Parcourez les contrats gouvernementaux canadiens actifs.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

**Tender summary — Commercial-off-the-Shelf E-Learning Content Refresh 2025** Public Works and Government Services Canada (PSPC) appears to be seeking multiple suppliers to provide or refresh commercially available e-learning content for the Canada School of Public Service. This opportunity is for a **Request for Standing Offers (RFSO)**, not an immediate contract. Suppliers selected may receive standing offers that the government could use for future purchases. Being issued a standing offer would not necessarily guarantee any work or minimum volume. - **Status:** Open - **Closing date:** September 1, 2027, at 2:00 p.m. - **Location:** Canada; Gatineau, Quebec - **Potentially relevant businesses:** Organizations that develop, license, adapt, update, or supply commercial e-learning materials may wish to review the requirements. The official documents should be checked to confirm the types of content, technical standards, licensing terms, experience, security, accessibility, and other requirements. - **Questions:** Submit questions through the **Event Messages** tab for the tender event. The notice says not to use the Q&A section on the SAP Business Network Discovery website. - **Registration:** Suppliers must be fully registered with Canada Buys/SAP Ariba to participate. Review the complete official tender notice and all associated documents before deciding whether to bid. Details should be verified directly through the official source: https://discovery.ariba.com/rfx/22495907?extsite=MjI0OTU5MDdfQU4wMTQ4NDA1MDk5Mg== Bid Maple is not affiliated with the Government of Canada, and this summary does not confirm that any business qualifies or that a standing offer will result in awarded work.

Department of Public Works and Government Services (PSPC) - *National Capital Region (NCR), Gatineau, Quebec

This appears to be an RFI-related public sector notice from PSPC in the National Capital Region (Gatineau, Quebec). The notice is for a "Summary of Feedback and Outcomes Report" tied to FINTRAC’s Supervision Modernization Program (SMP). In plain English, it looks like the government is sharing a high-level recap of industry feedback gathered during an earlier RFI, including observations and considerations for the program. Key points: -Buyer: Department of Public Works and Government Services (PSPC) -Location: National Capital Region / Gatineau, Quebec -Category: Services -Status: Open -Closing date shown: 2027-12-31 14:00:00 What it means for a business: - This does not appear to be a typical bid for immediate work; it appears relevant as an information-gathering or market-engagement notice. - Businesses with experience in government consulting, program modernization, supervision/compliance, reporting, or financial-sector public sector work may want to review it. - It may be useful for understanding future procurement direction rather than submitting a direct proposal. Important: - Please verify all details in the official notice before taking any action or responding. - I’m not affiliated with the Government of Canada, and the official portal should be checked for the latest requirements, dates, and submission instructions.

Department of Public Works and Government Services (PSPC) - *National Capital Region (NCR), *Canada, Gatineau, Quebec

This is an open, ongoing Request for Supply Arrangement (RFSA) from Public Services and Procurement Canada (PSPC) for temporary help services in the National Capital Region (NCR). It is a supplier pre-qualification process rather than a single project with a fixed work package. The arrangement covers 14 temporary-help service streams. Suppliers that meet the requirements may be considered for future temporary-help opportunities issued under the arrangement. The notice says there is no limit on the number of supply arrangements that may be awarded, and suppliers may apply for additional classifications or streams each quarter after receiving an arrangement. Service delivery is limited to the NCR, including the Ottawa-Carleton area in Ontario and the Outaouais Regional Community in Quebec. The notice identifies Gatineau, Quebec, and the broader NCR as the location. Applications must be submitted through the Centralized Professional Services System (CPSS), following the RFSA and CPSS instructions. Submissions may be made in either official language. The notice describes quarterly submission and evaluation cycles, although applications may be accepted on an ongoing basis while the permanent notice remains active. The tender record lists a closing date of March 31, 2028 at 2:00 p.m. However, because this is a permanent notice with amendments and periodic evaluation cycles, the current deadline, applicable amendment, stream requirements, security or administrative conditions, and submission instructions should be confirmed in the latest official RFSA documents before preparing an application. This opportunity appears potentially relevant to a Canadian temporary-help or staffing supplier able to provide services in the NCR, but the business should review the complete RFSA, all incorporated documents, and the latest amendment to determine whether it can meet the qualification requirements. Verify all details directly through the official Canada Buys/CPSS materials before submitting.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

**Tender summary: RFSA Flatbed Trailers** Public Services and Procurement Canada (PSPC), on behalf of the Department of National Defence, is seeking suppliers to establish a **Request for Supply Arrangement (RFSA)** for different configurations of flatbed trailers. The trailers must meet the specifications in **Annex A – Purchase Description for Trailer Flatbed**. Suppliers selected for the arrangement may potentially receive future orders, or “call-ups,” from eligible federal departments, agencies, and Crown corporations listed under the Financial Administration Act. - **Status:** Open - **Closing deadline:** **May 26, 2028, at 2:00 p.m. Eastern Time** - **Location:** Canada; PSPC contact location listed as Gatineau, Quebec - **Buyer:** PSPC, for the Department of National Defence - **Category:** Goods and related equipment The notice specifically warns bidders to disregard other response deadlines shown in Ariba Discovery or Canada Buys. Submissions and all required supporting documents must be received by the stated deadline; late bids may be declared non-responsive. This opportunity appears potentially relevant to Canadian businesses that can supply flatbed trailers meeting the required configurations and technical specifications. The information provided does not establish whether a particular company qualifies or can meet all requirements. Review the complete official tender notice, Annex A, submission instructions, and any amendments before deciding whether to bid. **Official source:** https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/16030490?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be an open Government of Canada procurement led by Public Services and Procurement Canada (PSPC). The Common Heavy Equipment Replacement (CHER) project is intended to replace the Canadian Armed Forces’ militarized Heavy Support Equipment with modern, reliable, deployable equipment. This opportunity is for **Bundle 5** of eight planned acquisition bundles. The tender is listed for Canada, with Gatineau, Quebec shown as the location. The notice directs suppliers to SAP Ariba for the completerequirements and submission instructions: http://discovery.ariba.com/rfx/12105802 The stated final submission deadline is **June 15, 2028, at 14:00 Eastern Daylight Time (EDT)**. The amendment specifically says to disregard the response deadline displayed on Ariba Discovery and the Buyandsell posting, and to use the June 15, 2028, 14:00 EDT deadline instead. The available information does not identify the equipment specifications, mandatory qualifications, security requirements, Indigenous or subcontracting requirements, evaluation method, or applicable certifications. A business interested in this opportunity should review the full official tender notice and all SAP Ariba documents, confirm the requirements and amendment history, and ensure its response is submitted through the required channel before the stated deadline. This summary does not determine whether your company qualifies or is suitable to bid.

Department of Fisheries and Oceans (DFO) - *Canada *British Columbia, *British Columbia, Ottawa, Ontario

DFO is seeking firms for a Supply Arrangement to provide South Coast salmon monitoring and biological support services in British Columbia on an as-requested basis. This is not a single guaranteed contract; suppliers accepted into the arrangement may later be invited to compete for specific assignments, with ceiling rates established in advance and possible downward negotiation. The work is divided into four categories: (1) salmon population monitoring and biological support, (2) salmon fishery monitoring and biological support, (3) salmon habitat monitoring and biological support, and (4) population, fishery and habitat analysis. Businesses may be able to submit for one or more categories and zones, subject to the detailed requirements in the RFSA. The three service zones cover areas around Vancouver Island, the Sunshine Coast and mainland inlets. Listed marshalling locations include Victoria, Nanaimo, Powell River, Campbell River, Port Hardy, Port Alberni, Tofino and other South Coast communities.There are two procurement streams: a PSIB Stream for eligible Indigenous businesses, First Nations and related organizations, and a General Stream open to other suppliers, including Indigenous suppliers not submitting under PSIB. The PSIB procurement is set aside under the federal Procurement Strategy for Indigenous Business, while the General Stream is subject to the Canadian Free Trade Agreement. The notice states that there is no security requirement for the Supply Arrangement. The opportunity is described as an ongoing qualification process, meaning new suppliers may be able to apply during the arrangement period. The listed closing date for Solicitation 30004087A is June 30, 2028, at 1:00 p.m. However, the notice says it cancels and supersedes the earlier solicitation 30004087, so businesses should rely on the latest amendment and RFSA documents rather than the older notice. This opportunity appears potentially relevant to firms with salmon monitoring, fisheries or habitat fieldwork, biological research, data analysis, Indigenous business participation, vessels or field logistics in coastal British Columbia. The summary does not establish that any particular business qualifies. Review the official RFSA and all amendments carefully for mandatory experience, personnel, equipment, insurance, reporting, submission procedures, category and zone requirements, and applicable Indigenous-business rules before submitting. The listed DFO contact is [email protected]. Official documents provided include the RFSA and amendments 001, 002 and 003; verify that these are the current versions on the Government of Canada tender system.

Department of Public Works and Government Services (PSPC) - *National Capital Region (NCR), Gatineau, Quebec

This appears to be a Public Works and Government Services Canada (PSPC) information document about the Canadian Intellectual Property Office (CIPO) IT Modernization Phase 3 (ITM3) initiative. It summarizes industry feedback and outcomes from an earlier Request for Information, identified as U8210-256631/A, which reportedly closed on March 26, 2026. The notice lists the National Capital Region, including Gatineau, Quebec, as the location and shows a closing date of June 30, 2028. Based on the information provided, this appears to be an RFI feedback summary rather than a direct request for bids, and no specific work requirements, contract value, qualifications, or submission instructions are included. It may be relevant to Canadian technology and professional-services businesses seeking insight into a potential future CIPO modernization opportunity, but it does not establish that a company qualifies or that bidding is currently available. Review the official notice and linked procurement portal carefully to confirm the document’s status, purpose, timelines, and anyrelated solicitation before taking action: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110016260?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, QC

This appears to be an open Government of Canada Request for Supply Arrangement (RFSA) for Task-based Informatics Professional Services (TBIPS), managed by Public Services and Procurement Canada (PSPC). It is intended to add new suppliers to the TBIPS supply arrangement and allow existing holders to apply for additional tiers, regions, metropolitan areas, streams, or categories. The arrangement may support future federal contracts for informatics professionals across Canada, excluding locations covered by Comprehensive Land Claim Agreements. It is not itself a contract or a guaranteed source of work. Future requirements would generally be competed among pre-qualified TBIPS suppliers, and a contract would exist only if Canada later awards one. Key details: -Closing date: July 4, 2028, at 2:00 p.m. The official notice should be checked to confirm the applicable time zone and whether amendments have changed this date. -Buyer: Public Services and Procurement Canada (PSPC). -Delivery locations: Potentially throughout Canada, subject to the stated exclusions and future requirements. -Scope: Task-based informatics professional services across TBIPS streams and categories. The specific categories, tiers, regions, and evaluation requirements are set out in the RFSA documents. -Submission process: Suppliers must enroll in the CPSS Supplier Module and submit an online response by the deadline. Supporting documents may be requested by email. Suppliers may also need an account in the Government of Canada’s SAP Ariba procurement tool. - Existing TBIPS supply arrangement holders generally only need to respond if they are seeking additional qualifications; their current arrangement is described as remaining active and unchanged. - Indigenous business set-asides may apply to some future requirements. Businesses seeking recognition under the Procurement Strategy for Indigenous Business must complete the relevant CPSS certification and be registered in the Indigenous Business Directory. - Responses and documents may be submitted in English or French. This opportunity may be relevant to Canadian firms that provide the specific informatics services listed in the TBIPS categories and can meet the RFSA’s administrative, technical, experience, registration, and submission requirements. The notice does not establish that any particular business qualifies. Review the complete official RFSA, all amendments, and the CPSS instructions before deciding whether to respond. The supplied document links should be checked forthe current version and amendment history: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/43668/en578-170432-d---rfsa-tbips-dama-spict_amd-modif-001.zip; https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/43668/en578-170432-d---rfsa-tbips_dama-spict_-amd-modif-002.zip; https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/43668/en578-170432-d---rfsa-tbips_dama-spict-2024_0.zip; https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/43668/en578-170432_d---rfsa-tbips_dama-spict_amd-modif-003.zip_1.zip. Questions identified in the notice may be directed to PSPC’s Informatics Methods of Supply team at [email protected].

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

**Tender: Pro Services Method of Supply** Public Works and Government Services Canada (PSPC) is accepting applications for a federal supply arrangement covering professional services, including IT and non-IT services. This is a pre-qualification and procurement framework—not a contract or guarantee of work. Suppliers placed on the arrangement may later be invited to compete for specific government requirements. The arrangement appears intended for professional services valued below the Canada–Korea Free Trade Agreement threshold. The applicable service categories and detailed requirements are set out in the solicitation documents. **Key details** - **Status:** Open - **Closing date:** July 4, 2028, at 2:00 p.m. - **Geographic scope:** Canada, with the notice identifying Gatineau, Quebec - **Languages:** Future services may need to be delivered in English, French, or both, depending on the department’s requirements - **Indigenous business set-asides:** Some future requirements may be reserved under the federal Procurement Strategy for Indigenous Business - **Exclusions:** The solicitation and resulting arrangements exclude locations covered by Comprehensive Land Claims Agreements - **Existing suppliers:** Businesses that already hold a Pro Services supply arrangement generally do not need to submit another bid unless they want to add information or services The supply arrangement is expected to remain in effect until July 4, 2028, unless Canada replaces it, recompetes it, or no longer considers it necessary. It includes recurring quarterly refresh periods, as described in Part 2 of the solicitation. **Recommended next steps** 1. Download and review the most recent solicitation documents and amendments from the Canada Buys notice. The provided links are document archives, and the latest amendment should be checked carefully. 2. Confirm which professional-service categories, mandatory requirements, security or other conditions apply to your business. 3. Set up email notifications on the official notice so you receive future amendments and updates. 4. Direct questions about the opportunity to TPSGC.Pro [email protected]. This opportunity potentially matches Canadian businesses offering eligible professional services, but the tender information provided does not establish whether any particular business qualifies. Verify the current official tender notice, all amendments, submission instructions, and deadlines before preparing or submitting an application.

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be an open Defence Construction Canada (DCC) opportunity to join a Quick Response Tender (QRT) source list for general contractor and multi-trade work at 17 Wing Detachment Dundurn, Saskatchewan. It is not a single construction project or guaranteed contract. DCC may use the source list for future projects estimated at up to $500,000, during a three-year period after the list is established. Interested contractors must apply by email using DCC’s Source List application form. Applications sent by fax or mail will not be accepted. The notice identifies Wilfred Wokekoro as the contact at [email protected]. Although applications may reportedly be submitted at any time subject to the source-list terms, the notice asks applicants to submit as soon as possible and preferably by November 20, 2025. An administrative processing period of approximately 10 days is indicated. A security clearance is not required merely to be added to the source list, but future tenders or contracts may require organizational and personnel security clearances, potentially including DOS, reliability status, or more stringent requirements such as FSC/secret-related clearances. Contractors may also be evaluated against DCC performance standards, and an unacceptable performance rating could result in removal from the list. The tender indicates that the language selected in the application will apply to future tender and contract documents and communications. Documents are available through MERX, where fees may apply.There are apparent data inconsistencies: the listing identifies Edmonton, Alberta and uses an Alberta province code, while the description states that the work location is 17 Wing Detachment Dundurn, Saskatchewan. The listed closing date is January 7, 2029, but the notice also references a preferred submission date in 2025. Confirm the actual service location, application deadline, current source-list status, application form, terms, and any contractor requirements in the official MERX notice before applying.Official source: https://www.merx.com/public/solicitations/3643088760/abstract?language=EN

Defence Construction Canada - Western Region - Edmonton, Alberta

Defence Construction Canada (DCC) is creating a three-year source list of mechanical contractors for quick-response tenders at CFB Edmonton, Alberta. The listed service category is Mechanical (Plumbing & Heating), Project No. ED26SL01. Future projects issued through the list may be valued up to approximately $500,000. A contractor interested in being added must complete the official Source List application form and email it to Brett Cooper at [email protected]. Applications by fax or mail will not be accepted. DCC states that contractors may request to join at any time, subject to the source-list terms, with approximately 10 days needed for administrative processing. The notice also asked interested contractors to apply as soon as possible, preferably by January 6, 2026. The tender record shows a closing date of February 24, 2029 at 4:00 p.m.; confirm how these dates apply in the official notice before relying on them. The language selected in the application will remain the language used for future tender and contract documents and communications under the source list. Although security clearance is not required just to be added, individual future tenders may require organization and personnel security clearances, potentially including DOS, reliability status, or more stringent requirements such as Secret-level FSC and document safeguarding. Contractors may also be evaluated against DCC performance standards, and an unacceptable evaluation could result in removal from the list. The opportunity appears potentially relevant to Canadian businesses providing plumbing and heating services in or able to serve the Edmonton area. This is not a guarantee of eligibility or future work; review the official MERX notice, application form, source-list terms and conditions, and any associated documents carefully before applying. Documents are available through MERX, where fees may apply.Official source: https://www.merx.com/public/solicitations/3743862159/abstract?language=EN

Defence Construction Canada - Western Region - Edmonton, Alberta

Defence Construction Canada (DCC) is accepting applications from electrical contractors who want to be considered for a Quick Response Tender (QRT) source list for work at CFB Edmonton, Alberta. The source list is expected to remain in place for three years after it is established and may be used for future projects valued up to approximately $500,000. This is not a single guaranteed contract. Contractors added to the source list may receive invitations to bid on future electrical projects, subject to the source-list terms and individual tender requirements. Applications must be submitted by email using DCC’s Source List application form to Brett Cooper at [email protected]. Applications by fax or mail will not be accepted. DCC indicates that processing a request may take about 10 days and asked interested contractors to apply as soon as possible, preferably by January 13, 2026. The listed closing date is March 2, 2029, at 4:00 p.m.; however, contractors should confirm whether applications remain open on a rolling basis and verify all dates in the official notice. A security clearance is not required just to join the source list, but future tenders or contracts may require organizational and personnel clearances, potentially including DOS, reliability status, or higher security levels. Contractors will also be subject to performance standards, and poor performance may result in removal from the list. The procurement is for the electrical service category under Project No. ED26SL03 and is subject to the Canadian Free Trade Agreement tendering procedures. Documents and the application form are available through MERX, where fees may apply. This opportunity appears relevant to Canadian electrical contractors able to perform work at or around CFB Edmonton and meet DCC’s source-list requirements. Review the complete official notice, source-list terms and conditions, application form, security requirements, and MERX documents before applying or relying on any deadline.Official source: https://www.merx.com/public/solicitations/3742424221/abstract?language=EN