Parcourez les contrats gouvernementaux canadiens actifs.

Ministère des Transports et de la Mobilité durable (Direction générale de la gestion contractuelle) - Québec, QC

C02 - Ouvrages de génie civil

Canada Revenue Agency (CRA) - *Canada, *World, Ottawa, Ontario

The Canada Revenue Agency (CRA) is seeking suppliers for its Professional Services Supply Chain (PSSC), covering IT and certain non-IT professional services. Successful contractors would provide consultants on an as-needed basis, mainly to the CRA’s Information Technology Branch in the National Capital Region, although work may come from other CRA branches and locations. Assignments may be remote or in person. The contract period is expected to run from April 1, 2027 to March 31, 2029, with up to three additional one-year extensions. CRA plans to rank responsive bids and award contracts to the five highest-ranked bidders. After that, individual requirements would generally be competed among those contractors. A potentially important requirement is that a bidder must be able to supply consultants for every listed category and level after award. The solicitation also includes security requirements, is limited to Canadian suppliers and bidders from applicable trading partners, and may apply the federal policy on prioritizing Canadian suppliers and Canadian content. The Federal Contractors Program for employment equity applies. Proposal materials must be submitted in English or French. The stated closing deadline is October 16, 2026 at 2:00 p.m. The tender indicates that bids must be submitted through Canada Post’s Connect service. Bidders must first ask CRA to open a Connect conversation using [email protected]; sending the proposal directly to that email address will not be accepted. Questions are to be sent in writing to [email protected]. CRA reports declining historical PSSC spending and warns that professional-services procurement may continue to decrease because of federal spending reductions. This may affect the volume of future work and should be considered when assessing the opportunity. This opportunity appears most relevant to a supplier with broad coverage across all required professional-service categories and levels, the ability to meet federal security and employment-equity obligations, and experience responding to large, competitive government procurements. The information provided does not establish whether any particular business qualifies. Before deciding to bid, review the complete official RFP, financial proposal documents, bidder billable-hours information, and all amendments—especially Amendment 001—and confirm the exact mandatory requirements, security levels, category definitions, evaluation method, forms, pricing rules, and Connect submission procedure. Verify the deadline and all details in the official tender notice before submitting a bid.

Canada Revenue Agency (CRA) - *Canada *British Columbia *Ontario (except NCR) *Saskatchewan *Alberta *Newfoundland and Labrador *Nova Scotia *Prince Edward Island *National Capital Region (NCR) *New Brunswick *Quebec (except NCR) *Manitoba, *Canada, Ottawa, Ontario

## Tender summary The Canada Revenue Agency (CRA) is seeking suppliers to provide parts and labour for its Integrated Security System across CRA locations in Canada. Work may include technical support, programming, installation, servicing, and maintenance on an “as and when requested” basis. The CRA is considering converting up to 51 existing sites from a combination of DSC intrusion detection and Kantech access-control systems to a unified Kantech intrusion/access-control platform. These site numbers are for planning and estimating only and do not guarantee that any particular site will be converted or that a specific volume of work will be ordered. ## Regions Bidders may submit for one or more of the following regions: -National Capital Region: up to 11 potential sites -Ontario: up to 13 -Quebec: up to 1 -Atlantic: up to 4 -Western: up to 22 The CRA expects to evaluate each region separately and may award up to five contracts. A supplier could potentially receive work in one, several, or all regions if it submits a responsive bid and ranks highest for the applicable regions. ## Contract structure - Three firm years - Four optional one-year extensions - Possible additions, removals, or modifications to products and sites - Technical merit and price will both contribute to the evaluation - The Bid Compliance and Remedy Process applies ## Important requirements The solicitation appears to be open only to Canadian suppliers and suppliers covered by an applicable trade agreement, subject to the detailed conditions in the official documents. Security requirements apply, and the Federal Contractors Program for employment equity also applies. Bidders should review the solicitation for mandatory experience, certifications, corporate qualifications, personnel, security-clearance, technical, and regional requirements. Proposals and supporting documents must be submitted in English or French. The notice states that bids must be delivered using the Canada Post Connect service. Suppliers must email the CRA Bid Receiving Unit at `[email protected]` to request that CRA open a Connect conversation; bids should not simply be emailed to that address. Questions are to be sent in writing to `[email protected]`. ## Deadline The tender is listed as closing on **October 19, 2026, at 2:00 p.m.** Confirm the applicable time zone and any submission deadlines in the official solicitation. This version, solicitation **1000536720/B**, cancels and replaces the earlier version ending in `/A`. ## Documents to review -RFP: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106161/1000536720b-security-system-services-rfp.pdf -Financial proposal: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106161/1000536720b-financial-proposal.xlsx This opportunity potentially matches businesses with relevant Kantech/DSC security-system expertise, nationwide or regional service capacity, qualified personnel, and the ability to meet the CRA’s security and bidding procedures. This is not a determination that a particular company qualifies. Verify all mandatory criteria, amendments, security requirements, pricing instructions, and submission procedures in the official tender notice before preparing or submitting a bid.

Ville de Saint-Jérôme. - Saint-Jérôme, QC

C01 - Bâtiments

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be an open Canadian defence-innovation challenge seeking modular wind-powered electricity systems for remote northern DND/CAF locations. The proposed systems would need to produce approximately 25–100 kW, operate reliably in extreme cold, high winds and icing, and be transportable, deployable and maintainable in isolated areas with limited heavy-lift equipment. Designs should also address low and high wind conditions, minimal human intervention, locally serviceable parts and the challenges of permafrost movement and seasonal ground conditions. The opportunity is issued under the IDEaS Call for Proposals 006 and may accept technologies from early research through mature systems (TRL 1–9). Potential funding levels are: - Component 1a (TRL 1–3): up to $250,000 CAD for up to 6 months - Component 1b (TRL 4–5): up to $1.5 million CAD for up to 12 months - Component 2 (TRL 6–9): up to $5 million CAD, with the performance period determined during negotiations Multiple contracts could result, but the stated amounts do not guarantee funding or a contract. The notice closes October 20, 2026, at 2:00 p.m. A proposal is to be submitted through the Defence Innovation Portal after reviewing the challenge and the IDEaS call documents. This may be relevant to Canadian businesses, researchers or technology developers with applicable wind-energy, cold-climate engineering, remote logistics, power-generation or defence capabilities. The available description is truncated, so the full essential outcomes, evaluation criteria, security or contracting requirements and submission instructions should be reviewed carefully. Before submitting anything, verify the current official tender notice and all amendments—particularly the two linked PDFs—and confirm the closing time, eligible applicant requirements, applicable component and portal instructions. Bid Maple is not affiliated with the Government of Canada.

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

**Tender summary:** Defence Construction Canada (DCC) is seeking proposals from design-build teams for the design and construction of the Strategic Tanker Transport Capability (STTC), Main Operating Base–East at 8 Wing Trenton, Ontario. The project’s rough order of magnitude is approximately **$228 million**. - **Status:** Open - **Closing date:** October 20, 2026, at 2:00 p.m. The official MERX system should be checked for the controlling deadline and time zone. - **Location:** 8 Wing Trenton, Ontario. The listing identifies Ottawa as the general location, so bidders should confirm the exact project location in the RFP. - **Procurement method:** Modified design-build; proposals must be submitted through the MERX Electronic Bidding System. - **Trade agreements:** The solicitation refers to the CFTA, CETA Chapter 19, and WTO-GPA. - **Security:** The selected contractor is required to hold a valid **SECRET Facility Security Clearance (FSC)** issued through the Contract Security Program. The detailed requirements are identified in Amendment No. 1 and the solicitation documents. - **Site visit:** A non-mandatory site visit is scheduled for **September 23, 2026, at 11:00 a.m. local time**, at the parking lot at 6 Northstar Drive, Trenton, Ontario. Attendance requirements should be confirmed in the RFP. - **Potential team requirements:** The listed resources include design leadership, architects, cargo-handling and passenger-processing specialists, sustainability professionals, structural, mechanical, electrical, civil/municipal engineers, and BIM specialists. The full RFP may include additional disciplines, experience, licensing, bonding, insurance, security, and submission requirements. This opportunity may be relevant to an experienced Canadian design-build consortium or prime contractor able to assemble the required multidisciplinary team and meet the security and procurement conditions. Smaller firms may potentially participate as specialized subcontractors or consultants, subject to the prime contractor’s team structure and the RFP requirements. Before deciding whether to bid, review the complete official notice, all RFP documents and amendments, security requirements, mandatory submission instructions, and MERX closing details.Official source: https://www.merx.com/public/solicitations/4084822509/abstract?language=EN. DCC advises that questions be sent only to the point of contact named in the advertisement; using another contact could create a disqualification risk.

Defence Construction Canada - National Capital Region - Ottawa, Ontario

This appears to be an Advance Procurement Notice—not a bid solicitation or request for proposals—for a potential design-build contract at CFB Uplands in Ottawa, Ontario. Defence Construction Canada is informing potential Design-Builders about a planned new facility and compound for the Counter Explosive Threat Equipment Management Team (CETEMT). Key details: -Buyer: Defence Construction Canada – National Capital Region -Location: CFB Uplands, Ottawa, Ontario -Project: Design and construction of an approximately 1,650 m² single-storey facility and a roughly 6,500 m² exterior compound -Planned features: Offices, meeting rooms, maintenance garages and workshops, secure storage, a weapons vault, server rooms, washrooms, parking and related support areas - Approximate contract value: $17 million ROM estimate -Contract number: 88076 -APN closing date shown: October 21, 2026 at 2:00 p.m. -Anticipated solicitation posting: Q4 FY26/27, subject to approval by the Department of National Defence -Status: Open, but the project is not guaranteed to proceed Potentially important requirements: - The opportunity is intended for Design-Builders, so relevant design-build capacity and experience may be important. - The project is expected to include security requirements at the FSC Secret level. A Design-Builder would need to hold or obtain the required clearances before contract award; security clearance sponsorship does not guarantee approval or completion within the expected timeframe. - DCC is offering a possible early sponsorship process through its Industrial Security Program. Interested firms without the anticipated clearance should review DCC’s process and reference the APN number, contract number 88076 and requested clearance level when applying. - An Indigenous business participation component is expected under the Procurement Strategy for Indigenous Business (PSIB). The exact participation rules should be confirmed in the eventual solicitation. For a Canadian construction or engineering business, this may be relevant if you can act as, or partner with, a qualified Design-Builder capable of delivering a secure federal defence facility in Ottawa. This notice is mainly an early planning and security-clearance opportunity; it does not invite bids at this stage. Before taking action, verify the complete official notice, all eligibility and security provisions, sponsorship instructions, PSIB requirements, timelines and any future solicitation documents on MERX/DCC’s official source: https://www.merx.com/public/solicitations/4080727218/abstract?language=EN. Do not rely on this summary alone when preparing to pursue or submit a bid.

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be an Advance Procurement Notice, not an active bid request yet. Defence Construction Canada’s Western Region is notifying industry about a potential future project at 4 Wing Cold Lake,Alberta: replacement of the Airfield Lighting Power Centre (ALPC). The estimated value is about $11.1 million, with a possible solicitation anticipated in Fall 2026, but the project is still conditional on DND approval and may not proceed. The work potentially includes civil/site preparation, design and construction of a new prefabricated steel ALPC building, electrical and control systems, airfield lighting cabling, generator and fuel system work, commissioning, and removal of the existing building and related systems. The notice also mentions associated airfield electrical work and compliance with CSA Z463-18.A key point is security: the anticipated requirement is Designated Organization Screening (DOS). Contractors interested in bidding are being encouraged to start the sponsorship/security clearance process early through DCC’s Industrial Security Program. For a Canadian contractor, this appears relevant if your business handles design-build construction, electrical/airfield lighting, industrial buildings, or DND/airport-type infrastructure. However, you should verify the official notice and future solicitation carefully for exact scope, security requirements, bonding, qualifications, and submission rules before taking any action.

Government of the Northwest Territories (GNWT) - *Northwest Territories, Yellowknife, NT

## Tender summary The Government of the Northwest Territories’ Department of Infrastructure is seeking submissions from a contractor for **fuel facility upgrades and capacity increases** in **Sachs Harbour and Ulukhaktok, Northwest Territories**. - **Status:** Open - **Closing date:** October 21, 2026, at 5:00 p.m. - **Category:** Construction - **Buyer:** Government of the Northwest Territories - **Work locations:** Sachs Harbour and Ulukhaktok, NT This opportunity appears relevant to contractors with experience in fuel storage or distribution infrastructure, facility upgrades, construction, and work in remote northern communities. The tender description does not provide enough information to assess project scope, mandatory certifications, bonding, insurance, Indigenous or local participation requirements, or bidding conditions. Tender documents and any addenda should be reviewed through the GNWT contracting portal: https://contracts.fin.gov.nt.ca/ Before submitting, verify the official notice, complete specifications, mandatory requirements, submission instructions, closing time, and any addenda directly with GNWT.

Ville de Mascouche. - Quebec

Part1 - Partenariat

National Research Council of Canada (NRC) - *Ottawa, *Canada, Ottawa, Ontario

**Tender summary — NRC Ottawa Offices Janitorial Services** The National Research Council of Canada (NRC) appears to be seeking a contractor for janitorial and cleaning services at its Ottawa, Ontario offices. The contract scope potentially includes: - Routine and scheduled cleaning - On-demand and emergency cleaning - Specialized cleaning requirements - Waste and recycling support - Labour, supervision, equipment, tools, materials, cleaning products, transportation, reporting, and contract management **Tender status:** Open **Closing date:** October 22, 2026 at 2:00 p.m. **Location:** Ottawa, Ontario **Buyer:** National Research Council of Canada (NRC) Businesses considering this opportunity should review the full request for proposals and all appendices, including the pricing matrix and green-cleaning product requirements. The available documents include the RFP, definitions and statement-of-work materials, appendices, pricing spreadsheet, and a green-cleaning product matrix. This opportunity may be relevant to janitorial service providers that can operate in Ottawa and manage commercial or institutional cleaning requirements. However, the information provided here does not establish whether any particular business meets the tender’s mandatory requirements. Carefully verify the official tender notice, submission instructions, security or insurance requirements, service standards, pricing format, and any certifications or experience requirements before preparing or submitting an offer. The tender documents should be accessed through the official Canada Buys posting and reviewed in full before bidding.

Société québécoise des infrastructures - Québec, QC

C01 - Bâtiments