Parcourez les contrats gouvernementaux canadiens actifs.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

Public Works and Government Services Canada (PSPC) appears to be seeking an advertising and creative-services firm for the “Canada For All” campaign. The work may include media strategy, campaign planning, creative development, and implementation, as described in the Statement of Work.This opportunity is restricted: only suppliers already pre-qualified under Supply Arrangement EN361-230050, Category A, may access the full RFP and submit a bid. The procurement also appears to include initial contracts for live pitch presentations as part of the evaluation process. The tender is listed as open and closes September 24, 2026, at 2:00 p.m. The location is identified as Canada, Gatineau, Quebec. The full solicitation and attachments are available through the applicable SAP Ariba event after logging in and completing a Government of Canada supplier profile. Questions must be submitted through the event messages tab in SAP Ariba, not through the public SAP Business Network Discovery Q&A section or directly by email. This opportunity potentially matches businesses with the required pre-qualification and advertising capabilities. Before proceeding, verify the official SAP Ariba tender notice, eligibility requirements, Statement of Work, submission instructions, and closing time, since no official document link was provided here.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, QC

This appears to be an open Innovative Solutions Canada (ISC) Challenge Stream opportunity sponsored by the Department of National Defence and the Canadian Army. The challenge seeks a domestically produced, rugged uncrewed aircraft system (UAS) for intelligence, surveillance and reconnaissance in Arctic conditions. Key details: - **Opportunity:** MINERVA Initiative – Arctic Uncrewed Air System - **Procurement stage:** Phase 2 prototype development only - **Technology readiness:** Proposed solutions must reportedly fall between TRL 5 and TRL 9 - **Closing date:** September 24, 2026 at 2:00 p.m. Eastern Time - **Location/buyer:** Canada; administered through PSPC, with DND as the challenge sponsor - **Funding mechanism:** Contract - **Submission process:** The notice directs applicants to the ISC challenge webpage and the ISC Call for Proposals 004 for the application and submission rules. The proposed UAS must include an aircraft, sensor payload, ground control station, radio, battery and multi-battery charger, and a remote antenna located approximately 30 metres from the ground control station. The stated minimum operating requirements include: - Operating temperatures from **-40°C to +40°C** - Operation in winds up to approximately **55 km/h** - Operation in specified light rain or snow and moderate icing conditions - At least a **20 km operational radius** - At least **90 minutes of continuous-movement endurance** - Sensors suitable for the required surveillance and reconnaissance missions The description provided is truncated, so additional mandatory technical, domestic-production, testing, security, intellectual-property, proposal-format and evaluation requirements may apply. Amendments 001, 002 and 003 reportedly add questions and answers and instructions concerning attachments; these should be reviewed before preparing an application. This opportunity may be relevant to a Canadian business developing or integrating Arctic-capable UAS technology at the required maturity level, but the available information is not enough to determine whether any particular business or solution meets the requirements. Review the full official challenge notice, Call for Proposals 004, all amendments and the ISC submission webpage before submitting. Confirm the deadline, mandatory criteria and application method directly with the official sources.

Department of Citizenship & Immigration (IRCC) - *Canada, *National Capital Region (NCR), Gatineau, Quebec

IRCC appears to be seeking suppliers for multilingual translation, editing, and review services in non-official languages. The work would support communications products intended for diverse audiences in Canada and internationally, with an emphasis on accuracy, clarity, timely delivery, and cultural appropriateness. The tender is currently listed as open and is associated with IRCC’s Communications Branch. The stated location is Canada-wide, including the National Capital Region and Gatineau, Quebec. The closing date and time are September 25, 2026, at 2:00 p.m. The notice does not provide enough information here to assess a business’s suitability, including the specific languages, required experience, security or administrative requirements, evaluation method, and submission instructions. Potentially interested businesses should review the complete official tender documents before deciding whether to bid. The available documents are the Notice of Proposed Procurement and the Request for Proposals on Canada Buys: - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106370/npp---multilingual-translation-services---english_0.pdf - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106370/cic-160477---rfp---eng_0.pdf All deadlines, requirements, amendments, and submission procedures should be verified in the official tender notice before submitting a bid.

Department of National Defence (DND) - *Northwest Territories *YellowKnife, *YellowKnife, Yellowknife, NT

This appears to be an open Department of National Defence (DND) tender for supplying, delivering, and installing office furniture at the Joe Tobie Building in Yellowknife, Northwest Territories. The work supports expanded Canadian Armed Forces office space on the building’s second and third floors. Key dates: -Tender closing: September 25, 2026 at 2:00 p.m. - All furniture must reportedly be delivered and installed by October 10, 2026. The tender responses state that this deadline is firm. Main requirements include approximately: - 10 U-shaped height-adjustable workstations with file-storage pedestals - 14 L-shaped height-adjustable desks - 10 additional height-adjustable desks of various sizes - 7 flip-top tables plus 3 additional larger flip-top tables - 2 boardroom tables and 1 meeting table for 12 people - 1 reception desk - More than 70 office, guest, executive, and lounge chairs - 28 mobile two-drawer filing cabinets - 22 coat racks, 8 wardrobes, 3 locker banks, 4 bookcases, and several coffee or seated-height tables The contractor would be responsible for sourcing or providing the furniture, coordinating delivery with the DND representative, installing the items in assigned rooms, and replacing defective goods within 14 days. The stated requirements also call for an English-speaking customer-service contact available 24 hours a day, seven days a week; this wording appears unusual for a furniture contract and should be checked against the official solicitation. The tender materials indicate that a height-adjustable main desk with a fixed return or credenza may be acceptable for the U-shaped workstations, provided the overall requirements are met. Other details, including desk orientations and complete specifications, may depend on the attached layout and solicitation documents. A furniture supplier, installer, or delivery contractor with the required inventory and Yellowknife delivery capacity may find this opportunity potentially relevant. Businesses should carefully assess whether they can meet the firm delivery and installation deadline, provide all listed items, coordinate installation in an occupied or controlled government facility if applicable, and satisfy any insurance, security, accessibility, warranty, pricing, and submission requirements in the bid solicitation. Before submitting anything, review the official bid solicitation, Statement of Work, Joe Tobie layout, amendments, and all bidder questions and answers. Confirm the exact closing time, delivery requirements, item specifications, installation obligations, contract terms, and submission method directly in the official tender notice. Bid Maple is not affiliated with the Government of Canada, and this summary does not confirm eligibility or guarantee that a business will qualify or win the contract.

Department of Public Works and Government Services (PSPC) - *Quebec (except NCR) *Ontario (except NCR), Gatineau, Quebec

This appears to be an open Request for Information (RFI) from Public Works and Government Services Canada (PSPC) concerning the modernization of the Joint Deployable Headquarters Signal Regiment (JDHQSRM). An RFI is generally used to gather industry information and does not necessarily represent a call for bids or a contract opportunity. The requirement appears to relate to work in Quebec, excluding the National Capital Region, and Ontario, excluding the National Capital Region, as well as Gatineau, Quebec. The tender record lists the closing date as September 25, 2026, at 2:00 p.m.; confirm the applicable time zone and any amendments in the official notice. The complete RFI package is provided through attachments. Earlier information, up to solicitation amendment 009, is available through the Canada Buys link in the notice. Amendments from 010 onward are expected to be posted through the official Ariba source listed below. Before responding, review the full RFI package, all amendments, response instructions, mandatory requirements, security or technical expectations, and submission process. The information provided here is only a summary and does not establish eligibility or qualification. Verify the official tender notice and current documents at https://discovery.ariba.com/rfx/21076547 and the referenced Canada Buys page before submitting any response.

Defence Construction Canada - Ontario Region - Kingston, Ontario

This appears to be an Advance Procurement Notice from Defence Construction Canada (Ontario Region) for a potential construction project in Kingston, Ontario, not an immediate bid request. The project is for temporary modular workspaces and is estimated at about $20 million. It involves prefabricating, delivering, and assembling five customized modular buildings (about 23,000 sq. ft. total), plus site works such as civil works, servicing, foundations, utility tie-ins, a new access road, and interior fit-out.A few important points: the notice says the solicitation is expected to start later with a Request for Expression of Interest (RFEOI) first, followed by a Tender Phase for those who respond to the RFEOI. DCC also says the project is subject to approval and may not proceed. Security requirements appear to apply, with the anticipated clearance level being Designated Organization Screening (DOS). Contractors that do not already hold the required clearance are being encouraged to start the sponsorship process through DCC’s Industrial Security Program. The notice also mentions there may be an Indigenous business participation component under PSIB. No site visit is offered during the RFEOI stage, but one may be provided later in the Tender Phase. For a Canadian construction business, this potentially matches firms that can handle modular building construction and related site works, and that can manage federal security requirements. You should verify all details directly in the official notice and the DCC security instructions before deciding whether to pursue it or start any sponsorship steps.

Correctional Service of Canada (CSC) - *Canada, *Manitoba, Ottawa, ON

This appears to be an open Advanced Contract Award Notice (ACAN) from the Correctional Service of Canada (CSC) for reintegration and Indigenous community support services. The work is focused on Indigenous offenders—First Nations, Métis and Inuit—and is expected to support workforce entry, release planning, job training, employment readiness, mentorship, cultural programming, counselling, Elder or Knowledge Keeper support, housing and other wrap-around services. Key activities may include identifying offenders needing release support; visiting Stony Mountain Institution in Manitoba; delivering training and cultural teachings; supporting offenders on job sites; providing counselling and case management; offering sweat lodges approximately every seven weeks; and submitting monthly and annual reports to CSC. The services appear to involve both institutional settings and community-based support after release, potentially continuing until an offender’s warrant expiry date. Because this is an ACAN, CSC has identified a pre-selected supplier and may award the contract directly unless another supplier submits a statement of capabilities demonstrating that it can meet the stated requirements. The notice closes September 28, 2026, at 2:00 p.m. The listing references Canada, Manitoba and Ottawa, Ontario, while the described institutional work specifically mentions Stony Mountain Institution; the exact service area and delivery requirements should be confirmed in the official notice. A Canadian organization with relevant Indigenous-led or culturally appropriate reintegration, employment training, counselling, Elder or Knowledge Keeper, and community support capabilities may find this potentially relevant. The notice does not establish that any particular business qualifies. Review the full ACAN and PDF, confirm the statement-of-capabilities requirements, submission method, mandatory experience, security or access requirements, contract terms, and closing time before deciding whether to respond.Official notice: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106453/5393440---acan---final.pdf

Department of Public Works and Government Services (PSPC) - *British Columbia, Gatineau, Quebec

This open tender is for drydocking repairs and refit work on the Canadian Coast Guard ship CCGS Vector. Public Works and Government Services Canada (PSPC), on behalf of the Canadian Coast Guard, expects the contractor to complete the specified “Known Work” in accordance with the technical specifications and Statement of Work. Key dates: -Work start: January 2, 2027 -Work completion: February 27, 2027 -Closing time: September 28, 2026, at 2:00 p.m. - Bidders’conference and vessel site visit: September 10, 2026, at the Institute of Ocean Sciences, 9860 W Saanich Road, Sidney, British Columbia The procurement appears to be limited to suppliers in Western Canada, described as the vessel’s Area of Origin. This could be relevant to Canadian marine repair contractors, shipyards, drydock operators, and firms able to perform the required technical and refit work within the schedule. The tender record lists British Columbia and Gatineau, Quebec, although the vessel, conference, and site visit are in Sidney, B.C.; bidders should confirm the applicable work location and regional eligibility requirements in the official documents. Interested businesses should review the complete Statement of Work, technical specifications, security and insurance requirements, submission instructions, and any mandatory attendance or registration requirements. Attendance at the conference or site visit may be important for preparing a bid, but the official notice should be checked to determine whether it is mandatory. This summary does not confirm that any particular business qualifies. Verify all details, amendments, deadlines, and eligibility conditions in the official tender notice before submitting a bid: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110023805?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be an open request for proposals from Public Services and Procurement Canada (PSPC) for promotional items supporting the Canadian Army during fiscal year 2026–2027. The work may involve supplying branded or promotional products, but the available description does not provide details about the item types, quantities, branding requirements, delivery schedule, evaluation criteria, security requirements, or contract value. The tender is listed for Canada, with Gatineau, Quebec shown as the location. The stated closing date is September 28, 2026, at 2:00 p.m. However, the official notice link and tender documents were not provided, so the deadline, scope, submission method, and eligibility requirements should be confirmed through the official procurement notice before taking any action. A Canadian business that supplies promotional merchandise, printing, branding, or related fulfillment services may find this potentially relevant, subject to reviewing the complete solicitation and its mandatory requirements. This summary does not confirm eligibility or qualification. Verify all details with the official tender notice before preparing or submitting a bid.

Department of National Defence (DND) - *Nova Scotia *British Columbia, *Unspecified, Ottawa, Ontario

This appears to be an open Department of National Defence procurement for transmission-related spare parts and assemblies supporting Halifax-class naval systems. The requirement includes items such as controllable-pitch propellers and shafting, hydraulic-oil control pump units, bearings, thrust blocks, gearing, transmission assemblies, turning gear, shaft brakes, seals, instruments and controls, clutches, and cross-connect gearing. It also references an armoured maintenance vehicle with a remote weapon system. Requested delivery locations appear to be CFB Halifax, Nova Scotia, and CFB Esquimalt, British Columbia. The tender record also lists Ottawa, Ontario and an unspecified location. The stated closing date is September 28, 2026, at 2:00 p.m.; bidders should confirm the applicable time zone and deadline in the official solicitation. Businesses proposing equivalent or substitute products must identify the brand, model and/or part number, and the applicable NCAGE. Required submissions include the Offeror Submission Details in both original Excel and PDF formats, the Offeror Submission Form in PDF, and the Offeror Declaration Form in PDF. Submissions may be made in English or French, and the Crown reserves the right to negotiate. This opportunity appears most relevant to suppliers with specialized marine propulsion, naval transmission, industrial component, or defence maintenance capabilities. The tender does not establish that any particular business qualifies. Review the official RFP, Statement of Requirements and submission annexes carefully—especially specifications, certifications, security or registration requirements, delivery terms, pricing instructions and submission procedures—before deciding whether to bid. Verify all details and the closing deadline in the official tender notice before submitting an offer.

Department of Public Works and Government Services (PSPC) - *Nunavut Territory *Iqaluit, *Nunavut Territory, Edmonton, AB

PSPC is seeking Expressions of Interest (EOIs) from interested Registered Inuit Firms that may be able to provide leased office space in Iqaluit, Nunavut. This is an information-gathering opportunity for a potential future lease, not necessarily a final request for bids. The potential lease would be approximately 10 years, beginning around September 1, 2030, with an early-termination right on or after September 1, 2038, subject to at least 12 months’ written notice. PSPC may also have a three-year extension option. The space requirements appear to include: - Approximately 377 usable square metres of contiguous office space; - Approximately 2.0 square metres of rooftop space; - One energized parking space; - A dedicated telecommunications/equipment room of at least 20.3 square metres, which would be included in rentable-area calculations but not the stated usable-area figure; - Availability approximately 69 weeks before the expected lease start date for preparation and fit-up; - Location in the city of Iqaluit; - Main-floor office or commercial space, preferably with visible storefront exposure, a main-road location, and direct pedestrian access; - Accessibility for persons with disabilities; - Space for bicycle racks; - Cleaning services during business hours; and - Compliance with PSPC’s Standards for Leased Accommodation by the lease commencement date. Industrial buildings or buildings containing industrial space will not be considered. PSPC may inspect proposed premises and may conduct a threat and risk assessment. The stated closing date is September 28, 2026, at 5:00 p.m. The tender record lists Nunavut/Iqaluit and Edmonton, Alberta in its location information, but the description specifically requires the proposed premises to be in Iqaluit. The area units and some translated text appear unclear in the notice, so they should be confirmed. A business with suitable Iqaluit commercial space and the required Registered Inuit Firm status may find this EOI potentially relevant, but the notice does not establish that any particular business qualifies. Review the complete official notice and obtain the referenced accommodation standards and submission instructions before responding.Official document: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/100023/20260706-eoi-ad-en-in-81003425.pdf

Canoe Procurement Group of Canada - Nisku

Request for Proposals Posting expires: Tuesday, September 29, 2026.Location: Nisku To post a bid or tender, please e-mail [email protected].