BidMaple
Public contract search

Browse active Canadian government contracts.

Search official-source tender notices before creating an account. BidMaple shows public source facts here and unlocks fit scores, bid checklists, saved pipelines, and alerts after you create a company profile.

1,974
Active listings
639
Closing 7 days
4
Sources

Public facts are open.

Account-specific ranking, match explanations, reminders, and checklist exports stay inside the app.

Construction482 active public listings
Page 32 of 41
FederalConstructionOct 15, 2026ON
Housing Construction Program MDB CFHA RPCIP Bagotville, Montreal & Valcartier

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

This tender appears to be a major Canadian defence-related construction opportunity from Defence Construction Canada (DCC). It is an open request for proposals for design-builder services using a modified design-build approach to design and construct multi-unit residential housing for the Canadian Forces Housing Agency in Quebec. There appear to be three separate contracts tied to three locations: 3 Wing CFB Bagotville, Montreal (Saint-Hubert), and CFB Valcartier. The estimated project values are very large: about $105–$131 million for Bagotville, $88–$109 million for Montreal (Saint-Hubert), and $486–$608 million for Valcartier. The closing date shown is October 15, 2026 at 2:00 PM, but the notice should be verified on MERX and in the official tender documents because dates and details can change. The notice says proposals must be submitted through the MERX Electronic Bidding System, and questions must go only to the listed point of contact. It also references trade agreement rules (CFTA, CETA, WTO-GPA) and DCC’s prompt payment information for contractors. For a Canadian business owner, this appears relevant if your company works in large-scale residential construction, design-build delivery, architecture, engineering, or as part of a qualified prime/design-build team. However, you should verify the official notice and the RFP documents to confirm the exact requirements, scope, bid format, teaming expectations, and any security, licensing, or experience conditions before deciding whether to bid.

ClosingOct 15, 2026
SourceCanadaBuys Tender Notices
StatusOpen
FederalConstructionOct 15, 2026ON
APN - Housing Construction Plan

Defence Construction Canada - National Capital Region - Ottawa, Ontario

**Tender summary — Housing Construction Plan (Advance Procurement Notice)** Defence Construction Canada, for the National Capital Region, has published an advance notice about a planned Canadian Forces housing construction program. This notice is **not a bid solicitation or request for proposals**, and there is no guarantee that the proposed contracts will proceed. The program is expected to use Modified Design-Build contracts combining site studies, architectural and engineering services, detailed design, infrastructure work, and construction. Projects are expected to focus mainly on higher-density, mid-rise apartment housing for Canadian Armed Forces members. **Potentially relevant upcoming locations:** - Wainwright, Cold Lake and Edmonton, Alberta — approximately $608 million combined - Winnipeg and Shilo, Manitoba — approximately $194 million combined - Borden, Kingston, North Bay and Petawawa, Ontario — approximately $1.076 billion combined - Moose Jaw, Saskatchewan — approximately $11 million The notice indicates these potential solicitations may begin in **fall 2026**, subject to Department of National Defence approval. Some locations may be procured separately, while others could be bundled into one Request for Proposals. Earlier RFPs for locations including Ottawa have reportedly already been published. The Government of Canada also expects potential opportunities for Indigenous businesses and communities through subcontracting, employment and training connected with the program. The notice shows a closing date of **October 15, 2026 at 2:00 p.m.**, but because this is an advance notice rather than a bid call, businesses should confirm what that date represents in the official posting. Documents and any future solicitation information are available through MERX, where fees may apply. This opportunity appears most relevant to design-builders, construction companies, architectural and engineering firms, major subcontractors, and businesses able to support large-scale residential construction. Review the official MERX notice and any later RFP documents carefully for mandatory requirements, procurement timelines, project-specific scopes, bonding, security, insurance, Indigenous participation provisions, and submission instructions before deciding whether to pursue it. Bid Maple is not affiliated with the Government of Canada.

ClosingOct 15, 2026
SourceCanadaBuys Tender Notices
StatusOpen
FederalServicesOct 16, 2026ON
Professional Services Supply Chain

Canada Revenue Agency (CRA) - *Canada, *World, Ottawa, Ontario

The Canada Revenue Agency (CRA) is seeking suppliers for its Professional Services Supply Chain (PSSC), covering IT and certain non-IT professional services. Successful contractors would provide consultants on an as-needed basis, mainly to the CRA’s Information Technology Branch in the National Capital Region, although work may come from other CRA branches and locations. Assignments may be remote or in person. The contract period is expected to run from April 1, 2027 to March 31, 2029, with up to three additional one-year extensions. CRA plans to rank responsive bids and award contracts to the five highest-ranked bidders. After that, individual requirements would generally be competed among those contractors. A potentially important requirement is that a bidder must be able to supply consultants for every listed category and level after award. The solicitation also includes security requirements, is limited to Canadian suppliers and bidders from applicable trading partners, and may apply the federal policy on prioritizing Canadian suppliers and Canadian content. The Federal Contractors Program for employment equity applies. Proposal materials must be submitted in English or French. The stated closing deadline is October 16, 2026 at 2:00 p.m. The tender indicates that bids must be submitted through Canada Post’s Connect service. Bidders must first ask CRA to open a Connect conversation using [email protected]; sending the proposal directly to that email address will not be accepted. Questions are to be sent in writing to [email protected]. CRA reports declining historical PSSC spending and warns that professional-services procurement may continue to decrease because of federal spending reductions. This may affect the volume of future work and should be considered when assessing the opportunity. This opportunity appears most relevant to a supplier with broad coverage across all required professional-service categories and levels, the ability to meet federal security and employment-equity obligations, and experience responding to large, competitive government procurements. The information provided does not establish whether any particular business qualifies. Before deciding to bid, review the complete official RFP, financial proposal documents, bidder billable-hours information, and all amendments—especially Amendment 001—and confirm the exact mandatory requirements, security levels, category definitions, evaluation method, forms, pricing rules, and Connect submission procedure. Verify the deadline and all details in the official tender notice before submitting a bid.

ClosingOct 16, 2026
SourceCanadaBuys Tender Notices
StatusOpen
FederalServices and GoodsOct 19, 2026ON
Access Control and Intrusion Detection Services

Canada Revenue Agency (CRA) - *British Columbia *Canada *Ontario (except NCR) *Saskatchewan *Newfoundland and Labrador *Nova Scotia *Prince Edward Island *National Capital Region (NCR) *New Brunswick *Alberta *Quebec (except NCR) *Manitoba, *Canada, Ottawa, Ontario

The Canada Revenue Agency (CRA) is seeking Canadian suppliers to provide parts and labour for its Integrated Security System across CRA locations in Canada. Services may include technical support, programming, installation, repairs, maintenance, and related security-system work on an “as and when requested” basis. The requirement potentially matches businesses experienced with Kantech access-control and intrusion-detection systems, Digital Security Controls (DSC) systems, security-system integration, and ongoing service support. CRA is considering converting up to 51 sites to a unified Kantech platform, but the stated site numbers are for planning only and do not guarantee any work volume. Bidders may submit for one or more of five regions: -National Capital Region: up to 11 potential sites -Ontario: up to 13 -Quebec: up to 1 -Atlantic: up to 4 -Western: up to 22 The CRA expects to award up to five contracts, with each region evaluated separately. The initial term is three firm years, with four possible one-year extensions. The contract may allow CRA to add, remove, or modify products and sites. The listed closing date is October 19, 2026 at 2:00 p.m. The applicable time zone and any submission cut-off details should be confirmed in the official solicitation. Questions are to be sent in writing to [email protected]. Bids must be submitted through Canada Post’s Connect service. The CRA Bid Receiving Unit email ([email protected]) is used to request that CRA open a Connect conversation; bids should not be emailed directly to that address. Proposal materials may be submitted in English or French. Security requirements apply, and the Federal Contractors Program for employment equity applies. The notice also indicates that the procurement is open only to eligible Canadian suppliers and suppliers covered by applicable trade agreements; the complete eligibility rules, mandatory certifications, experience requirements, security clearances, technical criteria, and pricing format must be reviewed in the RFP. The current solicitation, 1000536720/B, replaces an earlier version. Review the official RFP and financial-proposal spreadsheet before deciding whether to prepare a bid.Documents provided with the notice are: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106161/1000536720b-security-system-services-rfp.pdf and https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/106161/1000536720b-financial-proposal.xlsx. This summary does not confirm that any business qualifies; all requirements and submission instructions should be verified against the official tender notice before submitting.

ClosingOct 19, 2026
SourceCanadaBuys Tender Notices
StatusOpen
FederalServicesOct 20, 2026QU
Modular Wind Power for Northern Operations

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be an open Canadian defence-innovation challenge seeking modular wind-powered electricity systems for remote northern DND/CAF locations. The proposed systems would need to produce approximately 25–100 kW, operate reliably in extreme cold, high winds and icing, and be transportable, deployable and maintainable in isolated areas with limited heavy-lift equipment. Designs should also address low and high wind conditions, minimal human intervention, locally serviceable parts and the challenges of permafrost movement and seasonal ground conditions. The opportunity is issued under the IDEaS Call for Proposals 006 and may accept technologies from early research through mature systems (TRL 1–9). Potential funding levels are: - Component 1a (TRL 1–3): up to $250,000 CAD for up to 6 months - Component 1b (TRL 4–5): up to $1.5 million CAD for up to 12 months - Component 2 (TRL 6–9): up to $5 million CAD, with the performance period determined during negotiations Multiple contracts could result, but the stated amounts do not guarantee funding or a contract. The notice closes October 20, 2026, at 2:00 p.m. A proposal is to be submitted through the Defence Innovation Portal after reviewing the challenge and the IDEaS call documents. This may be relevant to Canadian businesses, researchers or technology developers with applicable wind-energy, cold-climate engineering, remote logistics, power-generation or defence capabilities. The available description is truncated, so the full essential outcomes, evaluation criteria, security or contracting requirements and submission instructions should be reviewed carefully. Before submitting anything, verify the current official tender notice and all amendments—particularly the two linked PDFs—and confirm the closing time, eligible applicant requirements, applicable component and portal instructions. Bid Maple is not affiliated with the Government of Canada.

ClosingOct 20, 2026
SourceCanadaBuys Tender Notices
StatusOpen
FederalConstructionOct 20, 2026ON
MDB - STTC MOB-East, 8 Wing Trenton

Defence Construction Canada / Construction de Défense Canada - Ottawa, Ontario

**Tender summary — MDB - STTC MOB-East, 8 Wing Trenton** Defence Construction Canada is seeking proposals from design-build teams for the design and construction of a Strategic Tanker Transport Capability Main Operating Base (MOB-East) at 8 Wing Trenton, Ontario. The project’s rough order of magnitude is approximately **$228 million**, indicating a major defence infrastructure opportunity. - **Status:** Open - **Closing date:** October 20, 2026, at 2:00 p.m. - **Submission method:** MERX Electronic Bidding System - **Contract approach:** Modified design-build - **Applicable trade agreements:** CFTA, CETA Chapter 19, and WTO-GPA - **Security requirement:** The selected contractor must hold a valid **SECRET Facility Security Clearance (FSC)** issued through PSPC’s Contract Security Program. Further requirements are identified in Amendment No. 1. - **Site visit:** Non-mandatory visit scheduled for September 23, 2026, at 11:00 a.m. local time, meeting at 6 Northstar Dr., Trenton, Ontario. The tender appears geared toward a multidisciplinary design-build team. Listed professional roles include design team leadership, architecture, sustainable design, structural, mechanical, electrical, civil/municipal engineering, cargo handling, passenger processing, and building information modelling. The full list of required roles, experience, deliverables, evaluation criteria, insurance, bonding, security, and other conditions must be reviewed in the RFP documents. This opportunity may be relevant to a large general contractor, design-builder, architectural or engineering firm forming a qualified consortium, or specialized firms seeking a subcontracting or teaming role. The security clearance and scale of the project could be significant participation requirements. The provided tender data lists Ottawa as the location, but the project description identifies 8 Wing Trenton; verify the official documents for the precise project location and any eligibility or teaming rules. Questions must be sent only to the official point of contact identified in the solicitation. Review the complete MERX notice, including Amendment No. 1 and all RFP documents, before deciding whether to bid. Confirm all requirements and the final closing time directly in the official tender notice before submitting a proposal. **Official source:** https://www.merx.com/public/solicitations/4084822509/abstract?language=EN

ClosingOct 20, 2026
SourceCanadaBuys Tender Notices
StatusOpen
FederalConstructionOct 21, 2026ON
APN - New Facility and Compound, CFB Uplands

Defence Construction Canada - National Capital Region - Ottawa, Ontario

This is an Advance Procurement Notice (APN), not a bid call or request for proposals. Defence Construction Canada is notifying industry about a potential future design-build contract for a new Counter Explosive Threat Equipment Management Team (CETEMT) facility and compound at CFB Uplands in Ottawa, Ontario. The potential project is estimated at approximately $17 million and would include: - Design and construction of an approximately 1,650 m² single-storey facility; - Offices, workspaces, meeting rooms, maintenance garages and workshops; - Secure storage, a weapons vault, server rooms, washrooms and support areas; and - An exterior compound of approximately 6,500 m², including parking. The anticipated contract number is 88076. The related solicitation is anticipated for posting in Q4 of fiscal year 2026/27, subject to Department of National Defence approval. The APN is currently shown as closing on October 21, 2026 at 2:00 p.m. Eastern Time. The opportunity appears most relevant to a design-builder or a team capable of delivering a secure federal defence construction project. Anticipated industrial security requirements are at the FSC Secret level. Businesses that do not already hold the required clearances may be able to seek sponsorship through DCC’s Industrial Security Program, but sponsorship and clearance approval are not guaranteed and may take time. The project is expected to include an Indigenous businesses participation component under the Procurement Strategy for Indigenous Business (PSIB). This notice does not confirm that the project will proceed, that a solicitation will be issued, or that any company will be eligible to bid. Review the complete official MERX notice and DCC security requirements, including the full sponsorship instructions and eventual solicitation documents, before taking action or submitting any future bid: https://www.merx.com/public/solicitations/4080727218/abstract?language=EN

ClosingOct 21, 2026
SourceCanadaBuys Tender Notices
StatusOpen
FederalConstructionOct 21, 2026AL
APN - REPLACEMENT OF AIRFIELD LIGHTING POWER CENTRE (ALPC)

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be an Advance Procurement Notice, not an active bid request yet. Defence Construction Canada’s Western Region is notifying industry about a potential future project at 4 Wing Cold Lake,Alberta: replacement of the Airfield Lighting Power Centre (ALPC). The estimated value is about $11.1 million, with a possible solicitation anticipated in Fall 2026, but the project is still conditional on DND approval and may not proceed. The work potentially includes civil/site preparation, design and construction of a new prefabricated steel ALPC building, electrical and control systems, airfield lighting cabling, generator and fuel system work, commissioning, and removal of the existing building and related systems. The notice also mentions associated airfield electrical work and compliance with CSA Z463-18.A key point is security: the anticipated requirement is Designated Organization Screening (DOS). Contractors interested in bidding are being encouraged to start the sponsorship/security clearance process early through DCC’s Industrial Security Program. For a Canadian contractor, this appears relevant if your business handles design-build construction, electrical/airfield lighting, industrial buildings, or DND/airport-type infrastructure. However, you should verify the official notice and future solicitation carefully for exact scope, security requirements, bonding, qualifications, and submission rules before taking any action.

ClosingOct 21, 2026
SourceCanadaBuys Tender Notices
StatusOpen
FederalConstructionOct 21, 2026NT
Fuel Facilities Upgrades and Capacity Increase

Government of the Northwest Territories (GNWT) - *Northwest Territories, Yellowknife, NT

## Tender summary The Government of the Northwest Territories’ Department of Infrastructure is seeking submissions from a contractor for **fuel facility upgrades and capacity increases** in **Sachs Harbour and Ulukhaktok, Northwest Territories**. - **Status:** Open - **Closing date:** October 21, 2026, at 5:00 p.m. - **Category:** Construction - **Buyer:** Government of the Northwest Territories - **Work locations:** Sachs Harbour and Ulukhaktok, NT This opportunity appears relevant to contractors with experience in fuel storage or distribution infrastructure, facility upgrades, construction, and work in remote northern communities. The tender description does not provide enough information to assess project scope, mandatory certifications, bonding, insurance, Indigenous or local participation requirements, or bidding conditions. Tender documents and any addenda should be reviewed through the GNWT contracting portal: https://contracts.fin.gov.nt.ca/ Before submitting, verify the official notice, complete specifications, mandatory requirements, submission instructions, closing time, and any addenda directly with GNWT.

ClosingOct 21, 2026
SourceCanadaBuys Tender Notices
StatusOpen