Browse active Canadian government contracts.

Department of Public Works and Government Services (PSPC) - *Ottawa, Gatineau, Quebec

This tender appears to be for the RCMP’s purchase of 3,816 pairs of brown, unlined leather gloves for men and women, with possible option quantities and additional as-and-when quantities. PSPC is the buyer, the location is Ottawa/Gatineau, and the closing time is 2026-09-14 at 2:00 PM. The notice says up to two contracts may be awarded in a 60/40 split. It also states the requirement is limited to Canadian goods under the Canadian Free Trade Agreement, and that Canadian suppliers, suppliers from applicable trading partners, and suppliers from non-trading partners may be eligible, barring sanctions or other conditions. This appears relevant if your business supplies gloves or similar protective/workwear products, but you should verify the full official notice and specification G.S.1045-044 before deciding to bid. Late submissions will not be accepted.

Canadian Accessibility Standards Development Organization - Gatineau, Quebec

This open tender appears to seek professional service providers to support accessibility standards work, including research related to accessibility standards, the areas identified in section 5 of the Accessible Canada Act, and other topics that may inform standards. The title references ASL and LSQ services—likely American Sign Language and Langue des signes québécoise—but the exact service requirements should be confirmed in the tender documents. The buyer is the Canadian Accessibility Standards Development Organization. The work is associated with Gatineau, Quebec, and the submission deadline is September 14, 2026, at 2:00 p.m. The opportunity is structured as a Request for Supply Arrangements (RFSA), which may establish arrangements with selected suppliers for future service requirements rather than guarantee a specific contract value or volume. It could be potentially relevant to businesses with experience in accessibility research, standards development, consultation, or ASL/LSQ-related professional services. The notice includes the main RFSA document and several amendments, which should all be reviewed for updated requirements, evaluation criteria, security or registration conditions, submission instructions, and applicable deadlines. No official source page was provided in the tender data. Before deciding whether to respond, verify the complete and current notice and all amendments on the Government of Canada tendering system, and confirm the final submission requirements directly from the official documents.

Department of National Defence (DND) - *Canada, *Unspecified, Ottawa, Ontario

The Department of National Defence (DND) appears to be seeking nonmetallic hose sets and hose assemblies for delivery to CFB Halifax, Nova Scotia, and CFB Esquimalt, British Columbia. The tender is currently listed as open and closes September 14, 2026, at 2:00 p.m. (time zone should be confirmed in the official notice). Requirements: - 10hose sets total: Part No. CB122P0442-0194, Danfoss Power Solutions II, LLC, NCAGE 01276 — 5 for Halifax and 5 for Esquimalt. - 8hose assemblies total: Part No. CB122M0143-0314, Danfoss Power Solutions II, LLC, NCAGE 01276 — 4 for Halifax and 4 for Esquimalt. - Goods are classified under GSIN 4720. Bids will be evaluated on a Delivery Duty Paid (DDP) basis, so pricing may need to include delivery and applicable associated costs to both locations. Suppliers proposing an equivalent or substitute product must identify the brand, model and/or part number, and NCAGE. The notice indicates that bidders must submit the required offeror documents, including the Offeror Submission Details in both the original Excel format and PDF format, along with the Offeror Submission Form and Offeror Declaration Form in PDF. The solicitation’s Statement of Requirements and other clauses may contain additional technical, delivery, packaging, pricing, and submission conditions. Documents may be submitted in English or French. This opportunity potentially matches businesses that can supply the specified Danfoss parts or acceptable equivalents and meet DDP delivery requirements to both military bases. It is important to review the complete official tender package, including any amendment, before deciding whether to bid. Confirm the closing time, technical specifications, equivalency rules, delivery terms, and submission process directly through the official Canada Buys notice; the information provided here does not establish eligibility or guarantee compliance.

National Research Council of Canada (NRC) - *Ontario (except NCR) *Canada, *World, Mississauga, Ontario

This appears to be an open Request for Proposal from the National Research Council of Canada (NRC) for one high-resolution light-field snapshot hyperspectral camera, specifically the Cubert ULTRIS X20 Plus and Flight Pro package, for research, testing, validation, and operational use. The buyer is NRC, the delivery location is Ontario (Mississauga area), and the closing date is September 14, 2026 at 2:00 PM EST. The notice says offers may be submitted by Canadian suppliers and certain foreign suppliers, subject to the solicitation rules and any sanctions. The selection basis is lowest evaluated price with mandatory technical criteria, so the technical requirements in the tender documents will matter a lot. Deliverables are due by March 31, 2027. Bidders should review the official documents on Canada Buys and verify all mandatory specs, submission instructions, and amendments before bidding.

Department of Industry (ISED) - Ottawa, Ontario

This tender appears relevant to firms that provide senior application/software architecture services, especially Java-based consulting. It is an open procurement from the Department of Industry (ISED) in Ottawa, Ontario, with a closing date of 2026-09-14 at 14:00. The work described is for a Level 3 Application/Software Architect and includes designing and implementing architecture for application systems, translating business needs into solution designs, advising staff and management, producing design and configuration documentation, leading solution design sessions, recommending best practices, and supporting knowledge transfer.In plain English: the buyer is looking for an experienced architect who can help plan, design, document, and present a software solution, likely within an existing government environment. The notice suggests a strong focus on solution architecture, integration, performance, scaling, and stakeholder communication. A Canadian business with consulting experience in Java application architecture, enterprise solution design, and government-facing IT work may want to review this opportunity closely. However, you should verify all requirements, evaluation criteria, and submission instructions in the official tender notice and PDF before deciding whether to bid. The provided document link should be checked directly, since the official notice details are what matter for submission.

Department of Public Works and Government Services (PSPC) - *Quebec (except NCR), Gatineau, Quebec

**Tender:** F3065-265009 – Standing Offer for Repair and Maintenance of Volvo Penta Equipment **Buyer:** Public Works and Government Services Canada (PWGSC), on behalf of the Canadian Coast Guard **Status:** Open **Closing date:** September 14, 2026 at 2:00 p.m. **Service area:** Quebec, excluding the National Capital Region, and Gatineau, Quebec. The work relates to Canadian Coast Guard vessels operating in the Quebec and Ontario regions. **What is being requested:** The tender appears to seek suppliers that can provide, as needed: - Repair and maintenance services for Volvo Penta engines and transmissions - Supply of replacement and spare parts - Services for Canadian Coast Guard vessels - Work under a standing offer arrangement rather than one guaranteed, fixed-volume contract This opportunity may be relevant to businesses experienced with Volvo Penta marine engines and transmissions, vessel maintenance, parts supply, and servicing in the stated geographic area. The tender summary does not provide enough information to determine whether a particular business meets all requirements. Review the official tender notice and its Statement of Requirements for mandatory qualifications, certifications, response procedures, pricing requirements, service standards, vessel access or security requirements, parts specifications, and any limits on the standing offer. Confirm the closing time and submission instructions directly in the official notice before submitting a bid. **Official source:** https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110021916?an Id=ANONYMOUS

Canada Revenue Agency (CRA) - *National Capital Region (NCR), *World, Ottawa, Ontario

The Canada Revenue Agency (CRA) is seeking one contractor to provide a cloud-based software-as-a-service interface design and prototyping tool. The tool would support approximately 40 user licences—described in the notice as 30 designer licences and 10 partner licences—with collaboration features such as viewing, commenting and editing without requiring every participant to hold a full licence. The solution would be used for CRA digital content, including intranet, secure portal and Canada.ca pages. The expected contract term is one firm year, with options for up to five additional one-year extensions. The solicitation also includes options to purchase additional licences. The tender is open and is listed for the National Capital Region, Ottawa, Ontario, and potentially worldwide service delivery. The stated closing date is September 14, 2026 at 2:00 p.m.; the official notice should be checked to confirm the applicable time zone and any updated deadline. Only Canadian suppliers and suppliers from applicable reciprocal-trade partner countries appear eligible. Suppliers from non-trading partners will be rejected. Bids must meet all mandatory requirements and evaluation criteria. The responsive bid with the lowest evaluated price is expected to proceed to Proof of Proposal testing, subject to the solicitation rules. Bids must be submitted through Canada Post’s Connect service. The CRA’s bid-receiving email address is used to request a Connect conversation, not to send the proposal directly. Questions are to be sent in writing to [email protected]. This revised solicitation, 1000439295/A, cancels and replaces the earlier version. The notice indicates that previous bidders must submit an entirely new proposal. Changes include removal of two mandatory criteria, a reduction from 80 to 40 firm licences, updated accessibility requirements and a new licence category. A business offering suitable collaborative design/prototyping SaaS may find this opportunity potentially relevant, but this does not establish eligibility or compliance. Review the complete official RFP, all amendments and annexes—particularly the mandatory criteria, security, accessibility, licensing, pricing, Proof of Proposal and submission instructions—before deciding whether to bid. The listed documents are available through the Canada Buys links provided in the tender record.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

PWGSC, on behalf of the Canadian Coast Guard, is seeking suppliers for containment booms and related accessories, including 18- and 24-inch curtain booms, 18- and 24-inch fence booms, ASTM Z end connectors, and 24-inch curtain booms with shotgun end connectors. The procurement is open and closes September 14, 2026, at 2:00 p.m. The listed location is Gatineau, Quebec, although the requirements may apply across Canada. Importantly, this RFP appears limited to suppliers already qualified under Supply Arrangement/RFSA F7047-220006, “Containment Boom.” Businesses that are not already qualified may need to pursue the separate RFSA qualification process before being eligible for this opportunity. Full technical requirements and accessories are referenced in Annex A – Statement of Work, which was not included here. Review the official tender notice and all attached documents carefully to confirm eligibility, specifications, submission procedures,and deadlines before submitting a bid: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110021125?an Id=ANONYMOUS

Department of National Defence (DND) - *British Columbia *Nova Scotia, *World, Ottawa, Ontario

The Department of National Defence is seeking several Victoria-class submarine spare parts.The requirement appears to include: 3 recorders (NSN 21-854-6573, part no. 875-200); 4 control training sonar units (NSN 99-749-6500, listed part numbers 354/2201 and WWR354-2201-ASY-09); and 7 recording charts (NSN 00-813-5786, part no. 875D559). Deliveries are requested at CFB Esquimalt, British Columbia, and CFB Halifax, Nova Scotia, with quantities divided between those locations. The tender is open and is scheduled to close on September 14, 2026, at 2:00 p.m.; the applicable time zone should be confirmed in the official notice. Suppliers offering equivalent or substitute products must provide the brand, model or part number, and NCAGE. The procurement is subject to Canada’s Controlled Goods Program, so applicable registration, security, and handling requirements may apply. Bids may be submitted in English or French, and the Crown reserves the right to negotiate. This opportunity potentially matches businesses able to supply the specified defence components and meet the delivery and controlled-goods requirements, but no conclusion can be made about eligibility from the information provided. Review the complete official tender notice, including the RFP and annexes, to confirm specifications, terms, certifications, submission instructions, and the closing details before submitting a bid.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This open PSPC tender is seeking licensed security guard companies for services provided on an “as and when requested” basis at locations across Canada. It is a Request for Supply Arrangements, meaning successful suppliers may be added to an arrangement and could later receive requests for specific work; the notice does not guarantee any contract volume. There are two streams: -General Stream: Services across one or more Canadian provinces or territories, except areas covered by Comprehensive Land Claims. - Procurement Strategy for Indigenous Business (PSIB)Stream: For Indigenous businesses meeting the PSIB definition, with the same geographic scope. The tender is listed for Gatineau, Quebec, but the required services may apply across Canada. The closing deadline is September 14, 2026, at 2:00 p.m. Late submissions will not be accepted. A security company that holds the required licences and can provide coverage in one or more provinces or territories appears potentially relevant. Businesses should review the official tender notice for licensing, experience, personnel, insurance, Indigenous-business requirements, submission instructions, and any regional conditions before deciding whether to respond. Verify the deadline, eligibility details, and all mandatory requirements directly in the official notice: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110019212?an Id=ANONYMOUS

Department of National Defence (DND) - *Quebec (except NCR) *Alberta, *World, Ottawa, Ontario

This appears to be an open Department of National Defence procurement for components used in Mobile Kitchen Trailers (MKT). The requirement covers numerous parts, including hoses and hose assemblies, propane burners, cabinets, doors, straps, pins, brackets, connectors, racks, latches and other trailer or kitchen-equipment components. The supplied notice is truncated after Item 25, so the complete item list, quantities and specifications must be reviewed in the official documents. The listed delivery requirement is February 26, 2027, with deliveries primarily directed to 25 Canadian Forces Supply Depot (25 CFSD) in Montreal, Quebec. The tender information also references Edmonton/Montreal, and the location field includes Quebec outside the National Capital Region, Alberta, Ottawa/Ontario and worldwide. Confirm the applicable delivery locations in the complete solicitation. The closing date is September 14, 2026 at 2:00 p.m. The notice says this deadline was extended because a required drawing was initially absent. Amendments 001, 002 and 003 may change specifications, answers to supplier questions or other submission requirements. Offers must be submitted in Canadian dollars, with applicable taxes excluded, and delivery costs plus Canadian customs duties and excise taxes included. Some parts appear to be identified by National Stock Numbers, part numbers and CAGE/NSCM codes, suggesting that exact item conformity, approved sources or technical documentation may be important. The notice includes both specific part numbers and, for some items, alternate part-number/manufacturer-code information; these details should be checked carefully before pricing. This opportunity potentially matches a Canadian manufacturer, authorized distributor or supplier able to source or produce military or commercial kitchen-trailer components and meet the required delivery schedule. Businesses should assess their ability to supply the exact specifications, quantities, documentation, quality requirements and delivery terms. The tender does not establish that any particular business qualifies. Review the complete RFP and all amendments before deciding whether to bid, especially the full list of items, drawings, evaluation rules, security or registration requirements, substitution rules and submission instructions. Verify the current official tender notice on Canada Buys before submitting an offer. Bid Maple is not affiliated with the Government of Canada.

Department of Public Works and Government Services (PSPC) - *Northwest Territories, Gatineau, Quebec

##Tender summary: 23429-260912 Modular Shelters **Buyer:** Public Works and Government Services Canada (PSPC), for Natural Resources Canada (NRCan) **Status:** Open **Closing date:** September 14, 2026, at 2:00 p.m. **Delivery location:** Inuvik Satellite Station Facility, Inuvik, Northwest Territories **Listed location:** Northwest Territories and Gatineau, Quebec ### What is being purchased The requirement appears to be for: - One modular storage garage; and - One modular field shelter. Both units would need to be delivered to NRCan’s facility in Inuvik, Northwest Territories, likely involving significant transportation and logistics planning. ### Businesses that may want to review it This opportunity potentially matches Canadian businesses involved in modular buildings or shelters, prefabricated structures, storage garages, construction or installation services, and northern or remote-site delivery logistics. The tender details may specify technical standards, installation responsibilities, warranty requirements, security conditions, Indigenous or local participation considerations, and other mandatory requirements. This summary does not establish that any company qualifies or can meet the requirements. Interested businesses should review the complete official tender notice and all associated documents, including submission instructions and any amendments, before deciding whether to bid. **Official tender notice:** https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110013397?an Id=ANONYMOUS