Wharf Repairs, Port au Choix, Newfoundland and Labrador
Public summary
Generated or condensed from imported source text. Verify before bidding.
This appears to be an open construction tender from Fisheries and Oceans Canada (DFO) for repairs to wharf Structures 404 and 407 in Port au Choix, Newfoundland and Labrador. The work potentially includes: - Supplying and installing steel wale supports, steel walers, plates, wheelguards, blocking, coping, fenders, ladders and deck resurfacing on Structure 404. - Repairing a hole in pile 10C on Structure 404. - Installing new fenders, ladders, D-bore fenders and a wheelguard on Structure 407. - Painting the existing wheelguard on Structure 407. - Providing all required labour, equipment, materials and other resources. The contractor is expected to complete the work within 16 weeks after contract award. There is no mandatory or optional site visit listed; bidders may inspect the site independently. The tender is shown as closing on September 24, 2026 at 2:00 p.m. The supplied location information identifies Port au Choix, Newfoundland and Labrador, although the province field shows “ON” and the location metadata also mentions Ottawa. This discrepancy should be checked in the official tender documents. Before deciding whether to pursue it, review the full request for quotations, drawings, specifications, bonding or insurance requirements, submission instructions, safety obligations, and any experience or technical requirements. Verify the closing time, applicable time zone, amendments and all other details in the official notice before submitting a bid: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106145/30008405---rfq-en.pdf
Requirement preview
A profile unlocks the full bid checklist and match explanation.
- The work appears to be located at the Port au Choix wharf in Newfoundland and Labrador, at approximately 50.7031° N, 57.3522° W.
- The contractor must furnish all plant, labour, equipment, and materials required for the wharf repairs, in accordance with the specifications, accompanying drawings, and contract terms.
- Work at Structure 404 includes supply, fabrication, and installation of bent plate wale supports, steel walers and associated steel plates, wheelguards, wheelguard blocking, coping, fender systems, ladders, and deck resurfacing.
- A plate repair is required for a hole in pile 10C on Structure 404, as shown on the drawings.
Source description preview
Imported source text may contain formatting from the original notice.
Wharf Repairs, Port au Choix, Newfoundland LOCATION Port au Choix, Newfoundland 50.7031° N, 57.3522° W (50°42'11"N 57°21'08"W) SCOPE OF WORK The work consists of the furnishing of all plant, labour, equipment and material for wharf repairs at Port Au Choix, Newfoundland, in strict accordance with specifications and accompanying drawings and subject to all terms and conditions of the Contract. Work will consist of, but will not necessarily be limited to, the following: • Repairs to Structure 404 consisting of the supply, fabrication, and installation of new bent plate wale supports, steel walers and associated steel plates, wheelguards, wheelguard blocking, coping, fender systems, ladders, and deck resurfacing. • Plate repair for a hole in the pile 10C on Structure 404, as noted on the drawings. • Repairs to Structure 407 involving new fenders, ladders, D-bore fenders and wheelguard. Painting of existing wheelguard is also required. FAMILARIAZATION OF SITE There will be no mandatory or optional site visit. Bidders may access and view the site independently. DELIVERY The Contractor must perform and complete the work under this project within sixteen (18) weeks of contract award.
Turn this listing into a bid decision.
Build a company profile to unlock match scoring, explanations, checklist next steps, saved opportunity tracking, and alerts.