Browse active Canadian government contracts.

Department of Public Works and Government Services (PSPC) - *Newfoundland and Labrador, Gatineau, Quebec

This appears to be an open federal tender from PSPC titled "W0123-24CM01B Digital Television Service." It is listed for Newfoundland and Labrador and Gatineau, Quebec, with a closing date of September 14, 2026 at 2:00 PM. The notice category is services, but the provided description is blank, so the scope is not clear from the data given. For a Canadian business, this potentially matches firms that provide digital television-related services, but you should verify the official tender notice and any attached documents before deciding whether to bid. The official source is the Ariba notice at the link provided.

Public Works and Government Services Canada - *Northwest Territories *Nova Scotia *New Brunswick *Newfoundland and Labrador *Nunavut Territory *Yukon *Quebec (except NCR) *British Columbia *Manitoba *Saskatchewan *National Capital Region (NCR) *Ontario (except NCR) *Prince Edward Island *Alberta, Gatineau, Quebec

Public Works and Government Services Canada (PWGSC) appears to be seeking suppliers for hazardous waste disposal services across Canada, including one or more provinces or territories. The work may include identifying, labelling, packaging, preparing profile documentation, loading, transporting, and disposing of or destroying hazardous waste generated by federal departments and agencies. This is an open request for supply arrangements rather than a single fixed project. Successful arrangements may lead to future, smaller bid opportunities. The arrangements are intended to remain in place until PWGSC no longer considers them advantageous, and will replace earlier hazardous-waste supply arrangements. Potentially relevant businesses would generally need the required licences and permits to provide hazardous-waste disposal services in at least one Canadian province or territory. Suppliers may apply under a General stream or, where applicable, a Procurement Strategy for Aboriginal Business (PSAB) stream. Suppliers in either stream must appear able to serve Canada nationally or at least one defined Canadian region. The notice describes different procedures and thresholds for lower-value requirements; requirements above the stated $400,000 departmental contracting limit are outside these supply arrangements and would be handled separately. The listed closing date is September 14, 2026, at 2:00 p.m. The listed service locations cover most or all Canadian provinces and territories, including the National Capital Region, with some regional exceptions noted in the notice. The tender references CETA, WTO-AGP, CPTPP, CFTA, and several other trade agreements. A business should review the complete RFSA, including licensing, insurance, technical, safety, transportation, documentation, regional, Indigenous procurement, and submission requirements. The supplied record does not include an official source URL,but it includes this document link: https://canadabuys.canada.ca/documents/pub/att/2020/11/13/0cead1eeb0190bc86cac6e527cea7333/ABES.PROD.PW_NCS.B030.E11940.EBSU000.PDF. Verify the current official tender notice, all amendments, the exact closing time, and submission instructions with Canada Buys before deciding whether to submit an arrangement. This summary does not determine whether any particular business qualifies.

Royal Canadian Mounted Police (RCMP) - *Arviat *Cambridge Bay, *Canada, Edmonton, Alberta

The RCMP is seeking mechanical maintenance services for its detachments in Arviat and Cambridge Bay, Nunavut. The contract term is expected to be 12 months from award, and the requirement includes a security component. This opportunity appears restricted to firms registered on the Inuit Firm Registry (IFR). A business that is not registered on the IFR may have its bid declared non-responsive. The procurement is also subject to the Nunavut Land Claims Agreement and includes Inuit and Nunavut socio-economic benefit requirements. Bidders are expected to propose Inuit employment, subcontracting, training and business participation through an Inuit Benefits Plan. Bidswill be evaluated using a combined score: 30% Inuit Benefits Plan merit, 30% technical merit and 40% price. All mandatory requirements must be met. The solicitation is open to Canadian suppliers and suppliers from applicable trading partners, subject to the stated restrictions. The closing date is September 14, 2026, at 4:00 p.m. The notice says bids must be emailed to the RCMP Bid Receiving Unit at [email protected]. English or French submissions may be accepted. Review the official RFP and annexes carefully, including the security guide and integrity-verification form. Confirm IFR registration, security requirements, service specifications, submission instructions and any mandatory forms before preparing a bid. Regularly check the official Canada Buys/GETS tender listing for amendments, questions and updated documents, as notifications may not be sent directly. This summary does not determine whether your business is eligible or qualifies to bid.

Canadian Food Inspection Agency (CFIA) - *Saskatchewan *British Columbia *Manitoba *Alberta, *Canada, Ottawa, Ontario

The Canadian Food Inspection Agency (CFIA) is seeking a supplier for laundry and garment rental services at establishments in British Columbia, Alberta, Saskatchewan, and Manitoba. This opportunity appears relevant to Canadian businesses that can provide these services in one or more of the four provinces. Bidders may submit an offer for any number of provinces, from one to all four; however, the tender documents should be reviewed to confirm the required service locations, delivery arrangements, garment specifications, service standards, pricing format, and other conditions. The tender is currently listed as open and is scheduled to close on September 14, 2026, at 4:00 p.m. The notice references an amendment dated September 9, 2026, as well as a basis-of-payment document and the original RFP. Download and review all available documents, including Amendment 2026-00625-RFP-AM01, before preparing a submission. The listing does not provide a direct official-source webpage, so verify the tender and closing details on the official Canada Buys notice and confirm whether any further amendments have been issued before bidding. This summary does not determine whether your business qualifies.

Royal Canadian Mounted Police (RCMP) - *British Columbia, *Canada, Surrey, BC

The RCMP is seeking proposals for one wet chemical processing station with a vented fume hood, specified as a DFMZ WPB-8R Wet Processing Hood or an equivalent product. The equipment is to be delivered in British Columbia by March 31, 2027. This is an open Request for Proposal under the Canadian Free Trade Agreement. The notice states that bidding is limited to Canadian suppliers, and selection is expected to be based on the lowest-priced compliant proposal. The applicable category is laboratory equipment and supplies, including fume hoods. Proposals are to be submitted by email to [email protected], attention Sherry Chen. The tender notice lists a closing time of September 14, 2026, at 2:00 p.m. Pacific Time, while the tender record shows 5:00 p.m.; this discrepancy should be confirmed in the official solicitation documents before submitting. A business that supplies suitable laboratory or chemical-processing equipment, or an equivalent compliant product, may find this opportunity potentially relevant. Review the full RFP, technical requirements, amendments, delivery conditions, submission instructions, and supplier-integrity provisions carefully. Check the official Canada Buys notice regularly for amendments, as the government states that updates will be posted there and may not be sent directly to bidders. Verify all details with the official tender documents before preparing or submitting a bid.

Government of the Northwest Territories (GNWT) - *Northwest Territories, Hay River, NT

This tender appears relevant to businesses that provide airport operations and maintenance services. The Government of the Northwest Territories is seeking a contractor for operations and maintenance at the Fort Good Hope Airport, NT, with documents and any addenda posted through the GNWT contracts portal. The closing date is 2026-09-14 at 5:00 PM. Because details can change, review the official notice and all tender documents carefully before deciding whether to bid, and verify scope, requirements, site conditions, insurance, staffing, and any addenda directly on the GNWT procurement site.

Department of National Defence (DND) - *Kingston *Ontario (except NCR) *Canada, *Canada, Oromocto, NB

The Department of National Defence (DND) appears to be seeking suppliers for utility poles under file W2037-27-0466/A. The procurement is listed as open and may involve delivery or performance in Kingston, Ontario (excluding the National Capital Region), Oromocto, New Brunswick, and/or other Canadian locations stated in the tender documents. The tender indicates a preference for Canadian goods and/or services. Documents may be submitted in English or French, and Canada reserves the right to negotiate with suppliers. The stated closing date is September 15, 2026, at 12:00 p.m. Confirm the applicable time zone and all submission requirements in the latest amendment before preparing a bid. Potentially relevant businesses may include suppliers or distributors of utility poles, but the required specifications, quantities, standards, delivery terms, security or registration requirements, and evaluation criteria must be reviewed in the official solicitation and amendments. The listed contracting authority is Aaron Pound at [email protected]. Verify the complete official notice, including amendments 001–003 and the solicitation document, before submitting anything; this summary does not confirm eligibility or compliance.

Department of National Defence (DND) - *Quinte West, Oromocto, NB

The Department of National Defence (DND) appears to be seeking suppliers for full-face and open-face impact-rated parachuting helmets in various types and sizes. The helmets would support Canadian Armed Forces military freefall parachutist training, including the Military Square Parachute Instructor course and the CAF Parachute Team (The Sky Hawks). Key details: -Tender status: Open -Closing date: September 15, 2026 at 1:00 p.m. -Locations: Quinte West and Oromocto, New Brunswick -File number: W2037-27-0420/A - A preference may apply for Canadian goods and/or services. - Canada reserves the right to negotiate with suppliers. - Submissions may be provided in English or French. -Contracting authority: MCpl Tiffany Huntington — [email protected] This opportunity potentially matches businesses that can supply military or impact-rated parachuting helmets meeting the specifications in the tender documents. The available documents include an amendment, the helmet requirement notice, and a notice of proposed procurement. Review all documents carefully for technical specifications, approved standards, quantities, delivery requirements, submission instructions, and any amendment changes. Bid Maple is not affiliated with the Government of Canada, and this summary does not confirm eligibility or qualification. Verify the complete official tender notice and current documents on Canada Buys before submitting a bid.

Royal Canadian Mounted Police (RCMP) - *New Brunswick, Dartmouth, NS

The RCMP appears to be seeking one towed side-scan sonar system for its Underwater Recovery Team. The system would need to operate in both saltwater and freshwater, as well as moving and still water. The procurement also potentially includes warranty, sonar maintenance, and technical support services. Key details: -Buyer: Royal Canadian Mounted Police (RCMP) -Status: Open -Bid deadline: September 15, 2026 at 1:00 p.m. [time zone should be confirmed in the official documents] -Deliverables due: On or before January 31, 2027 -Listed location: New Brunswick and Dartmouth, Nova Scotia; the exact delivery, service, or performance requirements should be confirmed in the tender documents -Evaluation: Bids must meet all mandatory solicitation and technical requirements. Among responsive bids, the lowest evaluated price is expected to be recommended for award. -Submission method: Email to [email protected] -Official languages: Bids may be submitted in English or French. The tender also refers to supplier integrity and compliance requirements, environmentally preferable packaging requirements, and the federal Indigenous Business Directory and related procurement programs. These references do not indicate that the opportunity is restricted to Indigenous businesses. A supplier offering marine-survey, underwater-recovery, sonar, equipment-support, or related services may find this opportunity potentially relevant, provided it can meet the detailed mandatory specifications, delivery requirements, warranty and support obligations, and any other conditions in the solicitation. Before preparing a bid, review the full tender document at https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105257/m4500-7-0483_en.pdf and check the Government Electronic Tendering Service (GETS) regularly for amendments, questions and answers, and the most current submission instructions. The information provided here is only a summary; the official tender notice and attached documents control, and should be verified before submitting a bid.

Correctional Service of Canada (CSC) - *Prince Albert, Saskatoon, Saskatchewan

This appears to be an open construction opportunity from the Correctional Service of Canada for relining the existing sanitary sewer main in the E and F range ducts at Saskatchewan Penitentiary in Prince Albert, Saskatchewan. The work is expected to use cured-in-place pipe (CIPP) technology to restore the sewer’s structural integrity, reduce infiltration and exfiltration, and extend its service life while minimizing disruption to prison operations. The contractor would generally need to: - Complete the work during regular weekday hours, Monday to Friday from 8:00 a.m. to 4:00 p.m. - Finish the construction work within 26 weeks. - Provide a detailed schedule after contract award. - Keep noise, dust, odours, and other disruptions to a minimum. - Coordinate planned disruptions with CSC staff. - Cooperate with operational personnel and follow site security procedures while working at the penitentiary. - Provide pre- and post-installation CCTV footage, installation and curing records, QA/QC documentation, photographs, as-built records, and final CCTV inspection results. - Submit operation and maintenance manuals covering product information, maintenance schedules, and warranty details before substantial completion. The notice states that the procurement is open only to Canadian suppliers, is subject to the Canadian Free Trade Agreement, and is not set aside under the Procurement Strategy for Indigenous Business. It also states that no contract security requirements apply, although contractors and subcontractors would still need to follow the penitentiary’s operational and site-security procedures. The contract is expected to be awarded to the lowest-priced compliant bidder.Closing date: September 15, 2026 at 1:00 p.m. The opportunity may be potentially relevant to Canadian sewer rehabilitation, trenchless technology, CIPP, civil construction, or related contractors with the required equipment, personnel, documentation capability, and experience. The summary does not establish whether any particular business qualifies or can meet all mandatory conditions. Before deciding to bid, review the complete official solicitation, statement of work, basis of payment, specifications, submission instructions, and all amendments—particularly the questions and Amendment 01 document. Confirm the closing time, mandatory requirements, insurance or bonding provisions, site-access procedures, technical standards, subcontracting rules, and pricing requirements directly in the official tender documents.Official documents provided: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104689/2026-08-24-1-25-invitation-to-tender-english_1.pdf; https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104689/2026-09-02-11-07-questions-amd-01.pdf; https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104689/2026-08-24-11-49-npp-english_0.pdf

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

Public Services and Procurement Canada (PSPC) is seeking quotes on behalf of the Public Health Agency of Canada for Splunk subscription licences. This appears relevant to businesses that can supply the specified Splunk subscriptions and meet the RFQ’s requirements. Key details: -Tender: PR25673 / RFQ 6D063-265681 -Status: Open -Closing deadline: September 15, 2026, at 2:00 p.m. EST -Location: Canada; Gatineau, Quebec is listed -Pricing: All prices must be submitted in Canadian dollars (CAD) -Buyer: Department of Public Works and Government Services Canada -Questions: [email protected] -Ariba support: https://support.ariba.com/help The available information does not include the detailed licence quantities, subscription terms, technical requirements, evaluation criteria, submission instructions, or any mandatory conditions. There is also no official tender link or document attached here. Review the complete official RFQ notice and confirm all requirements, registration steps, and submission deadlines before deciding whether to bid. Late submissions may be deemed non-compliant.

Department of Justice (JUS) - *National Capital Region (NCR), *Canada, Ottawa, Ontario

This appears to be an open Department of Justice Canada opportunity for the purchase, delivery, and installation of office seating in Ottawa, Ontario, within the National Capital Region. The requirement covers rotary chairs and rotary stools, with delivery and installation required by December 1, 2026. Bids close September 15, 2026, at 2:00 p.m. The procurement is being conducted under PWGSC Supply Arrangement E60PQ-120001/H and is limited to suppliers that hold the relevant supply arrangement, including eligible PSIB suppliers. A non-supply-arrangement holder may submit a bid and apply for an arrangement at the same time, but cannot receive a contract unless PWGSC issues the required arrangement; the government is not required to delay the award while that application is evaluated. No security requirement is identified. Businesses should review the full official tender notice and supply-arrangement requirements carefully before deciding whether to bid. Questions should be directed to Ryan Greig at [email protected] tender document: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105742/1000037101_rfb_eng.pdf