Browse active Canadian government contracts.

Department of National Defence (DND) - *British Columbia *Nova Scotia, *Unspecified, Ottawa, Ontario

This appears to be an open Department of National Defence opportunity for nonmetallic hose assemblies used by the Canadian military. The tender covers 40 units in total, all identified with manufacturer Danfoss Power Solutions II,LLC: 10 units of part number FB649R0227-0227 (2 for CFB Halifax, Nova Scotia, and 8 for CFB Esquimalt, British Columbia), plus 30 units of part number CA3316MMH0450 (10 for Halifax and 20 for Esquimalt). The applicable GSIN is 4720, and the listed NCAGE is 01276. The closing date is September 18, 2026, at 2:00 p.m. The bid will be evaluated on a Delivery Duty Paid (DDP) basis, and the requirement is subject to a preference for Canadian goods and/or services. Suppliers proposing equivalent or substitute products must provide the brand, model or part number, and NCAGE. Required submissions include the Offeror Submission Details in both Excel and PDF, the Offeror Submission Form, and the Offeror Declaration Form. The solicitation includes multiple amendments, so businesses should review the complete official tender package and every applicable amendment before deciding whether to bid or submitting an offer. This summary does not determine eligibility or compliance.

Shared Services Canada - *Canada, Ottawa, Ontario

Shared Services Canada is seeking suppliers for an Invitation to Qualify (ITQ) under Government of Canada Network Services (GCNS) Stream 4—Optical Network Services (ONS). Businesses that are accepted as “Qualified Respondents” may be invited to participate in future refreshes of the related Request for Supply Arrangement (RFSA). This notice does not yet specify a purchase quantity, contract duration, delivery schedule, or the work to be ordered later. Those details would be established in subsequent solicitations. The closing date is September 18, 2026, at 2:00 p.m. The listed location is Ottawa, Ontario, although the opportunity concerns Government of Canada network services. Bell Canada, Rogers/Shaw Business, Eastlink, and Zayo Canada are identified as already qualified and do not need to respond to this ITQ. This opportunity appears potentially relevant to businesses with suitable optical network services capabilities, but the tender does not establish that any particular company qualifies. Review the two attached solicitation documents carefully— including the amendment, mandatory requirements, submission instructions, security or technical requirements, and deadlines—before deciding whether to bid. Verify all information against the official tender notice and confirm that the documents are current before submitting a response.

Shared Services Canada - *Canada, Ottawa, Ontario

Shared Services Canada has issued an open Invitation to Qualify (ITQ) for GCNS Stream 5 Leased Dark Fibre (LDF). This process appears intended to qualify suppliers that may later participate in refreshes of the Government of Canada Network Services Stream 5 Request for Supply Arrangement (RFSA). It is not currently specifying a purchase quantity, contract duration, or delivery schedule; those details are expected to be established in later solicitations. The listed closing date is September 18, 2026, at 2:00 p.m. The opportunity is associated with Ottawa, Ontario, but may concern services delivered across Canada. Rogers, Zayo Canada Inc., and Videotron are identified as already qualified from an earlier process and do not need to respond to this ITQ. A Canadian telecommunications or network-services provider with relevant leased dark-fibre capabilities may find this opportunity potentially relevant, but the available summary does not establish whether any particular business meets the requirements. Review the complete ITQ and all amendments—particularly Amendment 003 and the linked documents—for mandatory technical, corporate, security, financial, submission, and deadline requirements. Verify the current official tender notice and closing details with Shared Services Canada before preparing or submitting a response.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

PSPC appears to be seeking one enclosed-cabin rigid hull inflatable boat measuring 6.4 to 7.5 metres. The requirement includes engines and a trailer, and the boat must be built to the Technical Statement of Requirement (TSOR). Delivery is to Delta, British Columbia. The procurement is being conducted under Supply Arrangement CW2460392 / E60MC-240001, so suppliers may need to meet the conditions of that arrangement to submit an offer. The tender is listed as open and closes September 18, 2026 at 2:00 p.m. However, the notice requests delivery by March 31, 2026, which is before the stated closing date. This may be an error or may reflect an amended schedule; confirm the dates in the official tender documents before relying on them. This opportunity potentially matches Canadian businesses that can supply and deliver a compliant 6.4–7.5 metre enclosed-cabin RHIB, including engines and trailer. Review the TSOR, Annex B payment and delivery instructions, supply-arrangement requirements, mandatory specifications, security or insurance requirements, and submission procedures. The provided record does not include an official source link or tender documents, so obtain and verify the complete official notice with PSPC before preparing or submitting a bid. Bid Maple is not affiliated with the Government of Canada.

Department of National Defence (DND) - *Canada, *World, Ottawa, Ontario

The Department of National Defence (DND) appears to be seeking multiple Victoria-Class submarine spare parts. The tender is open and closes September 18, 2026 at 2:00 p.m. The requested goods include scupper wands with hoses, nonmetallic shaped sections, several types of O-rings, access covers, an actuating cylinder, and single-stage separators. There are 15 line items in total, with deliveries requested at: - CFB Esquimalt, British Columbia - CFB Halifax, Nova Scotia Quantities vary by item and location. The largest requirement is for O-rings under NSN 99-770-5109—50 units for each location. The tender also includes smaller quantities of parts identified by NSN, part number, and NCAGE. Businesses offering an equivalent or substitute product must identify the brand, model and/or part number, and the applicable NCAGE. For the separator items, the listed part number is for reference only and must be accompanied by a drawing. This may make technical documentation and product traceability important. Tender documents may be submitted in either official language. The Crown states that it may negotiate with suppliers. However, this does not indicate that any particular business will be accepted or selected. Potentially relevant suppliers may include manufacturers, authorized distributors, defence/marine spare-parts suppliers, and businesses able to source and document compliant equivalent products. Before deciding whether to bid, review the complete Request for Proposal, Amendment 001, and the line-items details spreadsheet. Confirm the exact specifications, delivery terms, security or registration requirements, pricing instructions, evaluation method, and submission process in the official tender notice. Verify all information and the closing time on Canada Buys before submitting a bid.

Department of Citizenship & Immigration (IRCC) - *Canada, Québec

This appears to be an open IRCC opportunity for the purchase, delivery, and installation of office furniture at 877 Expo Blvd., Vancouver, British Columbia. The work is expected to be completed by March 31, 2027, and includes workstations, work surfaces, filing and storage products, ancillary products, and collaborative furniture. The tender is being solicited through the PWGSC Supply Arrangement E60PQ-140003/D, General Stream. Suppliers generally need to be pre-qualified Supply Arrangement holders for the relevant product categories to be eligible to bid. A non-Supply Arrangement holder may submit a bid and apply for an arrangement at the same time, but cannot receive the contract unless the arrangement is issued. The government is not required to wait for that evaluation before awarding the contract. There is no security requirement identified in the notice. Bids are due September 18, 2026, at 3:00 p.m. The notice lists the location as Quebec, although the stated delivery and installation site is in Vancouver, B.C.; this discrepancy should be clarified with the contracting authority. Potentially relevant businesses would likely include office furniture manufacturers, authorized dealers, installers, and suppliers able to meet the specified product, delivery, and installation requirements. Interested suppliers should review the complete RFP, drawings, product-builder spreadsheet, and Supply Arrangement conditions, and submit questions to IRCC.Bids [email protected]. To ask about becoming a pre-qualified furniture Supply Arrangement holder, contact [email protected]. This summary does not confirm eligibility or suitability. Verify the current official tender notice, all attachments, deadlines, submission instructions, product specifications, and Supply Arrangement status before submitting a bid.

Department of the Environment (ECCC ) - *National Capital Region (NCR), Dartmouth, Nova Scotia

Environment and Climate Change Canada (ECCC) is seeking on-demand technical support to continuously improve two existing computable general equilibrium (CGE)models: EC-PRO and EC-MSMR. The work appears focused on assessing climate policy impacts and is expected to run for three years from contract award. Key details: -Status: Open -Closing date: September 18, 2026, at 3:00 p.m. -Location: National Capital Region and Dartmouth, Nova Scotia; the notice’s province field is listed as “NO,” so this should be confirmed in the official documents. -Security: No security requirement is identified. -Eligibility: The solicitation is limited to Canadian suppliers and suppliers from applicable trading partners under the Policy on Reciprocal Procurement. Suppliers from non-trading partners may be rejected. -Administrative requirements: Bidders must provide information required under the Integrity Provisions. Additional information may be required from individuals or businesses receiving a pension or lump-sum payment. -Trade agreements: The requirement is covered by several agreements, including the CFTA, CETA, WTO-AGP and CPTPP. -Social procurement: Businesses owned or led by people from under-represented groups are encouraged to bid, although this is not stated as a mandatory condition. -Bid language: Bids may be submitted in English or French. This opportunity potentially matches Canadian firms or partnerships with demonstrated expertise in CGE modelling, climate-economy analysis, model development, technical support and related policy impact assessments. The full Statement of Work, mandatory qualifications, evaluation method, pricing requirements, deliverables and submission instructions should be reviewed carefully before deciding whether to bid. The available tender documents are: - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104613/5000089062r_rfp_en_a002.pdf - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104613/5000089062r_rfp_en.pdf - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104613/5000089062r_rfp_en_a001_0.pdf This summary does not establish that a business qualifies. Verify the official tender notice and all attached documents, including any amendments, with ECCC before preparing or submitting a bid.

Department of National Defence (DND) - *Victoria *Canada, *Victoria, Victoria, British Columbia

The Department of National Defence appears to be seeking one laser engraver and one mechanical engraver for the D85 workshop at CFB Esquimalt in Victoria, British Columbia. The requirement includes delivery, installation, setup, configuration, commissioning, functional testing, accessories, operating manuals, warranty documentation, and at least four hours of online training for up to five Canadian Armed Forces personnel. The equipment must include warranty support covering parts and labour for at least one year. Security requirements apply to the organization and/or personnel, and bidders should review the applicable security clauses and clearance requirements. The procurement also indicates a preference for Canadian goods and/or services, and submissions may be made in English or French. The stated closing date is September 18, 2026, at 5:00 p.m. The Crown may negotiate with suppliers. This opportunity potentially matches businesses that can supply both types of engraving equipment and provide the required installation, training, warranty, and security-related documentation. However, the technical evaluation criteria, security obligations, delivery terms, and submission instructions should be reviewed carefully before deciding whether to bid. Verify all details, amendments, deadlines, and eligibility requirements in the official tender documents before submitting a proposal: - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104862/national-defence_bid-soliciation-w0103-260037_f.pdf - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104862/afr-form.pdf

Government of the Northwest Territories (GNWT) - *Northwest Territories, Hay River, NT

Tender appears relevant to contractors with winter road construction/maintenance experience in the Northwest Territories. It is an open GNWT procurement from Procurement Shared Services on behalf of the Department of Infrastructure for the Sambaa K’e Winter Road, with a closing date of 2026-09-18 17:00:00. Location is listed as Northwest Territories, Hay River, NT, and the category is service procurement (*SRV). The notice indicates documents and any addenda should be reviewed on the GNWT contracts site: https://contracts.fin.gov.nt.ca/. No document links were provided here, so details like scope, mandatory requirements, bonding, insurance, schedule, and submission instructions should be verified directly in the official tender notice before deciding whether to bid.

Department of National Defence (DND) - *Petawawa, *Canada, Ottawa, Ontario

The Department of National Defence appears to be seeking a contractor to provide Skyvan parachute training in or around Petawawa, Ontario. This is an open Request for Proposal under Supply Arrangement #W6399-26AA08, with submissions due by September 18, 2026 at 11:59 p.m. Only existing holders of this Supply Arrangement will receive the RFP directly. Businesses outside the arrangement may need to qualify for it before being invited to bid. Interested suppliers should contact the PSPC Supply Arrangement Contracting Officer for the application and qualification steps. The available notice does not include the detailed work scope, qualifications, security requirements, pricing instructions, or evaluation criteria. The opportunity appears potentially relevant to organizations with parachute-training capabilities, but businesses should not assume eligibility. Verify the complete official tender notice and Supply Arrangement requirements with PSPC before taking action or submitting a proposal.

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be an Advance Procurement Notice from Defence Construction Canada, not a live bid request yet. It is for the design and construction of a new Snow and Ice Control / Heavy Equipment facility at 4 Wing Cold Lake, Alberta, using a modified design-build approach. The work is large-scale, with an estimated value around CAD $110 million, and the planned solicitation is anticipated for September 2026 if it gets approval to proceed. Key points that may matter to a Canadian business owner: -Location: Cold Lake, Alberta -Buyer: Defence Construction Canada, Western Region -Project type: Design and construction of a military support facility -Security: Appears to require active or obtainable SECRET-level facility clearance, and some personnel may need Reliability Status. Security sponsorship may be needed. -Other possible requirements: Net-zero carbon design, DND security standards, IM/IT infrastructure, and controlled airfield access requirements. -Indigenous participation: The notice says the project may include an Indigenous businesses participation component under PSIB.Important caution: this notice says it is not a bid solicitation and there is no guarantee the project will proceed. A business interested in this opportunity should verify the official notice on MERX and review the eventual solicitation documents carefully, especially security, qualification, and participation requirements, before making any bid decisions.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

PSPC is seeking English-to-French spoken-language translation services in the Political Affairs field, Tier 2. The work may involve up to 7,200,000words across two contracts: each contract would cover up to 1,200,000 words in the initial one-year period, with up to two additional option periods of up to 1,200,000 words each. The opportunity is listed as open and is associated with Gatineau, Quebec, with a closing date of September 20, 2026, at 2:00 p.m. However, this is a solicitation under an existing Supply Arrangement. Only suppliers that have already been pre-qualified under that arrangement and formally invited may access the documents and submit an offer. The notice therefore appears potentially relevant mainly to businesses holding the required Supply Arrangement qualification and invitation. No official source or tender documents were provided here. Verify the complete official tender notice, eligibility requirements, invitation status, service standards, security or language requirements, pricing instructions, and closing time before deciding whether to bid or submitting an offer.