Browse active Canadian government contracts.

National Research Council of Canada (NRC) - *Canada, Ottawa, ON

**Tender: Laboratory Wind Wall System (RFP 26-58018)** - **Buyer:** National Research Council of Canada (NRC) - **Location:** Ottawa, Ontario - **Status:** Open - **Closing deadline:** October 1, 2026 at 2:00 p.m. - **Opportunity type:** Design, fabrication, delivery, and commissioning of a specialized laboratory wind wall system. NRC’s Aerospace Research Centre is seeking a large-scale system for its Drone and Flight Autonomy Laboratory. The system is intended to generate controlled and repeatable airflow, wind, and turbulence conditions for free-flight testing of mid-size unmanned aircraft, including testing in complex environments such as ship airwakes and urban wind fields. This opportunity appears most relevant to businesses with experience in aerodynamic testing infrastructure, large-scale airflow or wind-generation systems, engineering design, fabrication, controls, installation, and commissioning. The technical requirements appear specialized and include defined airflow performance parameters, including ramp-up and ramp-down acceleration and a specified swirl number at the test point. The notice includes multiple amendments and question-and-answer documents, including Amendment #7 and Q&A #6 issued in late August and September 2026. These documents may change or clarify the original requirements, so suppliers should review the latest amendment, all applicable Q&A documents, the complete RFP, specifications, submission instructions, security or site requirements, evaluation criteria, and applicable contract terms before deciding whether to bid. The supplied notice does not include a single official tender-page URL, but the listed Canada Buys PDF documents should be checked directly. A business should not assume it qualifies based on this summary; eligibility, technical capability, mandatory requirements, pricing instructions, and deadline details must be verified in the official tender notice before submitting a proposal.

Department of Public Works and Government Services (PSPC) - *Alberta, Gatineau, Quebec

**Tender summary:** Public Services and Procurement Canada (PSPC) is seeking suppliers for Phase 1 of a two-phase project to replace laboratory cooling equipment at the Canadian Food Inspection Agency (CFIA) Lethbridge Laboratory in Alberta. The work appears to include: - Removing two existing indoor water-cooled chillers, a cooling tower, condenser water pumps, and related piping. - Installing two new outdoor air-cooled chillers on concrete pads. - Installing two remote evaporators inside the mechanical room. - Completing the required electrical, controls, chiller-water piping, and related modifications. **Process:** This is an Invitation to Qualify. In Phase 1, PSPC will assess supplier qualifications. Suppliers that are selected may then be invited in Phase 2 to submit a financial bid based on the project specifications and drawings. A price may therefore not be required at this initial stage. **Closing date:** October 2, 2026 at 2:00 p.m. The tender is currently listed as open. This opportunity potentially matches businesses experienced in commercial or industrial HVAC, chiller replacement, mechanical systems, electrical and controls integration, and related construction work. The listing shows location information for Alberta and Gatineau, Quebec, while the project description identifies the CFIA laboratory in Lethbridge, Alberta; this should be confirmed in the official documents. Review the official tender notice and all attached procurement documents for qualification requirements, mandatory experience, security or bonding requirements, site conditions, submission instructions, and the precise work location before deciding whether to respond or submit anything.Official source: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110024755?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *National Capital Region (NCR), Gatineau, Quebec

This appears to be an open PSPC tender for maintaining perimeter security equipment at Parliament Hill, 111 Wellington Street, Ottawa, in the National Capital Region. The work potentially includes inspecting, testing, repairing, servicing, and updating security bollards, vehicle crash barriers, vehicle traffic arms, and guard booths. The contractor would likely need to provide all required labour, travel, tools, equipment, and materials. Key dates and requirements: -Bid deadline: October 2, 2026, at 2:00 p.m. Late submissions will be considered non-responsive. -Mandatory site visit: September 16, 2026, at 10:00 a.m. -Site visit registration deadline: September 9, 2026, at 11:00 a.m. - Attendees must provide their names and dates of birth when confirming attendance. This opportunity may be relevant to businesses experienced in security equipment maintenance, mechanical or electrical systems, access-control infrastructure, or related public-sector facility services. Because the site visit is mandatory, businesses should carefully review the official tender notice for attendance procedures, technical qualifications, security requirements, insurance, submission instructions, and any amendment to the closing time before deciding whether to bid. Verify all details directly through the official source: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110021120?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This open tender appears to be a Request for Information (RFI) from Public Works and Government Services Canada (PSPC) concerning Space Command and Control. An RFI generally seeks information from industry to help the government understand available capabilities, services, or potential approaches; it may not be a direct contract opportunity or bid solicitation. The notice lists Canada/Gatineau, Quebec as the location and a closing time of October 2, 2026 at 2:00 p.m. No detailed description or supporting documents were provided in the tender data, so the required capabilities, response format, and participation requirements are unclear. It may be relevant to businesses with experience in space-related command-and-control systems or services, but this cannot be determined from the available information. Review the official tender notice and any linked documents for the complete scope, questions process, security or technical requirements, submission instructions, and applicable deadlines before deciding whether to respond.Official source: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110020122?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This open RFI from PSPC in Gatineau, Quebec appears relevant to businesses that work in maritime systems, navigation software, data integration, situational awareness tools, or public-safety technology. The buyer is seeking information for a modernized Vessel Traffic Management System (VTMS) to replace the current VTMIS. Key needs mentioned include rule-based automatic alerts, risk analysis tools, an integrated display of vessel traffic plus waterways conditions (such as geography, ice, and weather), and alignment with e-Navigation plus IMO/IHO standards. The closing date shown is 2026-10-02 at 2:00 PM. As this is an RFI, it is likely for market research rather than an immediate award opportunity, but it may lead to a future procurement. Please verify all details, requirements, and deadlines in the official notice before deciding whether to respond.

Government of the Northwest Territories (GNWT) - *Fort Smith *YellowKnife *Hay River *Northwest Territories *Inuvik, *Northwest Territories, Yellowknife, NT

The Government of the Northwest Territories (GNWT), through Procurement Shared Services and the Department of Health and Social Services, is seeking proposals for the supply and installation of digital medical imaging systems. This opportunity appears relevant to companies that provide medical imaging equipment, installation, commissioning, and potentially related support services. The listed locations include Fort Smith, Yellowknife, Hay River, and Inuvik, Northwest Territories. The tender is currently shown as open and is scheduled to close on October 2, 2026, at 5:00 p.m. The notice lists six addenda, posted between August 10 and September 9, 2026. These addenda may change the requirements, submission instructions, pricing, or deadline. Interested businesses should review the complete tender documents and all addenda through the GNWT procurement portal: https://contracts.fin.gov.nt.ca/. The available information does not include the detailed technical specifications, mandatory requirements, evaluation criteria, insurance or bonding requirements, delivery schedule, or submission process. Verify the official tender notice and the latest addenda directly with GNWT before deciding whether to submit a bid.

Marine Atlantic - North Sydney, Nova Scotia

Marine Atlantic appears to be seeking a shipyard or suitably experienced marine-services supplier for drydocking and refit work on the M.V. Highlanders. The work may include drydocking, vessel inspections, mechanical and electrical maintenance, structural repairs, coating and preservation, safety-equipment servicing, project coordination, shipyard facilities and equipment, labour, and related classification and regulatory certification activities. The vessel is expected to be out of service between April 7 and May 31, 2027, in North Sydney, Nova Scotia. This opportunity may be relevant to businesses with suitable shipyard capacity, marine repair expertise, qualified personnel, equipment, and the ability to complete the work within that period.Important: the tender data shows a closing time of October 5, 2026 at 1:00 p.m., while the description states September 14, 2026 at 2:00 p.m. Atlantic Time. This discrepancy must be confirmed in the official tender documents before preparing or submitting a proposal. The notice states that proposals must be submitted electronically through MERX EBS; email, fax, and other submission methods will not be accepted. MERX fees may apply. Marine Atlantic may accept all or part of a proposal, and the lowest-priced proposal—or any proposal—will not necessarily be accepted. Review the complete official MERX notice, including specifications, mandatory requirements, insurance, certifications, scheduling, pricing instructions, and evaluation criteria. Bid Maple is not affiliated with the Government of Canada or Marine Atlantic, and this summary is not a determination that your business qualifies. Verify all details with the official tender notice before submitting a bid.

Department of Public Works and Government Services (PSPC) - *Alberta, Gatineau, Quebec

**Tender summary:** Public Works and Government Services Canada (PSPC) appears to be seeking offers for the supply, delivery, and assembly of commercial gym equipment, including flooring, for the Department of National Defence. - **Tender:** W168A-26MK06-GYM EQUIPMENT - **Status:** Open - **Closing deadline:** October 5, 2026, at 2:00 p.m. Eastern Daylight Time (EDT) - **Important amendment:** The notice says to disregard any different response deadline shown in Ariba Discovery or on Canada Buys. Submissions received after the stated deadline may be declared non-responsive. - **Location information:** The listing references Alberta and Gatineau, Quebec. The exact delivery and assembly locations should be confirmed in the official tender documents. - **Buyer:** PSPC, on behalf of the Department of National Defence This tender may be relevant to businesses that can provide commercial fitness equipment, suitable flooring, delivery, and on-site assembly. The available information does not include the full specifications, mandatory requirements, evaluation method, certifications, or submission instructions. Review the complete official notice and all amendments before deciding whether to bid, and verify the deadline, locations, scope, and submission process directly through the official source: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110024762?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *Quebec (except NCR), Gatineau, Quebec

This appears to be an open federal request for proposals from Public Services and Procurement Canada (PSPC), on behalf of Defence Research and Development Canada (DRDC), for a laser powder bed fusion (LPBF) metal 3D printer. The requirement includes supplying and delivering the printer to Quebec, along with installation, commissioning, and user training. The listed delivery location is Gatineau, Quebec, with the notice indicating Quebec except the National Capital Region; this should be clarified in the official documents. The tender is scheduled to close on October 5, 2026, at 2:00 p.m. The notice references an Annex Statement of Requirement, but no supporting documents were provided here. Businesses that supply industrial metal additive-manufacturing equipment and related installation or training services may find this opportunity potentially relevant, subject to the detailed technical, commercial, security, and bidding requirements. Review the complete official tender notice and all attachments on the procurement portal before deciding whether to bid. Confirm the exact delivery location, submission instructions, mandatory specifications, contract terms, and applicable deadline time zone.Official source: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110024587?an Id=ANONYMOUS

Department of Public Works and Government Services (PSPC) - *Belleville, Gatineau, Quebec

## Tender summary **Opportunity:** W0125-27TEM2 – Petroleum, Oil and Lubricant Products **Buyer:** Public Works and Government Services Canada (PSPC), for the Department of National Defence **Status:** Open **Closing deadline:** **October 5, 2026, at 2:00 p.m. EDT** **Delivery location:** CFB Trenton, near Belleville, Ontario. The listing also references Gatineau, Quebec, so the official notice should be checked for the exact delivery and administrative locations. ### What is being purchased Canada is seeking offers for the **supply and delivery of various petroleum, oil and lubricant products** on an **“as and when requested”** basis for Canadian Forces Base Trenton. This wording suggests that purchases may be made through orders issued when products are needed rather than through one fixed delivery. The tender details should be reviewed for the specific products, quantities, delivery requirements, contract period, and pricing format. ### Important deadline information - Late submissions will not be accepted. - The tender specifically says to **disregard the Ariba Discovery response deadline**. - Offers must be submitted by **October 5, 2026, at 2:00 p.m. EDT**. ### Potentially relevant businesses This opportunity appears potentially relevant to Canadian suppliers, distributors, or delivery businesses handling petroleum, oil, lubricant, or related industrial products. Depending on the requirements, bidders may need to address product specifications, transportation, storage, safety, environmental, insurance, and regulatory obligations. The listing alone does not establish whether a particular business qualifies or meets all mandatory requirements. Review the complete official tender notice and associated documents before deciding whether to bid. **Official source:** https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110023885?an Id=ANONYMOUS Bid Maple is not affiliated with the Government of Canada. Verify the official notice, submission instructions, amendments, and deadline directly with the buyer before submitting an offer.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be an open Request for Information (RFI) from Public Services and Procurement Canada (PSPC), on behalf of the Department of National Defence (DND), concerning the next version of Training and Capability Development Support Services (TCDSS 2.0). The opportunity includes an RFI and a draft solicitation that may change. PSPC is seeking industry feedback to help define the future requirement, so this notice may not yet be a final procurement or invitation to submit a firm bid. The National Security Exception (NSE) has been invoked, which could affect eligibility, security requirements, access to information, and procurement procedures. Key details: -Buyer: PSPC, for DND -Status: Open -Closing date: October 5, 2026, at 2:00 p.m. -Location: Canada, with the notice identifying Gatineau, Quebec -Submission method: SAP Ariba -Industry Day: Planned virtually for September 9, 2026; further information is expected -Scope: Training and capability development support services, subject to further definition This opportunity potentially matches Canadian businesses with relevant defence, training, capability development, consulting, or related support-service experience, but the notice does not establish that any particular company qualifies. Interested suppliers should review the complete official documents, confirm SAP Ariba registration and submission requirements, assess any applicable security or NSE conditions, and consider participating in the Industry Day. Verify all dates, requirements, amendments, and instructions in the official tender notice before responding or submitting information: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110022769?an Id=ANONYMOUS

VIA Rail Canada Inc. - Montreal, Quebec

VIA Rail Canada Inc. is seeking a marketing media agency for a strategic, integrated media-services partnership. The work appears to include media strategy, planning, buying, audience targeting, campaign optimization, performance measurement, and data-driven reporting across traditional and digital channels. The goal is to strengthen VIA’s brand, improve customer engagement, and support passenger growth. Key stated requirements include: - The supplier must be Canadian or from an applicable trading partner. - The supplier must have a place of business in Canada. - The supplier must be able to deliver all required services in both English and French, including oral communications, presentations, reports, and other documents. - The supplier must have at least 10 years of experience in the media agency industry. The tender is listed as open and is associated with Montreal, Quebec. The stated closing date is October 5, 2026, at 2:00 p.m.; confirm the applicable time zone and any deadline changes in the official notice. Tender documents are available through MERX, and fees may apply. This opportunity may be relevant to an established Canadian media agency with bilingual delivery capabilities and the required industry experience, but the information provided does not establish that any particular business qualifies. Review the complete MERX tender, including all mandatory requirements, evaluation criteria, submission instructions, contract terms, and addenda, before deciding whether to bid.Official source: https://www.merx.com/public/solicitations/4057311208/abstract?language=EN