Browse active Canadian government contracts.

Defence Construction Canada - Western Region - Edmonton, Alberta

Defence Construction Canada (DCC) is inviting contractors to apply to be placed on QRT source list(s) for work required by the Department of National Defence, at 15 Wing Moose Jaw, Saskatchewan.The source list will be in...

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be an open Government of Canada Request for Supply Arrangements (RFSA) issued by Public Works and Government Services Canada (PSPC) for marine technical services. The goal is to establish or maintain supply arrangements with suppliers that can provide services for one or more vessel types, hull construction materials, and Canadian regions or sub-regions. Potentially relevant work streams include: - Vessel condition surveys, covering multiple categories - Towing assessments - Remediation assessments - Disposal assessments The listed closing date is April 30, 2029, at 2:00 p.m. The tender states that late submissions will not be accepted. The procurement is associated with Gatineau, Quebec, although services may be required in various regions across Canada. Suppliers would need to review the full RFSA and Statement of Requirement (Annex A) to determine the applicable technical, experience, regional, vessel, and submission requirements. Existing suppliers holding an arrangement under EVC01-202002/A, /B, or /C may not need to submit a new arrangement if they do not need changes, according to the notice. No supporting documents were provided here, so the official tender notice should be reviewed carefully for the complete requirements, submission instructions, applicable streams, and any updates before submitting.Official source: https://discovery.ariba.com/rfx/22484536?extsite=MjI0ODQ1Mz ZfQU4wMTQ4NDA1MDk5Mg==

Defence Construction Canada - Western Region - Edmonton, Alberta

Defence Construction Canada (DCC) is inviting contractors to apply to be placed on QRT source list(s) for work required by the Department of National Defence, at 15 Wing Moose Jaw, Saskatchewan. The source list will be i...

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be an open opportunity for underground civil contractors to apply for Defence Construction Canada’s source list supporting work at CFB Edmonton, Alberta. The source list is expected to remain in place for three years after it is established, and DCC may use it for projects valued up to approximately $500,000. Businesses interested in joining must submit the required Source List application form by email to Kelsey Li at [email protected]. Fax and mail applications will not be accepted. Applications may reportedly be submitted at any time, but DCC requested that interested contractors apply as soon as possible, preferably by March 19, 2026. An administrative processing period of about 10 days may apply before an applicant is added to the list. The listed service category is Underground Civil, under Project No. ED26SL02_CN86341. Applicants must select either English or French, and that language will apply to future tender documents, contracts, and communications for the duration of the source list. A security clearance is not required to be added to the source list. However, individual projects may require organizational or personnel security clearances, potentially including Designated Organization Screening, reliability status, or more stringent requirements such as Facility Security Clearance and document safeguarding. Contracts may include measurable performance standards. Contractors receiving an unacceptable or failing performance evaluation may be removed from the source list and may not receive further invitations. Tender and application documents are available through MERX, where fees may apply. This opportunity appears potentially relevant to Canadian contractors that provide underground civil construction services in or around Edmonton and are prepared to meet DCC’s application, performance, language, insurance, safety, bonding, and project-specific requirements. This summary does not confirm eligibility or qualification. Review the official MERX notice and all source-list terms and conditions before applying, and verify the current deadline, required application form, submission instructions, and any applicable security or commercial requirements directly with DCC.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This open opportunity from Public Works and Government Services Canada (PSPC) appears to seek suppliers for Critical Incident Vehicles (CIVs) for the RCMP. The Government intends to create Supply Arrangements—not an immediate purchase contract—with suppliers that meet the technical requirements and can provide all required combinations of cab chassis and specialized vehicle bodies.The listed chassis configurations are: single-axle 4x2, single-axle 4x4, and tandem-axle 6x4. Suppliers may be encouraged to submit an Indigenous Participation Plan at the RFP stage. Once established, the Supply Arrangements would allow Canada to issue future, specific bid solicitations to pre-qualified suppliers; signing an arrangement alone does not guarantee work or create a binding procurement contract. The tender is listed for Canada, with Gatineau, Quebec shown as the location, and is scheduled to close on May 31, 2029, at 2:00 p.m. The requirement potentially matches businesses that can supply the complete range of specified cab chassis and specialized bodies and satisfy the technical, documentation, and other RFP conditions. This summary does not determine eligibility. Review the official tender notice and all related documents for the exact specifications, submission process, mandatory requirements, Indigenous participation provisions, delivery obligations, and anyamendments before deciding whether to bid: https://discovery.ariba.com/rfx/19711090?extsite=MTk3MTEwOTBfQU4wMTQ4NDA1MDk5Mg==

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be a Public Works and Government Services Canada (PSPC) request for supply arrangementscovering three types of access equipment: articulating and telescopic boom lifts, self-propelled vertical mast lifts, and self-propelled scissor lifts. The procurement is identified as WS4157368462 and is described as a continuation of E60HS-18LIFT. A supply arrangement is generally a pre-established purchasing method under which approved suppliers may later receive orders that fit the arrangement’s requirements. The notice suggests that equipment must meet the specifications in Annex A – Purchase Description.Important date issue: the tender record lists a closing date of June 28, 2029, but the description states that all bid documents had to be submitted by June 28, 2024 at 2:00 p.m. EDT, and that late bids would be non-responsive. This inconsistency means the opportunity may already be closed, or the listing may contain outdated or incorrect information. The listed location is Canada, with Gatineau, Quebec shown as the tender location. No supporting documents were provided in the tender data. A business supplying or servicing the specified lift equipment may find the opportunity potentially relevant, but the business should not assume eligibility or that submissions are still being accepted. Verify the current status, deadline, qualification requirements, technical specifications, submission method, and any amendments directly in the official tender notice before taking action: https://discovery.ariba.com/rfx/17246659?extsite=MTcyNDY2NTlfQU4wMTQ4NDA1MDk5Mg==

Department of Fisheries and Oceans (DFO) - *Canada, Ottawa, Ontario

DFO’s Canadian Hydrographic Service is seeking pre-qualified suppliers for on-demand hydrographic and bathymetric services through a Supply Arrangement. The opportunity appears relevant to businesses with expertise in one or more of these areas: (1) hydrographic/bathymetric training, (2) navigational charting support and production, (3) bathymetric data assessment and processing, or (4) hydrographic/bathymetric consulting. The proposed Supply Arrangement would run for five years, ending December 31, 2029. The notice is listed as open until June 30, 2029, at 1:00 p.m. Ottawa time, and new suppliers may be able to submit during refresh periods, including up to six months before expiry. Services would be requested as needed by identified federal users across Canada. Security screening requirements apply. The arrangement generally excludes locations covered by certain Comprehensive Land Claims Agreements in Yukon, the Northwest Territories, Nunavut, Quebec, and Labrador; those requirements would be handled separately. This notice cancels and replaces solicitation 30004518 dated August 29, 2024, and submissions under that earlier version are no longer accepted. Businesses should review the full RFSA documents, including the qualification criteria, applicable service-stream requirements, security provisions, and submission instructions. Verify the current notice and all deadlines on Canada Buys before preparing or submitting a response; this summary does not confirm that any particular business qualifies.

Department of Public Works and Government Services (PSPC) - *Ontario (except NCR), Gatineau, Quebec

**Tender summary — Heavy Construction Equipment Rental (E6TOR-23RM03)** Public Works and Government Services Canada (PSPC) appears to be seeking suppliers that can rent out various types of heavy construction equipment **without operators** to federal departments in Ontario, excluding the National Capital Region. Gatineau, Quebec is also listed in the tender’s location details, so the exact delivery and service areas should be confirmed in the official solicitation documents. This is a **Supply Arrangement** process rather than a single one-time purchase. The arrangement is intended to run from issuance until **June 30, 2029**. Suppliers may submit offers at any time during the solicitation period, and compliant offers are expected to be issued arrangements in the order they are received. Two participation streams are identified: - **Stream 1:** All suppliers - **Stream 2:** Indigenous suppliers under the Procurement Strategy for Indigenous Business The listed closing date and time is **June 30, 2029, at 2:00 p.m.** However, the notice states that offers may be submitted throughout the solicitation period, so bidders should review the official terms for the applicable submission process, equipment categories, technical requirements, insurance, delivery conditions, and Indigenous-business eligibility rules where relevant. This opportunity may be relevant to a Canadian business that rents suitable heavy construction equipment and can serve the specified federal locations. The available information does not establish whether any particular company qualifies. Review the official tender notice and all associated documents before preparing or submitting an offer.Official source: https://discovery.ariba.com/rfx/19982550?extsite=MTk5ODI1NTBfQU4wMTQ4NDA1MDk5Mg==

Department of Public Works and Government Services (PSPC) - *Ontario (except NCR), Gatineau, Quebec

RFSA - Bus Charters and Rentals The purpose of this Request for Supply Arrangement (RFSA) is to initiate a process leading to the selection of bus operators to enter into a Supply Arrangement (SA) with Public Works and G...

Defence Construction Canada - Ontario Region - Kingston, Ontario

This tender appears to be a Defence Construction Canada (DCC) opportunity for general contractors to join a Qualified Contractor/Request-for-Tender (QRT) source list for work at 22 Wing North Bay, Ontario. It is not a one-time project award notice; instead, it is an application process to be added to a source list that DCC may use for future projects estimated between $100,000 and $500,000. The source list is stated to remain in place until August 6, 2029, and DCC is asking interested contractors to submit applications as soon as possible, preferably by August 6, 2026.Key points for a Canadian business owner: the application must be submitted by email using the Source List application form to [email protected], and fax or mail will not be accepted. The notice indicates the language selected in the application will be used for all future tender documents and communications for that source list. While no security clearance is required just to be added to the source list, future projects under it may include organization and personnel security requirements such as DOS, reliability status, or potentially more stringent requirements like FSC/SECRET, so those details should be verified before applying. The buyer is Defence Construction Canada – Ontario Region, the location is Kingston, Ontario, and the work is for Department of National Defence requirements at North Bay. Bidding documents are available on MERX, and fees may apply. A business considering this opportunity should review the official MERX notice and source list terms carefully to confirm the requirements, timing, and any applicable security or performance obligations before submitting an application.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

AMENDMENT TO CLOSING TIME: Please disregard the Ariba Discovery posting response deadline closing time and Buyandsell posting closing time. All required supporting documentation and bid submission must be submitted on Au...

Defence Construction Canada - Western Region - Edmonton, Alberta

**Tender summary — General Contractor Source List, CFB Edmonton** Defence Construction Canada (DCC) is accepting applications from contractors who want to be added to a source list for future Quick Response Tenders at CFB Edmonton, Alberta. The applicable category is **General Contractor (ED26SL05)**. Projects issued through this source list may have an estimated value of up to **$500,000**. The source list is expected to remain in place for **three years after it is established**. Contractors may request to join at any time, but DCC advises submitting applications as soon as possible, preferably by **September 24, 2026**, because processing may take approximately **10 days**. Applications must be submitted by email using DCC’s Source List application form to **[email protected]**. Fax and mail submissions will not be accepted. The application language selected—English or French—will govern future tender and contract communications for the source list. A security clearance is not required just to join the source list. However, future projects may require organizational or personnel security clearances, potentially including DOS, reliability status, or more stringent requirements such as SECRET-level facility clearance and document safeguarding. Contractors will be subject to measurable performance standards. An unacceptable performance evaluation may result in removal from the source list and no further invitations under it. **Closing date shown:** August 26, 2029 at 4:00 p.m. The notice also states that applications may be accepted before that date and that requests to join can be made at any time, subject to the source-list terms. This opportunity appears relevant to Canadian general contractors capable of performing defence-related construction work in the Edmonton area, but the notice alone does not establish whether your business qualifies. Review the official MERX notice, source-list terms and application form carefully, including any insurance, experience, bonding, safety, capacity and security requirements, before applying. MERX fees may apply.Official notice: https://www.merx.com/public/solicitations/4071916173/abstract?language=EN