Browse active Canadian government contracts.

Federal Economic Development Agency for Southern Ontario (FedDev Ontario) - *Ontario (except NCR), Ottawa, Ontario

**Tender summary — Ottawa quiet booths / office furniture** - **Buyer:** Federal Economic Development Agency for Southern Ontario (Fed Dev Ontario) - **Tender status:** Open - **Closing date:** September 18, 2026 at 2:00 p.m. - **Delivery and installation:** Ottawa, Ontario, required by November 6, 2026 - **Requirement:** Purchase, delivery, and installation of office furniture, specifically **phone booths and pods** under Product Category 4 of Supply Arrangement (SA) E60PQ-140003/D. - **Procurement process:** The opportunity appears to be limited to suppliers in the **General Stream of the applicable federal Supply Arrangement**. If two or more Indigenous businesses submit bids, the procurement may be set aside under the Procurement Strategy for Indigenous Business (PSIB), with only those Indigenous bids assessed. - **Security:** No security requirement is identified in the notice. - **Questions:** Send questions to both [email protected] and [email protected]. This opportunity potentially matches a business that is an eligible holder of the referenced Supply Arrangement and can supply, deliver, and install phone booths or pods in Ottawa. The notice does not by itself establish that any particular company is eligible or able to meet the technical, delivery, or commercial requirements. Before submitting anything, review the full bid solicitation, product-builder annex, floor plans, and all posted amendments on the official Canada Buys tender record. Confirm the current closing time, specifications, quantities, delivery requirements, submission instructions, and Supply Arrangement eligibility. The provided record includes multiple amendments, which may change the original requirements.

Department of National Defence (DND) - *British Columbia *Nova Scotia, *Unspecified, Ottawa, Ontario

This appears to be an open Department of National Defence opportunity for nonmetallic hose assemblies used by the Canadian military. The tender covers 40 units in total, all identified with manufacturer Danfoss Power Solutions II,LLC: 10 units of part number FB649R0227-0227 (2 for CFB Halifax, Nova Scotia, and 8 for CFB Esquimalt, British Columbia), plus 30 units of part number CA3316MMH0450 (10 for Halifax and 20 for Esquimalt). The applicable GSIN is 4720, and the listed NCAGE is 01276. The closing date is September 18, 2026, at 2:00 p.m. The bid will be evaluated on a Delivery Duty Paid (DDP) basis, and the requirement is subject to a preference for Canadian goods and/or services. Suppliers proposing equivalent or substitute products must provide the brand, model or part number, and NCAGE. Required submissions include the Offeror Submission Details in both Excel and PDF, the Offeror Submission Form, and the Offeror Declaration Form. The solicitation includes multiple amendments, so businesses should review the complete official tender package and every applicable amendment before deciding whether to bid or submitting an offer. This summary does not determine eligibility or compliance.

Shared Services Canada - *Canada, Ottawa, Ontario

Shared Services Canada is seeking suppliers for an Invitation to Qualify (ITQ) under Government of Canada Network Services (GCNS) Stream 4—Optical Network Services (ONS). Businesses that are accepted as “Qualified Respondents” may be invited to participate in future refreshes of the related Request for Supply Arrangement (RFSA). This notice does not yet specify a purchase quantity, contract duration, delivery schedule, or the work to be ordered later. Those details would be established in subsequent solicitations. The closing date is September 18, 2026, at 2:00 p.m. The listed location is Ottawa, Ontario, although the opportunity concerns Government of Canada network services. Bell Canada, Rogers/Shaw Business, Eastlink, and Zayo Canada are identified as already qualified and do not need to respond to this ITQ. This opportunity appears potentially relevant to businesses with suitable optical network services capabilities, but the tender does not establish that any particular company qualifies. Review the two attached solicitation documents carefully— including the amendment, mandatory requirements, submission instructions, security or technical requirements, and deadlines—before deciding whether to bid. Verify all information against the official tender notice and confirm that the documents are current before submitting a response.

Shared Services Canada - *Canada, Ottawa, Ontario

Shared Services Canada is seeking suppliers for an Invitation to Qualify (ITQ) under Government of Canada Network Services (GCNS) Stream 5—Leased Dark Fibre (LDF). This process appears intended to establish which suppliers may participate in future refreshes of the Stream 5 LDF Request for Supply Arrangement (RFSA). It is not yet a specific dark-fibre service contract: quantities, contract duration, delivery timelines, and some participation conditions are to be determined in later solicitations. The opportunity may be relevant to Canadian telecommunications or network infrastructure providers capable of supplying leased dark-fibre services. However, this notice does not establish that any particular business qualifies. Rogers, Zayo Canada Inc., and Videotron were already qualified through an earlier ITQ and do not need to participate in this one. The tender is listed as open and closes September 18, 2026, at 2:00 p.m. The listed location is Canada, Ottawa, Ontario. The notice references Amendment 003 and provides four document links, which should be reviewed carefully for mandatory requirements, evaluation criteria, submission instructions, and amendment details. Verify all information against the official tender documents before deciding whether to submit a response.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

PSPC appears to be seeking one enclosed-cabin rigid hull inflatable boat measuring 6.4 to 7.5 metres. The requirement includes engines and a trailer, and the boat must be built to the Technical Statement of Requirement (TSOR). Delivery is to Delta, British Columbia. The procurement is being conducted under Supply Arrangement CW2460392 / E60MC-240001, so suppliers may need to meet the conditions of that arrangement to submit an offer. The tender is listed as open and closes September 18, 2026 at 2:00 p.m. However, the notice requests delivery by March 31, 2026, which is before the stated closing date. This may be an error or may reflect an amended schedule; confirm the dates in the official tender documents before relying on them. This opportunity potentially matches Canadian businesses that can supply and deliver a compliant 6.4–7.5 metre enclosed-cabin RHIB, including engines and trailer. Review the TSOR, Annex B payment and delivery instructions, supply-arrangement requirements, mandatory specifications, security or insurance requirements, and submission procedures. The provided record does not include an official source link or tender documents, so obtain and verify the complete official notice with PSPC before preparing or submitting a bid. Bid Maple is not affiliated with the Government of Canada.

Department of National Defence (DND) - *Canada, *World, Ottawa, Ontario

This appears to be an open Department of National Defence procurement for small quantities of Victoria-Class submarine spare parts. The requirement covers 15 line items, including scupper wands, nonmetallic shaped sections, O-rings, access covers, an actuating cylinder, and separators. Deliveries are requested at CFB Esquimalt in British Columbia and CFB Halifax in Nova Scotia. The quantities range from 1 to 50 units per line item. The largest requirements are 50 O-rings for each location under NSN 99-770-5109. The tender also includes several NSNs, part numbers, and NCAGE codes to identify the required parts. For the separator items, the listed part number is for reference only and must be accompanied by a drawing. The closing date is September 18, 2026, at 2:00 p.m. The provided notice does not specify the time zone, so this should be confirmed in the official tender documents. Suppliers offering equivalent or substitute products must identify the brand, model and/or part number, and NCAGE of the proposed product. The Crown may negotiate with suppliers, and submissions may be made in either official language. Potentially relevant businesses would likely need access to the specified parts or approved equivalents, the ability to provide supporting technical information—including drawings where required—and the ability to deliver to both military bases. The notice does not establish that any particular company qualifies. Before deciding whether to bid, review the full RFP, the amendment, and the line-item spreadsheet, and verify all specifications, delivery requirements, submission instructions, security or certification requirements, and the closing time on the official Canada Buys notice.Documents provided: RFP, Amendment 001, and Annex line-items details.

Department of Citizenship & Immigration (IRCC) - *Canada, Québec

This appears to be an open IRCC opportunity for the purchase, delivery, and installation of office furniture at 877 Expo Blvd., Vancouver, British Columbia. The work is expected to be completed by March 31, 2027, and includes workstations, work surfaces, filing and storage products, ancillary products, and collaborative furniture. The tender is being solicited through the PWGSC Supply Arrangement E60PQ-140003/D, General Stream. Suppliers generally need to be pre-qualified Supply Arrangement holders for the relevant product categories to be eligible to bid. A non-Supply Arrangement holder may submit a bid and apply for an arrangement at the same time, but cannot receive the contract unless the arrangement is issued. The government is not required to wait for that evaluation before awarding the contract. There is no security requirement identified in the notice. Bids are due September 18, 2026, at 3:00 p.m. The notice lists the location as Quebec, although the stated delivery and installation site is in Vancouver, B.C.; this discrepancy should be clarified with the contracting authority. Potentially relevant businesses would likely include office furniture manufacturers, authorized dealers, installers, and suppliers able to meet the specified product, delivery, and installation requirements. Interested suppliers should review the complete RFP, drawings, product-builder spreadsheet, and Supply Arrangement conditions, and submit questions to IRCC.Bids [email protected]. To ask about becoming a pre-qualified furniture Supply Arrangement holder, contact [email protected]. This summary does not confirm eligibility or suitability. Verify the current official tender notice, all attachments, deadlines, submission instructions, product specifications, and Supply Arrangement status before submitting a bid.

Department of the Environment (ECCC ) - *National Capital Region (NCR), Dartmouth, Nova Scotia

**Tender summary — Continuous Improvement of Two CGE Models** Environment and Climate Change Canada (ECCC) is seeking on-demand technical support and expertise to continuously improve two established computable general equilibrium (CGE) models: **EC-PRO** and **EC-MSMR**. The contract is expected to run for **three years from the date of award**. This opportunity appears most relevant to businesses or teams with specialized experience in **CGE economic modelling, climate-policy impact analysis, model development, technical research, and related software or data work**. The detailed qualifications, deliverables, evaluation method, pricing requirements, and personnel conditions should be reviewed in the Statement of Work and the full bid solicitation. **Key details:** - **Buyer:** Environment and Climate Change Canada - **Status:** Open - **Closing date:** September 18, 2026, at 3:00 p.m. - **Service locations:** National Capital Region and Dartmouth, Nova Scotia, according to the notice - **Security clearance:** No security requirement is identified - **Contract term:** Three years from contract award - **Bid language:** English or French - **Eligibility:** The notice states that Canadian suppliers and suppliers from applicable trading partners may submit offers; suppliers from non-trading partners may be rejected under the Policy on Reciprocal Procurement. - **Trade agreements:** The requirement is subject to several agreements, including the CFTA, CETA, WTO-AGP, CPTPP, and other listed agreements. - **Social procurement:** Businesses owned or led by Canadians from under-represented groups are encouraged to bid, although this is not stated as a mandatory condition. Bidders must also comply with the applicable integrity provisions and provide any required information concerning pensions or lump-sum payments. A debriefing may be requested within 15 working days after receiving the solicitation results. Before deciding whether to bid, review the official solicitation documents—particularly the Statement of Work, mandatory technical criteria, bidder instructions, evaluation criteria, submission format, and contracting authority details. The notice information provided here does not establish that any particular business qualifies, so all requirements and deadlines should be verified in the official tender notice before submitting an offer.

Department of National Defence (DND) - *Victoria *Canada, *Victoria, Victoria, British Columbia

The Department of National Defence appears to be seeking one laser engraver and one mechanical engraver for the D85 workshop at CFB Esquimalt in Victoria, British Columbia. The requirement includes delivery, installation, setup, configuration, commissioning, functional testing, accessories, operating manuals, warranty documentation, and at least four hours of online training for up to five Canadian Armed Forces personnel. The equipment must include warranty support covering parts and labour for at least one year. Security requirements apply to the organization and/or personnel, and bidders should review the applicable security clauses and clearance requirements. The procurement also indicates a preference for Canadian goods and/or services, and submissions may be made in English or French. The stated closing date is September 18, 2026, at 5:00 p.m. The Crown may negotiate with suppliers. This opportunity potentially matches businesses that can supply both types of engraving equipment and provide the required installation, training, warranty, and security-related documentation. However, the technical evaluation criteria, security obligations, delivery terms, and submission instructions should be reviewed carefully before deciding whether to bid. Verify all details, amendments, deadlines, and eligibility requirements in the official tender documents before submitting a proposal: - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104862/national-defence_bid-soliciation-w0103-260037_f.pdf - https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/104862/afr-form.pdf

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be an Advance Procurement Notice from Defence Construction Canada, not a live bid request yet. It is for the design and construction of a new Snow and Ice Control / Heavy Equipment facility at 4 Wing Cold Lake, Alberta, using a modified design-build approach. The work is large-scale, with an estimated value around CAD $110 million, and the planned solicitation is anticipated for September 2026 if it gets approval to proceed. Key points that may matter to a Canadian business owner: -Location: Cold Lake, Alberta -Buyer: Defence Construction Canada, Western Region -Project type: Design and construction of a military support facility -Security: Appears to require active or obtainable SECRET-level facility clearance, and some personnel may need Reliability Status. Security sponsorship may be needed. -Other possible requirements: Net-zero carbon design, DND security standards, IM/IT infrastructure, and controlled airfield access requirements. -Indigenous participation: The notice says the project may include an Indigenous businesses participation component under PSIB.Important caution: this notice says it is not a bid solicitation and there is no guarantee the project will proceed. A business interested in this opportunity should verify the official notice on MERX and review the eventual solicitation documents carefully, especially security, qualification, and participation requirements, before making any bid decisions.

Defence Construction Canada - Western Region - Edmonton, Alberta

This tender appears to be an Advance Procurement Notice from Defence Construction Canada’s Western Region for construction management services at CFB Suffield, Alberta. It is not a bid request yet, but a heads-up about a future opportunity. The planned scope seems to include new buildings, upgrades to existing buildings, demolition, and site/utility/road improvements for the Suffield Base Program. The estimated value is about $223 million, and the solicitation is anticipated around September 2026, if approved. It also appears to include security requirements, with an expected Designated Organization Screening (DOS) level, and bidders may need to start the security sponsorship process through DCC’s Industrial Security Program. The notice also suggests there may be an Indigenous business participation component under PSIB. A Canadian business in construction management or related infrastructure services may want to monitor this opportunity and review the official MERX notice closely, but should verify all requirements, timelines, security conditions, and any eligibility details before taking action.

Defence Construction Canada - Western Region - Edmonton, Alberta

This appears to be an Advance Procurement Notice, not a request for bids yet. The buyer is Defence Construction Canada (Western Region), and the project relates to Construction Management Services for the Wainwright Base Program at CFB Wainwright, Alberta. The notice says the project may involve new buildings, upgrades to existing buildings, demolition, and horizontal infrastructure improvements such as utilities, roads, and parking lots. The estimated value is about $525 million. The current closing date shown is 2026-09-20 at 4:00 PM, but the notice also says the actual solicitation is only anticipated for July/August 2026 and may not proceed at all. A key point is that security requirements are expected. The anticipated clearance level is Designated Organization Screening (DOS), and firms that do not already hold the required clearance are being encouraged to start the Industrial Security Program sponsorship process through DCC. The notice also says there may be an Indigenous business participation component under PSIB. For a Canadian business owner, this potentially matches firms that provide construction management services and are prepared for federal security screening. However, you should verify the official MERX notice and DCC security requirements carefully before taking any action, because this is only an advance notice and not a guaranteed opportunity.