Lead Hazardous Waste Removal for RCMP Indoor Firing Ranges (IFR), Alberta
Public summary
Generated or condensed from imported source text. Verify before bidding.
This appears to be an open RCMP procurement for hazardous-waste removal and indoor firing-range maintenance at four Alberta locations: Edmonton, Red Deer, Edson and St. Paul. The work includes lead removal and disposal or recycling, bullet-trap maintenance, rubber curtain and pellet work, deep cleaning, HEPA-vacuuming, ventilation pre-filter replacement, and periodic HEPA-filter replacement. The opportunity is restricted to Supply Arrangement holders under EW479-162880 that can perform the services in Alberta. The notice lists 11 invited companies, including Stericycle, Aevitas, Clean Harbors Canada, GFL Environmental, KBL Environmental, Veolia, Miller Environmental and others. A business that is not an invited holder should not assume it can bid on this specific solicitation. The notice says suppliers may apply to the related hazardous-waste Supply Arrangement using RFSA solicitation EW479-162880, but that would be a separate process and would not necessarily make the business eligible for this tender. The contract is intended for one supplier, with an initial one-year term and up to three additional one-year extensions. Personnel require RCMP Facility Access Level 2 with Escort (FA2). The estimated work is spread across all four sites and includes several recurring services, such as bullet-trap checks approximately 10 times per year, lead mining and deep cleaning approximately four times per year, and other repairs or replacements. These quantities are estimates for bid evaluation and are not a guaranteed volume. The stated closing time is October 22, 2026 at 4:00 p.m. The tender data identifies the buyer as the RCMP and lists Saskatchewan/Regina in the location fields, although the described work is in Alberta; this should be checked against the official solicitation. No official source or tender documents were provided here. Before taking action, verify the complete official notice, invitation status, submission instructions, security requirements, insurance, environmental and transportation obligations, pricing format, site conditions, and closing time on Canada Buys or through the contracting authority. Bid Maple is not affiliated with the Government of Canada, and this summary does not confirm that any business qualifies.
Requirement preview
A profile unlocks the full bid checklist and match explanation.
- Appears restricted to Supply Arrangement Holders under EW479-162880 that can perform hazardous waste services in Alberta. Businesses not already holding this arrangement should review the separate RFSA process before pursuing this opportunity.
- The tender indicates that the following invited holders may submit proposals: Stericycle; Aevitas; Clean Harbors Canada Inc. and Affiliated Companies; GFL Environmental Inc.; KBL Environmental Ltd.; Shield Specialize Emergency Services Inc.; Veolia es Canada Services Industriels Inc.; Miller Environmental; SUMAS Environmental Services; Quest Disposal & Recycling; and Environmental 360 Solutions.
- The requirement is for cleaning, removal, packing, disposal and/or recycling of hazardous waste materials from four RCMP indoor firing ranges in Edmonton, Red Deer, Edson and St. Paul, Alberta.
- The work appears to include lead mining of bullet trap systems, rubber pellet depth checks and replenishment, rubber curtain or panel repairs and replacement, deep cleaning, pre-filter replacement, and coordinated HEPA-filter replacement.
Source description preview
Imported source text may contain formatting from the original notice.
This requirement is for the Royal Canadian Mounted Police. This requirement is open only to those Supply Arrangement Holders under EW479-162880 who can perform the services in the geographical location of Alberta. The requirement is intended to result in the award of one (1) contract. The following Supply Arrangement Holders have been invited to submit a proposal: Stericycle Aevitas Clean Harbors Canada Inc. and Affiliated Companies GFL Environmental Inc. KBL Environmental Ltd. Shield Specialize Emergency Services Inc. Veolia es Canada Services Industriels Inc. Miller Environmental SUMAS Environmental Services Quest Disposal & Recycling Environmental 360 Solutions Description of the Requirement: Lead Hazardous Waste Removal for RCMP Indoor Firing Ranges (IFR), Alberta The Royal Canadian Mounted Police (RCMP) K Division, Real Property and Asset Management has a requirement for the cleaning, removal, packing, disposal and/or recycling of hazardous waste materials from four RCMP Indoor Firing ranges located in Edmonton, Red Deer, Edson and St. Paul, Alberta.Level of Security Requirement: Resource Minimum Security Level Required: RCMP Facility Access Level 2 with Escort (FA2)Applicable Trade Agreements: Canada Free Trade Agreement (CFTA), Canada-Korea Free Trade Agreement, Canada-Chile Free Trade Agreement, Canada-Columbia Free Trade Agreement, Canada-Honduras Free Trade Agreement, Canada-Panama Free Trade Agreement, Canada-Peru Free Trade Agreement, Canada-European Union Comprehensive Economic and Trade Agreement (CETA), Canada-United Kingdom Trade Continuity Agreement, Canada-Ukraine Free Trade Agreement, Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP), and World Trade Organization – Agreement on Government Procurement (WTO-AGP)Proposed period of contract: The proposed period of contract shall be for one year from date of contract award inclusive, with the irrevocable option to extend the term of the Contract by up to three additional one year periods under the same conditions.Estimated Level of Effort: The estimated level of effort of the contract, per year and across all 4 locations,will be: 10times per year : Using steel rod, check the depth of rubber pellets from surface of trap to rigid steps of the bullet trap structure or new lead buildup in the middle of trap and its both corners. Add rubber pellets into bullet trap to maintain 600mm (24 inches) depth. Refill the trap hopper with new rubber pellets. Rake rubber pellets to cover rubber membrane at the back of the trap with rubber pellets. Level rubber berm surface to make proper slope. 5times per year: Fix, patch, and/or flip rubber curtains if applicable 4times per year: Replacement of rubber curtains or panels if applicable 4times per year: Lead mining of the bullet trap system 4times per year: Deep cleaning of firing range, range walls 1.8m AFF, training gear (e.g., target holders, First Air kit, etc.), all horizontal surfaces, control and gun cleaning rooms, floors, HEPA vacuum inside filter sections of supply and exhaust units 5times per year: Replacement of pre-filters for exhaust ventilation unit HEPA filters replacement must be coordinated with Project Authority and to be done every 5 years (for Edson, St. Paul, and Red Deer sites), and every 4 years (Edmonton HQ) The estimated level of effort provided is for bid evaluated price determination purposes only. Their inclusion does not represent a commitment by Canada that Canada’s future usage of the services described in the bid solicitation will be consistent with this data.Solicitation Number: M5000-25-2334/AContracting Authority: Sheena Simonson Phone Number: 306-515-1653 E-Mail: [email protected] Any supplier that wishes to submit a request to be a Supply Arrangement Holder for hazardous waste disposal services may do so by responding to the Request for Supply Arrangement (RFSA) with the solicitation number EW479-162880 on https://canadabuys.canada.ca/en/tender-opportunities. The RFSA will remain valid until such time as Public Services and Procurement Canada (PSPC) no longer considers it to be advantageous to use it.
Turn this listing into a bid decision.
Build a company profile to unlock match scoring, explanations, checklist next steps, saved opportunity tracking, and alerts.