Contrats gouvernementaux pour laboratoire et essais au Canada.
BidMaple aide les entreprises du secteur Laboratoire et essais à surveiller les avis publics, repérer les correspondances probables et préparer les prochaines étapes à partir de données de sources officielles.
Avis publics actifs
135
Avis de sources publiques actuellement associés à ce profil de services. Les détails finaux doivent être vérifiés dans l’avis officiel.
Types de contrats fréquents
- Services liés au profil
- Travaux et livrables connexes
- Soutien opérationnel
- Approvisionnement spécialisé
- Contrats de service public
- Projets ponctuels ou récurrents
Exigences typiques
- Confirmation d’assurance
- Références de projets pertinents
- Approche technique
- Barème de prix
- Formulaires et certifications requis
Points à surveiller
- Visite de site obligatoire
- Court délai de clôture
- Livraison hors région
- Certification spéciale requise
Exemples actifs
Un échantillon d’avis publics actuels qui mentionnent ce profil de services.
ACTIONNEUR ROTATIF DE PILOTE AUTOMATIQUE
Department of Public Works and Government Services (PSPC)
This tender appears to be for a specific aircraft part: an Actuator Rotary Auto-Pilot for a Bell 412, on behalf of Transport Canada’s Air Services Directorate. It is being issued by PSPC and is open only to holders of a specific supply arrangement (T8493-140035 series), so it potentially matches businesses already qualified under that arrangement or invited suppliers in the aerospace/aviation supply chain. The closing date shown is 2026-09-14 at 2:00 PM, and the location is Ottawa/Gatineau, Quebec. A long list of invited companies is included in the notice. If your business is interested, verify the official tender notice and the supply arrangement requirements carefully before responding, and contact the Supply Arrangement Authority named in the notice for qualification questions.
Caméra hyperspectrale instantanée à champ lumineux à haute résolution
National Research Council of Canada (NRC)
This appears to be an open Request for Proposal from the National Research Council of Canada (NRC) for one high-resolution light-field snapshot hyperspectral camera, specifically the Cubert ULTRIS X20 Plus and Flight Pro package, for research, testing, validation, and operational use. The buyer is NRC, the delivery location is Ontario (Mississauga area), and the closing date is September 14, 2026 at 2:00 PM EST. The notice says offers may be submitted by Canadian suppliers and certain foreign suppliers, subject to the solicitation rules and any sanctions. The selection basis is lowest evaluated price with mandatory technical criteria, so the technical requirements in the tender documents will matter a lot. Deliverables are due by March 31, 2027. Bidders should review the official documents on Canada Buys and verify all mandatory specs, submission instructions, and amendments before bidding.
A.1 Architecte d'applications et de logiciels-Niveau 3
Department of Industry (ISED)
This tender appears relevant to firms that provide senior application/software architecture services, especially Java-based consulting. It is an open procurement from the Department of Industry (ISED) in Ottawa, Ontario, with a closing date of 2026-09-14 at 14:00. The work described is for a Level 3 Application/Software Architect and includes designing and implementing architecture for application systems, translating business needs into solution designs, advising staff and management, producing design and configuration documentation, leading solution design sessions, recommending best practices, and supporting knowledge transfer.In plain English: the buyer is looking for an experienced architect who can help plan, design, document, and present a software solution, likely within an existing government environment. The notice suggests a strong focus on solution architecture, integration, performance, scaling, and stakeholder communication. A Canadian business with consulting experience in Java application architecture, enterprise solution design, and government-facing IT work may want to review this opportunity closely. However, you should verify all requirements, evaluation criteria, and submission instructions in the official tender notice and PDF before deciding whether to bid. The provided document link should be checked directly, since the official notice details are what matter for submission.
Mesureur de dépôts sur tube chauffant DR10 avec tube de référence d’épaisseur de gamme AK210 004 équivalent
Department of National Defence (DND)
The Department of National Defence (DND) appears to be seeking a specialized DR10 Heater Tube Deposit Rater supplied with an AK210-004 range thickness reference tube equivalent. The requested goods are associated with delivery in Gatineau, Quebec, and the tender is currently marked open. Key requirements: - Provide the specified DR10 heater tube deposit rater and AK210-004 equivalent reference tube. - Include a certificate of calibration for each item. The certificate must be dated no more than 90 days before the delivery date. -Requested delivery date: December 15, 2026. -Tender closing date: September 14, 2026 at 2:00 p.m. - The notice states that it is published for 15 calendar days. This opportunity potentially matches businesses that supply specialized measurement, inspection, calibration, or industrial testing equipment. The product specifications, acceptable equivalents, submission instructions, pricing requirements, and any mandatory supplier conditions should be reviewed in the official tender documents before deciding whether to bid. Official documents: - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105502/nicp2026032---po-2026-0402---mtec.pdf - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105502/w8703-270083a_eng_rfp.pdf Please verify the complete official tender notice and documents on Canada Buys before submitting a bid, as dates, requirements, and procurement details may change.
Outil collaboratif de conception et de prototypage d’interfaces
Canada Revenue Agency (CRA)
The Canada Revenue Agency (CRA) is seeking one contractor to provide a cloud-based software-as-a-service interface design and prototyping tool. The tool would support approximately 40 user licences—described in the notice as 30 designer licences and 10 partner licences—with collaboration features such as viewing, commenting and editing without requiring every participant to hold a full licence. The solution would be used for CRA digital content, including intranet, secure portal and Canada.ca pages. The expected contract term is one firm year, with options for up to five additional one-year extensions. The solicitation also includes options to purchase additional licences. The tender is open and is listed for the National Capital Region, Ottawa, Ontario, and potentially worldwide service delivery. The stated closing date is September 14, 2026 at 2:00 p.m.; the official notice should be checked to confirm the applicable time zone and any updated deadline. Only Canadian suppliers and suppliers from applicable reciprocal-trade partner countries appear eligible. Suppliers from non-trading partners will be rejected. Bids must meet all mandatory requirements and evaluation criteria. The responsive bid with the lowest evaluated price is expected to proceed to Proof of Proposal testing, subject to the solicitation rules. Bids must be submitted through Canada Post’s Connect service. The CRA’s bid-receiving email address is used to request a Connect conversation, not to send the proposal directly. Questions are to be sent in writing to [email protected]. This revised solicitation, 1000439295/A, cancels and replaces the earlier version. The notice indicates that previous bidders must submit an entirely new proposal. Changes include removal of two mandatory criteria, a reduction from 80 to 40 firm licences, updated accessibility requirements and a new licence category. A business offering suitable collaborative design/prototyping SaaS may find this opportunity potentially relevant, but this does not establish eligibility or compliance. Review the complete official RFP, all amendments and annexes—particularly the mandatory criteria, security, accessibility, licensing, pricing, Proof of Proposal and submission instructions—before deciding whether to bid. The listed documents are available through the Canada Buys links provided in the tender record.
poste de traitement des produits chimiques par voie humide avec hotte à évacuation
Royal Canadian Mounted Police (RCMP)
The RCMP is seeking proposals for one wet chemical processing station with a vented fume hood, specified as a DFMZ WPB-8R Wet Processing Hood or an equivalent product. The equipment is to be delivered in British Columbia by March 31, 2027. This is an open Request for Proposal under the Canadian Free Trade Agreement. The notice states that bidding is limited to Canadian suppliers, and selection is expected to be based on the lowest-priced compliant proposal. The applicable category is laboratory equipment and supplies, including fume hoods. Proposals are to be submitted by email to [email protected], attention Sherry Chen. The tender notice lists a closing time of September 14, 2026, at 2:00 p.m. Pacific Time, while the tender record shows 5:00 p.m.; this discrepancy should be confirmed in the official solicitation documents before submitting. A business that supplies suitable laboratory or chemical-processing equipment, or an equivalent compliant product, may find this opportunity potentially relevant. Review the full RFP, technical requirements, amendments, delivery conditions, submission instructions, and supplier-integrity provisions carefully. Check the official Canada Buys notice regularly for amendments, as the government states that updates will be posted there and may not be sent directly to bidders. Verify all details with the official tender documents before preparing or submitting a bid.
Comment BidMaple aide les entreprises de laboratoire et essais
Repérer les avis pertinents
Recherchez les données d’appels d’offres publics par services, acheteur, source, lieu et fenêtre de clôture.
Classer la pertinence pratique
Utilisez votre profil, vos zones de service, certifications et exclusions pour prioriser les occasions à examiner.
Suivre le travail de soumission
Sauvegardez les occasions, examinez les listes de vérification et gardez les dates de clôture visibles avant de décider de soumissionner.