Browse active Canadian government contracts.

Department of Public Works and Government Services (PSPC) - *Ontario (except NCR), Gatineau, Quebec

PSPC appears to be seeking a supplier to provide and install a Pulse Magnetizer for CanmetMATERIALS, a Natural Resources Canada facility involved in manufacturing rare earth element permanent magnets through its Material Accelerating Platform (MAP). The opportunity is listed as open and has been extended through multiple amendments, with a current closing time shown as September 18, 2026 at 2:00 p.m. The stated delivery/installation area is Ontario excluding the National Capital Region, and Gatineau, Quebec. This opportunity may be relevant to businesses that can supply specialized pulse magnetizing equipment and perform the required installation. The tender notes that late submissions will not be accepted. Several amendments have been issued, including changes to the solicitation and responses to bidder questions, so bidders should review all amendments and the complete official tender documents before preparing a response. The listed official source is the PSPC procurement portal: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110021385?an Id=ANONYMOUS. Verify the final closing date, time zone, technical specifications, mandatory requirements, delivery location, submission process, and all amendment details in the official notice before submitting a bid. This summary does not determine whether a business qualifies.

Department of the Environment (ECCC ) - *National Capital Region (NCR), Dartmouth, Nova Scotia

**Tender summary — Continuous Improvement of Two CGE Models** Environment and Climate Change Canada (ECCC) is seeking on-demand technical support and expertise to continuously improve two established computable general equilibrium (CGE) models: **EC-PRO** and **EC-MSMR**. The contract is expected to run for **three years from the date of award**. This opportunity appears most relevant to businesses or teams with specialized experience in **CGE economic modelling, climate-policy impact analysis, model development, technical research, and related software or data work**. The detailed qualifications, deliverables, evaluation method, pricing requirements, and personnel conditions should be reviewed in the Statement of Work and the full bid solicitation. **Key details:** - **Buyer:** Environment and Climate Change Canada - **Status:** Open - **Closing date:** September 18, 2026, at 3:00 p.m. - **Service locations:** National Capital Region and Dartmouth, Nova Scotia, according to the notice - **Security clearance:** No security requirement is identified - **Contract term:** Three years from contract award - **Bid language:** English or French - **Eligibility:** The notice states that Canadian suppliers and suppliers from applicable trading partners may submit offers; suppliers from non-trading partners may be rejected under the Policy on Reciprocal Procurement. - **Trade agreements:** The requirement is subject to several agreements, including the CFTA, CETA, WTO-AGP, CPTPP, and other listed agreements. - **Social procurement:** Businesses owned or led by Canadians from under-represented groups are encouraged to bid, although this is not stated as a mandatory condition. Bidders must also comply with the applicable integrity provisions and provide any required information concerning pensions or lump-sum payments. A debriefing may be requested within 15 working days after receiving the solicitation results. Before deciding whether to bid, review the official solicitation documents—particularly the Statement of Work, mandatory technical criteria, bidder instructions, evaluation criteria, submission format, and contracting authority details. The notice information provided here does not establish that any particular business qualifies, so all requirements and deadlines should be verified in the official tender notice before submitting an offer.

Department of National Defence (DND) - *Victoria *Canada, *Victoria, Victoria, British Columbia

This appears to be an open Department of National Defence opportunity for supplying one laser engraver and one mechanical engraver to the D85 workshop at CFB Esquimalt in Victoria, British Columbia. The closing date is September 18, 2026, at 5:00 p.m. The contract would potentially include: - Delivery of both engraving machines - Installation, setup, configuration, and commissioning at the workshop - Functional testing after installation - All required accessories, operating manuals, and warranty documents - At least four hours of online training for up to five Canadian Armed Forces personnel, covering operation, maintenance, and software - At least one year of warranty support for parts and labour There are security requirements associated with this procurement. Businesses should review the solicitation’s sections on security requirements, security clearances, and security documentation to determine what screening may be required for the organization and its personnel. The notice also indicates a preference for Canadian goods and/or services, allows submissions in either official language, and states that the Crown may negotiate with suppliers. The technical evaluation criteria, commercial terms, submission instructions, and complete security requirements should be reviewed in the official documents before deciding whether to bid. The listed documents are available through the Canada Buys links provided with the tender, including the bid solicitation and tender notice form. This summary does not determine whether a business qualifies; verify all requirements, deadlines, and amendments in the official tender notice before submitting a bid.

National Research Council of Canada (NRC) - *Canada, Mississauga, Ontario

The National Research Council of Canada (NRC) is seeking one complete ground-based detect-and-avoid (DAA) radar system to support Beyond Visual Line of Sight (BVLOS) operations for remotely piloted aircraft systems. The requested system is identified as the Sparrowhawk DAA radar and appears to include the radar unit, processing unit, laptop, ADS-B receiver, cabling, airspace-management software, remote customer support, software updates, custom transport cases, a tripod, and manufacturer-provided mobile training. The work or delivery location is listed as Mississauga, Ontario. The tender is currently marked open and is scheduled to close on September 21, 2026, at 2:00 p.m. The opportunity appears most relevant to the manufacturer, authorized distributor, or a supplier able to provide the specified integrated radar system and related training and support. This does not establish that any particular business qualifies. Review the official tender notice for the procurement method, mandatory specifications, supplier eligibility, delivery requirements, security or technical conditions, pricing instructions, and submission process before deciding whether to bid.The available notice is: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105595/26-58129_acan_detect-and-avoid-radar_eng.pdf. Bid Maple is not affiliated with the Government of Canada.

Department of Public Works and Government Services (PSPC) - *Ontario (except NCR), Gatineau, Quebec

**Tender: Electromagnet (23584-270141)** Public Works and Government Services Canada (PSPC) is seeking an electromagnet for CanmetMATERIALS at Natural Resources Canada. The equipment is intended for scientific research, including applying magnetic fields to materials during experiments and post-processing. It must have an adjustable gap to accommodate different sample sizes and testing needs. - **Status:** Open - **Closing date:** September 21, 2026, at 2:00 p.m. The time zone is not specified in the supplied information, so confirm it in the official notice. - **Delivery/location information:** Ontario, excluding the National Capital Region, and Gatineau, Quebec. Confirm the exact delivery requirements and applicable location in the solicitation documents. - **Amendments:** Amendment 001 responds to bidder questions. Amendment 002 extends the posting deadline to September 21, 2026. - **Late bids:** Late submissions will not be considered or accepted. This opportunity appears potentially relevant to Canadian suppliers of electromagnets, laboratory equipment, or specialized scientific research equipment. The available information does not include the complete technical specifications, evaluation criteria, submission instructions, or contracting terms, and no supporting documents were provided here. Review the official tender notice and all amendments before deciding whether to bid. Confirm the required electromagnet specifications, delivery location, closing time and time zone, mandatory forms, and electronic submission process.Official source: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110022905?an Id=ANONYMOUS

Department of Industry (ISED) - *National Capital Region (NCR) *Canada, *National Capital Region (NCR), Ottawa, Ontario

ISED is seeking an independent contractor to provide software-based verification services for the upcoming 26 GHz and 38 GHz spectrum auction (the mm Wave auction).The contractor would be expected to: develop software that reflects the auction rules; test and validate the Power Auctions software before the auction; verify the final allocation and prices; investigate any discrepancies; and help identify and implement solutions with ISED. The opportunity is listed as open and is associated with the National Capital Region, Ottawa, Ontario. The stated closing time is September 21, 2026 at 2:00 p.m. The tender appears potentially relevant to businesses with experience in auction-rule implementation, independent software testing, complex allocation or pricing algorithms, and related technical support. The notice identifies Davis Opie as the temporary contact for solicitation questions submitted up to August 31, 2026. Questions after that date should be sent to the Contracting Authority named in the solicitation documents. This summary does not confirm that any business qualifies or that it can meet the tender’s mandatory requirements. Review the official RFP and notice carefully for eligibility conditions, technical specifications, security or personnel requirements, deliverables, evaluation criteria, contract terms, and bid-submission instructions. Verify the closing date and all requirements in the official documents before submitting a bid.Documents provided: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104708/rfp-ised216810.pdf and https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104708/ised216810---npp.pdf

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Québec

This appears to be an Innovative Solutions Canada (ISC) Challenge Stream opportunity sponsored by the Department of National Defence (DND), with PSPC shown as the contracting department. The initiative seeks a domestically produced uncrewed ground system (UGS) for moving cargo and munitions in difficult and potentially dangerous battlefield environments. The opportunity is open only for ISC Phase 2 prototype development. Proposed technologies should reportedly be at Technology Readiness Level (TRL) 5 to 9. Funding is identified as being provided through a contract. The proposed system must include, at minimum: - An uncrewed ground vehicle with onboard electronics, propulsion and payload capability - Navigation and mission sensors - A ground control station for the operator - A radio link between the vehicle and control station - Batteries and a charger capable of charging multiple batteries simultaneously - A remote antenna located 100 metres from the ground control station The excerpt also identifies these mandatory performance requirements: - Operation from -20°C to +40°C - Maximum unladen weight of 410 kg - Minimum unladen operating radius of 5 km from the ground control station The full notice may contain additional mandatory requirements, evaluation criteria, technical specifications, submission instructions and security or contracting conditions. The supplied description is truncated, so those details cannot be confirmed here. Key dates: -Opening: August 24, 2026 at 10:30 a.m. Eastern time, according to the notice -Closing: September 21, 2026 at 2:00 p.m. Eastern time -Location listed: Gatineau, Quebec / Canada This opportunity potentially matches Canadian businesses developing rugged autonomous vehicles, robotics, defence technology, navigation systems, remote-control systems, communications equipment or related subsystems. However, businesses should not rely on this summary to determine eligibility or compliance. Review the complete official challenge notice, ISC Call for Proposals 004, Amendment 001 and all attachments before preparing or submitting a proposal. Verify the current requirements and submission process through the official Canada Buys and ISC sources.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Québec

This appears to be an open Innovative Solutions Canada (ISC) Challenge Stream opportunity sponsored by the Department of National Defence and administered through PSPC. The challenge seeks a domestically produced, rugged and easy-to-use uncrewed aircraft system (UAS) for short-range intelligence, surveillance and reconnaissance (ISR) by Canadian Army personnel. Key details: -Title: MINERVA Initiative – Intelligence, Surveillance and Reconnaissance Uncrewed Air System -Status: Open -Opening date: August 24, 2026 -Closing date: September 21, 2026 at 2:00 p.m. Eastern Time -Location listed: Gatineau, Quebec / Canada -Funding mechanism: Contract -Stream: ISC Challenge Stream, Phase 2 prototype development only -Technology readiness level: Proposed solutions must reportedly fall within TRL 5 to 9 The requested system appears to need an air vehicle, sensor payload, ground control station, radio, batteries and multi-battery charger, and a remote antenna positioned 100 metres from the ground control station. Mandatory operating requirements described in the notice include operation from -20°C to +40°C, wind speeds up to 40 km/h, and light rain or snow. The system must also have at least a 6 km operational radius and 60 minutes of continuous-movement endurance. The supplied description is truncated, so additional technical requirements may apply, including further sensor, communications, safety, maintenance, testing, and integration requirements. This opportunity may be relevant to Canadian businesses developing or manufacturing UAS platforms, ISR sensors, flight-control or communications systems, ruggedized electronics, or integrated defence technology, particularly those with a prototype at the required readiness level. However, the notice does not provide enough information to determine whether a particular company or solution is eligible or suitable. The notice refers applicants to ISC Call for Proposals 004 and directs proposals to the ISC challenge webpage rather than providing a conventional bid-submission process in the tender listing. Amendment 001 reportedly adds an attachment and provides details about including an attachment. Before preparing a submission, review the complete official challenge page, Call for Proposals 004, amendment attachment, eligibility rules, submission instructions, intellectual-property and security requirements, evaluation criteria, and all technical requirements. Confirm the applicable time zone and deadline directly in the official notice, as well as whether any additional documents or certifications are required. Bid Maple is not affiliated with the Government of Canada, and this summary should not replace verification of the official tender documents.

National Research Council of Canada (NRC) - *Canada, *Ottawa, Montreal, Quebec

The National Research Council of Canada (NRC) appears to be seeking a high-precision gas-burning-velocity tester system. The equipment would be used to measure laminar flame propagation in flammable gas mixtures, including gases released during battery thermal runaway events. This opportunity may be relevant to suppliers of combustion-testing equipment, flame-analysis systems, laboratory instrumentation, or related integration and support services. The tender indicates that all deliverables must be provided within five months after contract award.Status: Open Closing date: September 21, 2026 at 2:00 p.m. — confirm the applicable time zone and submission method in the official notice.Buyer: National Research Council of Canada (NRC) Potential delivery or performance locations: Canada, including Ottawa and Montreal, Quebec. Review the complete request for proposal, question-and-answer document, Amendment 02, and notice of proposed procurement before deciding whether to submit an offer. These documents may contain mandatory technical specifications, testing requirements, certifications, pricing instructions, security or delivery conditions, and amendments that affect the bid. Bid Maple is not affiliated with the Government of Canada, and the information provided here is only a plain-English summary. Verify all details on the official Canada Buys tender documents before submitting a bid.

Department of National Defence (DND) - *Canada, Ottawa, Ontario

The Department of National Defence (DND) appears to be seeking a supplier for ten Mobile Treatment Centre (MTC) cap-style slide-in modules for Canadian Forces Health Services. The modules would be installed on government-owned 2024 Dodge RAM 3500 trucks and support medical treatment, casualty extraction and transportation, training, routine operations, and domestic response activities across Canada. The initial firm requirement is for two MTC units, with options for up to eight additional units during the contract period. The work includes supplying, delivering, installing, testing, commissioning, documenting, training users, and providing warranty support. Equipment may include medical treatment areas, electrical and environmental systems, emergency warning equipment, installation harnesses, and related components and services. The anticipated contract would run from award until March 31, 2028. Delivery and installation locations are identified in Appendix 1 to the Statement of Requirements. Proposals will be evaluated based on the solicitation’s technical and pricing criteria, with the award intended for the responsive offer receiving the highest combined rating. The procurement is subject to the Interim Policy on Reciprocal Procurement, and supplier eligibility will be determined under the official solicitation documents. Bids may be submitted in English or French. This opportunity may be relevant to businesses with experience designing or integrating specialized mobile medical, emergency-response, vehicle-mounted, electrical, environmental, or defence-support systems. However, the tender information provided does not establish whether any particular business qualifies or can meet all mandatory requirements. The closing date is September 21, 2026, at 2:00 p.m. The notice lists Government of Canada documents, including the RFP and an amendment. Before deciding to bid, carefully review the complete official RFP, all amendments, mandatory technical and security requirements, delivery locations, submission instructions, Indigenous or reciprocal-procurement provisions if applicable, and any applicable certifications. Verify the closing time and current document versions on the official Canada Buys notice before submitting an offer.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This open ACAN (Advance Contract Award Notice) from Public Services and Procurement Canada (PSPC), on behalf of the Department of National Defence, concerns the supply of AN/SSQ-53G (GPS) DIFAR sonobuoys. The requirement is for six lots. Each lot contains 1,186sonobuoys: 1,152 for delivery and 34 for lot sample testing, for a stated total of 7,116 sonobuoys. Delivery is expected within 9 to 12 months. The requested item is identified as stock code 5845-01-663-0428 and part number 130-9044-101. A key condition is that the sonobuoys must already be flight-qualified for use on either the P-3 Orion or CP-140 Aurora aircraft. This is intended to avoid additional qualification and stores-clearance testing. The notice states that there are no security requirements. The notice appears highly specialized and potentially matches suppliers that already manufacture or distribute this exact product and can demonstrate the required aircraft qualification. It may not be a standard open competition because it is an ACAN; interested businesses should review the official notice for the applicable response process and any opportunity to challenge the proposed procurement.Closing date: September 21, 2026, at 23:45.Location listed: Gatineau, Quebec, Canada. The tender does not provide enough information here to assess a company’s eligibility, pricing, delivery arrangements, or ability to meet the technical requirements. Verify all requirements, dates, submission instructions, and supporting documents in theofficial tender notice before responding: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110024268?an Id=ANONYMOUS

Fire Services - Toronto, Ontario

Request for Proposals for Non-exclusive Radio Coverage and Performance Analysis of the City of Toronto Radio Infrastructure.Solicitation type: RFP