electronic Bidding System -Status: Open -Trade agreements: Canadian Free Trade Agreement, CETA and WTO-GPA -Security: The successful contractor is expected to maintain a valid Designated Organization Screening (DOS) issued through PSPC’s Contract Security Program. The RFP should be reviewed for the full security requirements. The tender appears structured for a multidisciplinary design-build team. Listed roles include architects, structural, mechanical, electrical, civil or municipal engineers, sustainable-design specialists, technologists or technicians, a project manager and a superintendent. Pricing items include hourly rates for team classifications, a total weighted classification rate and a maximum upset fee for the contract-award scope of services. This opportunity may be relevant to Canadian construction firms, general contractors, design-build teams, architects and engineering practices with suitable large-project experience and the required security capacity. A business considering a bid should review the complete RFP, mandatory experience and certification requirements, bonding and insurance provisions, site and technical requirements, team-formation rules, and all submission instructions before deciding whether to participate. Questions must be directed only to the point of contact named in the official solicitation; contacting others during the solicitation period could create disqualification risk. Verify every detail, including the project location, closing time, security requirements and current status, in the officialMERX notice before submitting a proposal: https://www.merx.com/public/solicitations/4071890007/abstract?language=EN. Bid Maple is not affiliated with the Government of Canada.

Department of the Environment (ECCC ) - *Canada, Gatineau, QC

This open Government of Canada opportunity appears to seek a consultant or research team to study the economic impacts of decarbonizing Canada’s rail sector for Environment and Climate Change Canada (ECCC). Key details: -Solicitation number: 5000096225 -Closing date: October 8, 2026 at 2:00 p.m. The time zone should be confirmed in the official notice. -Contract period: From contract award until March 31, 2027 - Maximum available funding: $70,000, plus applicable taxes. Offers above this amount are expected to be considered non-compliant. -Evaluation: Technical merit is weighted at 70% and price at 30%, using the highest combined rating. -Requirements: Bidders must follow the financial instructions in the Basis of Payment and meet the mandatory and point-rated technical criteria in the Technical Criteria annex. -Security: No security requirements are identified in the provided summary. -Location: Canada, with Gatineau, Quebec listed. The opportunity may be relevant to firms with experience in economic research, transportation or rail-sector analysis, decarbonization, climate policy, and preparing evidence-based studies. The provided information does not confirm the detailed qualifications, deliverables, methodology, personnel requirements, or submission instructions. The tender also refers to federal integrity, Code of Conduct, anti-forced-labour, former-public-servant certification, and other procurement requirements. Participation in the Net-Zero Challenge is encouraged, but the excerpt does not identify it as a mandatory requirement. Before deciding whether to bid, review the complete official PDF, including all annexes, mandatory criteria, submission deadlines and instructions, pricing format, evaluation rules, and any amendments.The available document is: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106048/5000096225_rfp_en-final_0.pdf. Bid Maple is not affiliated with the Government of Canada, and the official tender notice should be treated as controlling.

Department of National Defence (DND) - Ottawa, On

The Department of National Defence (DND) is seeking Back Face Protection Plates (BFPP) for body armour systems used by the Canadian Armed Forces. This appears potentially relevant to Canadian businesses that manufacture or supply protective armour components and can meet the technical, testing, and procurement requirements. The opportunity is listed as open and closes on October 8, 2026, at 2:00 p.m. The listed location is Ottawa, Ontario. The requirement is limited to Canadian goods. The Statement of Work and Request for Proposal provide the basic requirements. More sensitive information—including drawings, technical specifications, the bid evaluation plan, and testing methods—will only be provided to interested offerors that sign the required non-disclosure agreement (NDA). Completed NDA forms may be sent to [email protected], as stated in the notice. Several tender documents and amendments are provided, including the RFP, Statement of Work, pricing schedules, and Amendments 1 and 2. Before deciding whether to bid, review the complete official tender notice and all amendments, confirm the closing time and submission instructions, assess the Canadian-goods requirement, and verify the NDA process and technical/testing obligations. Bid Maple is not affiliated with the Government of Canada, and the information above should be checked against the official documents before submitting a proposal.

Immigration and Refugee Board (IRB) - *Canada, Ottawa, Ontario

This appears to be an open Immigration and Refugee Board of Canada (IRB) opportunity for companies or professionals that can design, administer, and assess language tests for interpreter-contractor recruitment. Thework may include three testing components: an official-language written test in English or French, an oral hearing-simulation test involving interpretation between an official language and a target language, and a sight-translation test into English or French. The oral tests may cover up to 60 languages. The requirement indicates that resources must hold Reliability Status security clearance. The proposed contract period is September 30, 2026, to March 31, 2027, with three optional one-year extensions. The estimated volume is approximately 300 tests per year, and the IRB may award multiple contracts based on the languages offered by successful offerors. The tender is listed as closing October 9, 2026, at 2:00 p.m. Ottawa time. The contracting authority is Steve Dessureault, reachable at [email protected] for email inquiries. A business with relevant language-testing, interpretation assessment, or translation-assessment capabilities may find this opportunity potentially relevant, but the tender information alone does not establish eligibility or compliance. Review the complete RFP, amendments, and question-and-answer documents on Canada Buys before deciding whether to bid, and verify the exact closing time, security requirements, evaluation criteria, language requirements, submission instructions, and any mandatory certifications. Bid Maple is not affiliated with the Government of Canada.

Department of Natural Resources (NRCan) - *Ottawa, *Canada, Ottawa, Ontario

NRCan appears to be seeking a high-pressure dual-syringe continuous-flow pump for bench- and pilot-scale research involving pressurized liquids and slurries, with accurate flow and pressure control. The work/equipment would be associated with Ottawa, Ontario.Important restriction: this opportunity is reserved for suppliers already pre-qualified under Supply Arrangement E60PV-19EQUI for laboratory and scientific equipment. The notice specifically refers to suppliers in the “Hydrological instruments” category and “Open stream water level recorders” sub-category. Businesses that are not currently pre-qualified under the required arrangement cannot submit an eligible bid, although they may apply to qualify for the arrangement separately through solicitation E60PV-19EQUI/D. The notice shows an open status and a published closing date of October 12, 2026 at 12:00 p.m.; however, invited suppliers should rely on the solicitation documents for the actual bid deadline and requirements.The tender notice is available here: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105616/npp-nrcan-5000095779_0.pdf This opportunity potentially matches a business that is already approved under the specified Supply Arrangement and can provide the required specialized pump. Carefully verify the official notice, SAP Ariba solicitation documents, eligibility category, specifications, delivery requirements, and closing time before deciding whether to bid.

Department of Agriculture and Agri-Food (AAFC) - *Kentville, *Canada, Montreal, Quebec

Agriculture and Agri-Food Canada (AAFC) is seeking one freeze dryer capable of handling large bulk sample loads, for delivery to the Kentville Research and Development Centre. The listed notice is open and shows a closing date of October 12, 2026 at 2:00 p.m.; however, suppliers invited under the arrangement should rely on the closing date in the actual solicitation documents, not necessarily the public notice. This opportunity appears relevant only to suppliers already pre-qualified under Supply Arrangement E60PV-19EQUI for laboratory and scientific equipment, parts, accessories, services, and supplies. Businesses that do not hold this arrangement cannot submit an evaluated bid for this requirement. The award is expected to go to the responsive bidder that meets all mandatory technical criteria and offers the lowest evaluated aggregate price. The mandatory specifications are provided in Annex A, available through the tender record. The procurement is subject to the Canadian Free Trade Agreement and Canada–Korea Free Trade Agreement. Suppliers interested in future opportunities may review solicitation E60PV-19EQUI/D on Canada Buys (SAP Ariba) to seek qualification for the supply arrangement, but qualification would need to be completed in accordance with the official process. Before deciding whether to pursue this tender, verify the official solicitation, Annex A requirements, delivery details, applicable closing time, pricing instructions, and your current pre-qualified status. Bid Maple is not affiliated with the Government of Canada, and this summary should not replace the official tender documents.

Department of National Defence (DND) - *Nova Scotia *British Columbia, *World, Ottawa, ONT

This appears to be an open Department of National Defence procurement for Victoria-Class submarine spare parts and water-testing kits. The requested items include machine screws, balls, a hand screw jack, socket-head cap screws, and chemical-agent water-testing kits. Delivery is requested to both CFB Esquimalt, British Columbia, and CFB Halifax, Nova Scotia. Quantities are: - Machine screws, NSN 99-7379240: 20 for Esquimalt and 20 for Halifax - Balls, NSN 99-1974309: 2 for each location - Balls, NSN 99-9089319: 2 for each location - Hand screw jack, NSN 20-0064789: 1 for Esquimalt - Socket-head cap screws, NSN 99-7232901: 24 for each location - Chemical-agent water-testing kits, NSN 20-A0W6220: 12 kits for Esquimalt and 15 kits for Halifax The notice identifies specific part numbers and NCAGE codes. Businesses proposing equivalent or substitute products must provide the brand, model or part number, and NCAGE of the product offered. The procurement is subject to Canada’s Controlled Goods Program, so applicable registration, compliance, and handling requirements should be reviewed. The Crown also reserves the right to negotiate with suppliers. Submissions may be made in English or French. The stated closing date is October 13, 2026, at 2:00 p.m. The tender documents provided are the RFP PDF and Annex A spreadsheet on Canada Buys. A business with the relevant supply capabilities may find this potentially relevant, but the information provided does not establish eligibility or qualification. Before preparing a bid, verify the complete official tender notice, specifications, delivery terms, security or Controlled Goods requirements, submission instructions, amendments, and closing time directly in the official documents.

Department of Public Works and Government Services (PSPC) - *Québec, Gatineau, Quebec

## Tender summary **Opportunity:** W7701-268094 – Software development, modelling and simulation **Buyer:** Public Services and Procurement Canada (PSPC), on behalf of Defence Research and Development Canada (DRDC) **Status:** Open **Closing date:** October 15, 2026 at 2:00 p.m. **Location:** Valcartier Research Center, Québec/Gatineau region, Quebec **Category:** Services ### What the work appears to involve DRDC is seeking specialized services for: - Software development - Modelling and simulation - Research and development support - Analysis and evaluation of military systems and capabilities The detailed requirements are expected to be set out in the Statement of Work. The services would support work at or for the Valcartier Research Center. ### Potentially relevant businesses This opportunity appears potentially relevant to Canadian firms with experience in defence-related software engineering, modelling and simulation, scientific or technical research, systems analysis, and evaluation of military technologies or capabilities. The notice provided does not include enough information to determine requirements such as mandatory certifications, security clearances, personnel qualifications, Indigenous or small-business considerations, contract term, pricing format, or submission instructions. ### Next steps Review the official tender notice and all attachments carefully, including the Statement of Work, mandatory requirements, security requirements, evaluation criteria, amendment notices, and bid submission process. Businesses should verify their ability to meet every requirement directly in the official notice before submitting a bid. **Official source:** https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110024428?an Id=ANONYMOUS

Department of Agriculture and Agri-Food (AAFC) - *Kentville, *World, Kentville, NS

Agriculture and Agri-Food Canada (AAFC) is seeking one liquid chromatography (LC) system for its Kentville Research and Development Centre in Kentville, Nova Scotia. The procurement is open and is listed with a closing date of October 19, 2026 at 2:00 p.m.; however, suppliers must confirm the actual solicitation closing time in the tender documents because this notice states that the published date may only indicate the notice-publication period. This opportunity is restricted to suppliers already pre-qualified under Supply Arrangement E60PV-19EQUI for laboratory and scientific equipment, parts, accessories, services and supplies. Suppliers that do not hold this arrangement cannot submit an eligible bid for this requirement. Businesses not currently pre-qualified may apply for the supply arrangement separately by reviewing document E60PV-19EQUI/D on Canada Buys, but that process may not make them eligible for this specific solicitation. The system appears to need advanced proteomics capability, potentially including nano-flow liquid chromatography suitable for coupling with mass spectrometry. Key mandatory requirements include: - Flow rates from at least 200 nL/min to 100 µL/min without a flow splitter; - Maximum operating pressure of at least 15,000 psi; - Operation across pH 2–10; - Two-dimensional LC capability with specified pumps, valves, trapping, switching and nano-Lock spray functions; - Unattended operation and diagnostic monitoring for up to 96 hours; - Solvent storage for up to three eluents; - A micro-binary solvent delivery system with specified precision, conditioning, priming and active-wash functions; - An autosampler supporting 0.1–100 µL injections, multiple injection modes, temperature control from 4–40°C, and 48- or 96-position plates; - A temperature-controlled column chamber; and - Canadian Electrical Code approval and CSA certification upon delivery. The apparent award method is lowest aggregate price among suppliers that meet every mandatory technical criterion. A business considering this opportunity should confirm that it holds E60PV-19EQUI, map its proposed system against every mandatory requirement, and review all bid instructions, delivery terms and the official solicitation before submitting anything. The supplied source is a Canada Buys PDF notice; verify the current official tender record and solicitation documents directly on Canada Buys, as Bid Maple is not affiliated with the Government of Canada.