Browse active Canadian government contracts.

Parks Canada Agency (PC) - *Alberta, *Canada, Winnipeg, MB

Parks Canada appears to be seeking a contractor to supply, repair, and install W-beam highway barriers damaged by vehicle impacts and other incidents. The work covers Highway 16 in Jasper National Park, Highway 93N in Banff and Jasper National Parks, and the Trans-Canada Highway in Yoho National Park. Key details: -Tender: 5P468-26-0163/A — HOU-W- Beam Replacement, Jasper, Banff and Yoho National Park -Buyer: Parks Canada Agency -Status: Open -Closing: September 16, 2026 at 4:00 p.m. The applicable time zone and exact deadline should be confirmed in the official tender documents. -Expected completion: No later than October 15, 2026 - Estimated value: $100,001 to $250,000, before taxes -Bid process: Two-submission procedure; bidders should follow the requirements in section SI04 of the Special Instructions to Bidders. -Indigenous participation: The tender includes criteria intended to provide agreed socioeconomic benefits to Indigenous people and Indigenous businesses in the contract area. -Site visit: Recommended for September 4, 2026 at 10:00 a.m. MDT at the Jasper Compound, #1 Compound Road parking lot. Attendance is not stated to be mandatory, but no alternative visit is planned. Submission instructions are particularly important. Parks Canada says bids will be accepted only by fax or email as specified in the solicitation—not through SAP Ariba, in person, or by courier. The stated email is [email protected], and the stated fax number is 1-855-983-1808. Email attachments must be used; links to bid documents will not be accepted. The total email size must not exceed 15 MB, so multiple properly labelled emails may be needed. This opportunity may be relevant to a Canadian contractor experienced in highway barrier installation, roadside safety work, traffic control, and work in national parks. The tender documents should be reviewed for mandatory experience, bonding or insurance, equipment, safety, environmental, Indigenous participation, pricing, and two-submission requirements. Obtain the current documents and any addenda from Canada Buys before preparing a bid, and verify all deadlines, submission instructions, contact details, scope, and amendments in the official notice. This summary does not determine whether your business qualifies.

Royal Canadian Mounted Police (RCMP) - *Canada *Manitoba, *Manitoba, Edmonton, Alberta

This appears to be an open RCMP contract for demolishing and clearing a decommissioned detachment in Norway House, Manitoba. Work potentially includes asbestos abatement; demolition and disposal of the facility building, radio tower and tower foundation; removal of concrete sidewalks and wood parking fencing; and disconnecting and capping water and sewer services at the mains. Electrical service is shut off, but wiring remains connected. The anticipated start date is November 1, 2026, with the contract running until August 31, 2027. Bids close September 16, 2026, at 4:00 p.m. The tender is open only to Canadian suppliers and is set aside under the federal Procurement Strategy for Indigenous Business (PSIB). Suppliers would need to certify that they meet the applicable PSIB definition and requirements; businesses should verify their status and documentation before bidding. Contractors will reportedly require RCMP Facility Access Level I (FA1) security clearance. An optional Phase Two site visit may be offered, with details to be provided during Phase Two. Selection is based on the lowest-priced compliant bid, and submissions are to be emailed to [email protected]. Bids may be submitted in English or French. The tender information lists Norway House, Manitoba, but the location metadata also references Edmonton, Alberta and identifies the province as Alberta. Confirm the actual work location and all project details in the official solicitation documents. Review the attached solicitation and amendments carefully, including asbestos, demolition, disposal, safety, insurance, security, bonding, submission-format and Indigenous procurement requirements. The documents indicate that amendments and bidder questions will be posted through Canada Buys/GETS without individual notifications. Monitor the official tender listing regularly and verify the closing time, submission instructions, eligibility requirements and any site-visit details before submitting a bid. This summary is not a determination that any business qualifies.

Department of Agriculture and Agri-Food (AAFC) - *Canada, Regina, Saskatchewan

AAFC is seeking a contractor for janitorial services at the Beaverlodge Research Farm, located at 100038 Township Road 720 in the County of Grande Prairie, Alberta. The tender is currently open and appears potentially relevant to Canadian janitorial businesses able to service the site. Key details: -Buyer: Agriculture and Agri-Food Canada (AAFC) -Expected start date: November 1, 2026 -Initial contract term: 1 year -Extensions: Up to three additional one-year periods -Closing deadline: September 16, 2026 at 4:00 p.m. (time zone should be confirmed in the official solicitation) -Mandatory site visit: September 1, 2026 at 10:00 a.m. local MDT. The business owner or an authorized representative must attend for the offer to be considered. -Site visit contact: Zack Flamont, (639) 560-3462, [email protected] -Security: Personnel requiring access to sensitive work areas must hold, or receive approval for, valid Reliability Status security clearance through AAFC. -Submission: Offers may be submitted electronically through Canada Post’s CPC Connect service, following the instructions in Part 4 of the solicitation. -Evaluation: The offer must meet all mandatory requirements. Among responsive offers, the lowest evaluated aggregate price is expected to be recommended for award. -Language: Documents may be submitted in English or French. The listing identifies Regina, Saskatchewan as the location, but the service site is described as Beaverlodge Research Farm in Alberta. This discrepancy should be checked in the official tender documents. Review the full RFP, floor plans, addendum, mandatory requirements, pricing instructions, security conditions, and site-visit rules before deciding whether to bid. The official notice and attachments should be verified through Canada Buys/GETS. Amendments may be posted there without individual notification, so bidders are responsible for checking the portal regularly before submitting an offer. This summary does not confirm that any particular business qualifies or meets the tender requirements.

Defence Construction Canada - Pacific Region - Victoria, British Columbia

This appears to be a major construction opportunity from Defence Construction Canada for a three-storey accommodations building at 19 Wing, CFB Comox, near Lazo/Victoria, British Columbia. The estimated contract value is approximately $19 million. Key points: - The solicitation is open, but it is the second stage of a two-step process. Only contractors that responded to the earlier Request for Expression of Interest (RFEOI) are invited to bid. - Work is expected to include labour, materials, supervision, and equipment for the base-building construction. - Substantial Completion is required within 660 calendar days after contract award, with final completion due within 28 additional days. - A site visit is scheduled for July 9, 2026, at 2:00 p.m. local time at the DCC office, Building B306, 19 Wing, CFB Comox. Attendance is highly recommended. - The contract will include an Indigenous Benefits Plan intended to create opportunities for businesses owned and led by Indigenous Peoples. The tender documents should be reviewed for the specific requirements. - The bid closing time is September 16, 2026, at 5:00 p.m. - Bidding documents are available through MERX, and fees may apply. - Questions must be sent only to the point of contact identified in the official solicitation. Sending questions elsewhere could create a disqualification risk. This opportunity may be relevant to an experienced commercial or institutional construction contractor with the capacity to deliver a project of this size, but the RFEOI participation requirement is a critical gate. Review the official MERX notice and all tender documents to confirm invitation status, bonding, insurance, security, Indigenous Benefits Plan obligations, site-access rules, submission instructions, and any other mandatory requirements before deciding whether to bid.

Impact Assessment Agency of Canada (IAAC) - *Canada, Ottawa, ON

Impact Assessment Agency of Canada (IAAC) is seeking a contractor to provide simultaneous English–French interpretation for Regional and Strategic Assessment Division meetings and engagement activities. Services may be required virtually, in person, or in hybrid formats, primarily in Ottawa, Ontario, with meetings potentially held elsewhere in Canada. The work may include interpreting for 2- to 3-hour meetings involving approximately 25–35 participants, such as working groups, stakeholder meetings, partner meetings, and advisory sessions. The contractor may also support two-day in-person or hybrid meetings and may need to provide interpretation equipment and support personnel when required. The tender is listed as open and closes September 17, 2026, at 12:00 p.m. The opportunity appears potentially relevant to businesses that can deliver professional simultaneous interpretation in both official languages and support virtual and on-site meeting formats. This summary does not determine whether your business qualifies. Review the full tender notice, including mandatory experience, security, staffing, equipment, pricing, submission instructions, and any regional or availability requirements, before deciding whether to bid. Verify all details and the closing time in the official notice: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105381/iaac-rfp-virtual-and-in-person-simultaneous-translation-2026-09-01_0.pdf

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This open RFQ appears to seek Red Gate subscription licences for Statistics Canada. Public Services and Procurement Canada (PSPC) is managing the procurement on Statistics Canada’s behalf. Key details: - **RFQ:** 45045-260039 - **Tender reference:** PR25496-45045-260039 - **Closing date:** September 17, 2026, at 2:00 p.m. Eastern Time - **Location:** Canada, with Gatineau, Quebec listed - **Pricing:** All prices must be submitted in Canadian dollars - **Submission method:** Responses must be submitted through the SAP Ariba posting identified as **45045-260039**. Email submissions do not appear to be accepted based on the provided description. - **Procurement contact:** [email protected] - **Ariba support:** https://support.ariba.com/help The available information does not include the number or type of Red Gate licences, subscription term, technical requirements, or contract conditions. A business that supplies or resells the specified Red Gate products may find this opportunity potentially relevant, but should review the complete RFQ in SAP Ariba to confirm the requirements, eligibility conditions, pricing instructions, and submission process. Bid Maple is not affiliated with the Government of Canada. Verify all details in the official tender notice before submitting a bid.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

Public Services and Procurement Canada (PSPC) is seeking English-to-French translation services for parliamentary spoken language relating to current political affairs and committee work, classified as Tier 1. The opportunity is open and is located in Gatineau, Quebec, but it appears restricted to suppliers that are already pre-qualified under the relevant Supply Arrangement and have received a formal invitation. Businesses that are not invited may not be able to access the solicitation documents or submit an offer. PSPC plans to award two contracts. Each contract may cover up to 1,350,000words: 450,000 words during the initial one-year period, with up to two additional one-year extension options of up to 450,000 words each. The stated closing time is September 17, 2026, at 2:00 p.m. A translation company may find this potentially relevant if it holds the required Supply Arrangement qualification, has been formally invited, and can meet the solicitation’s language, service, security, capacity, and other requirements. This information does not establish eligibility. Verify the official tender notice, invitation status, Supply Arrangement requirements, submission instructions, and any amendments before deciding whether to bid. No official source or document link was provided here.

Department of National Defence (DND) - *Kingston, Kingston, ON

The Department of National Defence (DND) is seeking equipment for the Canadian Army Simulation Centre in Kingston, Ontario.The requirement appears to include: 60 steering wheels with pedals, 60 gearshifters, 120 joysticks, 60 gamepads, and 270 mousepads. The procurement is listed as open under file number W3915-270065/A, with a closing date of September 17, 2026, at 2:00 p.m. The Crown reserves the right to negotiate with suppliers. Suppliers may submit documents in either English or French. This opportunity may be relevant to businesses that can supply the specified training and gaming-control equipment, but businesses should review the full request for proposal and Amendment 1 to confirm specifications, delivery requirements, security or other conditions, and submission instructions. Verify all details in the official Canada Buys tender documents before preparing or submitting a bid.

Department of Public Works and Government Services (PSPC) - *Toronto, Gatineau, Quebec

**Tender summary —ACAN: Integrating Nephelometer** Environment and Climate Change Canada is seeking **one integrating nephelometer** for deployment at the Alert Global Atmosphere Watch site. The equipment will support Canada’s aerosol monitoring network by measuring the **light-scattering properties of atmospheric particles**. - **Buyer:** Public Works and Government Services Canada (PSPC), for ECCC - **Status:** Open - **Closing deadline:** September 17, 2026, at 2:00 p.m. - **Listed locations:** Toronto and Gatineau, Quebec - **Tender type:** ACAN (Advance Contract Award Notice) This opportunity appears relevant mainly to suppliers of specialized atmospheric-monitoring or aerosol-measurement instruments. An ACAN may indicate the government believes a particular supplier or solution can meet the requirement, but other suppliers may be able to challenge that position if they can demonstrate compliance with the stated requirements. The provided information does not include the official tender notice or technical specifications. Review the official notice carefully for the required instrument performance, compatibility, delivery terms, challenge process, submission method, and any mandatory conditions. **Late submissions will not be accepted.** Verify all details with the official tender documentation before deciding whether to submit a response.

Department of National Defence (DND) - *British Columbia *Nova Scotia, *Unspecified, Ottawa, Ontario

The Department of National Defence (DND) appears to be seeking spares for the Halifax-class main lube oil system, specifically components supporting the starboard main lube oil cooler. The tender is listed as open and closes September 17, 2026 at 2:00 p.m. (time zone should be confirmed in the official notice). Requested items: - 3 total Bush Front Cover units, part number WE17027, NCAGE K1750: 2 for CFB Halifax and 1 for CFB Esquimalt. - 3 total Control Assembly, Pneumatic units, part number WE20158-GA-NPT, NCAGE K1750: 2 for CFB Halifax and 1 for CFB Esquimalt. The listed manufacturer is Walton Engineering Co. Ltd. Delivery is requested at CFB Halifax, Nova Scotia, and CFB Esquimalt, British Columbia. The procurement may be relevant to businesses able to supply these specified parts or acceptable equivalent/substitute products. Businesses offering an equivalent or substitute must provide the brand, model and/or part number, and NCAGE. Bidders are expected to submit the required documents in the specified formats, including the Offeror Submission Details in both original Excel and PDF formats, the Offeror Submission Form in PDF, and the Offeror Declaration Form in PDF. The tender states that submissions may be made in either official language and that the Crown may negotiate with suppliers. This summary does not establish that your business qualifies or that the parts will be accepted. Review the official RFP and annexes carefully—particularly the Statement of Requirements, submission instructions, delivery terms, technical requirements, and closing time—before deciding whether to bid.Official documents provided include: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105642/w8482-275494-rfp-en.pdf, https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105642/w8482-275494-annex-sor-and-osd-en.xlsx, and https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105642/w8482-275494-annex-osd-en.pdf.

Department of National Defence (DND) - *Nova Scotia, *World, Ottawa, Ontario

This appears to be an open Department of National Defence procurement for 2 sleeve bearings, part number 68648 (NCAGE 36219), under GSIN 3120. Delivery is requested to CFB Halifax, Nova Scotia. The tender closes September 17, 2026, at 2:00 p.m. (the time zone should be confirmed in the official notice). Potentially relevant suppliers would need to review the complete solicitation and demonstrate, among other things, that: - The manufacturer is listed on Lloyd’s Register’s approved-manufacturer list. - The manufacturing facility and production processes have a valid Lloyd’s Register Works Certificate. - The material will be manufactured, tested, and inspected under the current LR-RU-002 rules. - The supplied material includes Lloyd’s Register Material Certification, EN 10204 type 3.2, from an approved facility. - Test reports or certifications show hydrostatic testing of the casting to at least 350 MPa (50 psi) for 10 minutes for porosity. The submission appears to require the Offeror Submission Details in both original Excel and PDF formats, along with the Offeror Submission Form and Offeror Declaration Form in PDF. Additional requirements and clauses are contained in the attached RFP and Statement of Requirements, including references to SOO sections 5.4 and 12 and RCC sections 19.19 and 29. Offers may be submitted in either official language, and the Crown reserves the right to negotiate. A Canadian business should carefully review the complete official documents before deciding whether to bid, especially the technical specifications, certification requirements, delivery terms, closing time, and submission instructions. This summary does not confirm that any company qualifies. Documents provided with the notice include: -RFP: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105626/w8482-265061-rfp-eng_0.pdf -Annex SOR and OSD: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105626/w8482-265061a-annex-sor-and-osd-en.xlsx -Annex OSD PDF: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105626/w8482-265061a-annex-osd-en.pdf

Royal Canadian Mounted Police (RCMP) - *National Capital Region (NCR), *Ottawa, Ottawa, Ontario

**Tender summary — RCMP Stream 1: Applications Services** The Royal Canadian Mounted Police is seeking specialized Share Point, Microsoft 365 and Power Apps support for its Federal Policing Strategic Management branch. The work may include troubleshooting, migrating from Share Point 2019 to Share Point Online, developing Share Point/Nintex/Power Apps solutions, and providing implementation guidance. **Resources requested:** - 1 Application/Software Architect — Level 3 - 2 Programmer/Software Developers — Level 2 **Contract details:** - One contract is expected to be awarded. -Initial term: from contract award through two years after award. - Includes one additional, irrevocable one-year option. -Estimated effort: 240 days per resource. -Location: Ottawa/National Capital Region, Ontario. -Closing date: September 17, 2026, at 2:00 p.m. The tender does not specify a time zone in the information provided. **Important eligibility restriction:** This opportunity is open only to TBIPS Supply Arrangement holders under EN578-170432 that qualified under Tier 1 for the National Capital Region and the applicable Stream 1 categories. The notice lists 15 invited suppliers, so it appears to be a directed invitation rather than an open competition for all businesses. The RFP documents are to be distributed directly by the contracting authority to the invited qualified holders. **Security:** Security requirements apply, including Enhanced Reliability Status for the organization and a minimum of three personnel security clearances/resources as specified. The notice states that a holder does not need to already have the required clearance to submit a bid, but the full RFP and resulting contract clauses should be reviewed carefully. The procurement is subject to several trade agreements, including CFTA, CETA, CPTPP and WTO-GPA. The file number is **202606043**. The contracting authority is **Connie Wright**, reachable at **[email protected]** or **613-791-9647**. This opportunity appears relevant primarily to an invited TBIPS Supply Arrangement holder with the required NCR Tier 1 status and experience in Share Point, M365, Nintex and Power Apps. Businesses should not rely on this summary to determine eligibility. Verify the complete official RFP, security clauses, submission instructions, deadlines and applicable qualifications directly with the contracting authority before preparing or submitting a bid.