Browse active Canadian government contracts.

Department of Public Works and Government Services (PSPC) - *Québec, Gatineau, Quebec

This tender appears to be a Request for Supply Arrangements (RFSA) from PSPC on behalf of DRDC Valcartier for research and development services in the C4ISR field, based in Valcartier, Quebec. It is a pre-qualification process,not a contract: the notice says the resulting supply arrangements are non-binding and future work would only become a contract if and when a specific task is awarded. The opportunity is open and closes on 2032-09-30 at 14:00. It may be relevant for businesses that provide R&D services related to command, control, communications, computers, intelligence, surveillance, and reconnaissance, but the official notice should be reviewed carefully to confirm the scope, requirements, and submission rules before bidding.

Employment and Social Development Canada - *Canada, Gatineau, QC

Employment and Social Development Canada (ESDC) is seeking suppliers for a national Supply Arrangement covering office furniture, equipment and cabling services across Canada. The arrangement appears intended for work at Service Canada Centres, Passport Canada offices and other ESDC office locations. Potentially relevant services include: - Furniture assembly, placement and moving - Furniture dismantling, packaging, labelling, crating and transport to storage - Office equipment cabling, connection, disconnection and installation - Staging and repair services, based on the amended RFSA title and requirements The arrangement is designed to pre-qualify suppliers. Qualified suppliers may then be considered for future work orders issued under the Supply Arrangement. Businesses may indicate which work streams they can perform; the notice identifies four streams, although the supplied description only provides detailed information for the first three. Important operational expectations may include following work orders and manufacturer instructions, protecting elevators, doors and other property, removing packaging waste, leaving sites clean, reporting damaged or non-functional items, and supplying packaging materials where required. The notice lists Canada-wide coverage, with Gatineau, Quebec shown as the location. The status is listed as open, with a closing date of December 27, 2033 at 2:00 p.m.; because the arrangement was originally described as starting April 1, 2024 and the notice is intended to remain continuously posted, bidders should confirm the current deadline, amendment status and submission process in the official RFSA documents. Review the complete RFSA, evaluation criteria and any security-related requirements before proceeding. The listed documents include the RFSA PDFs and a Contract Security Program registration application. This opportunity appears potentially relevant to Canadian businesses with the personnel, equipment, transportation, cabling capability and regional coverage needed for commercial office moves, installations or repairs, but the business should verify all mandatory requirements and eligibility details in the official tender notice before submitting an arrangement.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

This appears to be an open Government of Canada Request for Supply Arrangement (RFSA) for laboratory and scientific equipment, related parts and accessories, supplies, and services. PSPC may use the arrangement to buy these goods and services on an as-needed basis for eligible federal departments across Canada. The opportunity is intended to let new suppliers submit an arrangement through the Canada Buys SAP Ariba system. Suppliers that already submitted an arrangement under versions E60PV-19EQUI/B or E60PV-19EQUI/C may not need to submit a new one, according to the notice. The listed closing date is January 31, 2035, at 2:00 p.m. However, this unusually distant date and all submission requirements should be confirmed in the official tender notice. The listed location is Canada, Gatineau, Quebec, but the arrangement may support federal departments nationally. This could potentially match a Canadian business that supplies laboratory or scientific equipment, parts, accessories, consumables, or related services. The notice provided does not establish whether a particular business qualifies. Review the official Canada Buys/SAP Ariba notice for the scope, required commodity categories, registration and submission instructions, certifications, evaluation process, contract terms, and any amendments before deciding whether to submit.

Department of Public Works and Government Services (PSPC) - *Canada, Gatineau, Quebec

**Tender summary:** Public Services and Procurement Canada (PSPC) appears to be establishing a national supply arrangement under the National Shipbuilding Strategy. The arrangement is for specialized engineering, naval architecture, and technical inspection services supporting large-ship construction, smaller-ship construction, and ship repair, refit, and maintenance. Businesses may potentially submit for one or more of these service streams: - **A. Inspection Services** - **B. Technical Review Services** - **C. Technical Advisory Services** - **D. Risk Advisory Services** The tender is listed as **open** and identifies **Canada, Gatineau, Quebec** as the location. The listed closing date is **February 22, 2036 at 2:00 p.m.** This unusually distant date should be confirmed in the official SAP Ariba notice, along with any submission windows, qualification requirements, security requirements, required experience, and contract terms. The notice states that this is a reissued continuation of solicitation **EN578-150229/I**, moved from the former system to SAP Ariba because of system migration constraints. No supporting documents were provided in the tender information supplied here. This opportunity may be relevant to Canadian firms with applicable engineering, naval architecture, inspection, technical review, advisory, or risk advisory capabilities, but businesses should not assume they meet the requirements based on this summary alone. Review the official notice and all attached documents before deciding whether or how to submit an arrangement: https://portal.us.bn.cloud.ariba.com/dashboard/public/appext/comsapsbncdiscoveryui#/Rfx Event/preview/1110006074?an Id=ANONYMOUS

Public Works and Government Services Canada - *Yukon *Northwest Territories *New Brunswick *Alberta *Newfoundland and Labrador *Saskatchewan *National Capital Region (NCR) *Prince Edward Island *British Columbia *Ontario (except NCR) *Nova Scotia *Quebec (except NCR) *Manitoba *Nunavut Territory *Foreign, Gatineau, Quebec

This notice appears to be an information session—not a contract opportunity or bid solicitation—for suppliers interested in future Environmental Response Equipment Program (EREP) procurements. Public Works and Government Services Canada, working with the Canadian Coast Guard, intended to explain upcoming requests for proposals, the bidding process, phased bid compliance, and planned marine environmental response equipment opportunities. The industry day was scheduled for September 19, 2018, in Gatineau, Quebec, with Web Ex access. Registration was required by September 14, 2018. Those dates have passed, and the notice data showing an open status and a 2040 closing date may be outdated or system-generated. No contract would result from participating, participation was not a prerequisite for future bids, and supplier participation costs would not be reimbursed. The opportunity may be of historical interest to Canadian businesses involved in marine equipment, environmental response, emergency response, or related services. The notice references broad Canadian and international locations, but it does not describe a current purchase, deliverables, contract value, or award criteria. Before taking any action, verify the current status, amendments, attached presentations, and any replacement or related solicitations in the official Canada Buys notice and documents. This summary does not confirm eligibility or qualification for any future procurement.

Department of Natural Resources (NRCan) - *Canada, *Unspecified, Quebec, QC

Natural Resources Canada (NRCan) is seeking suppliers for a Supply Arrangement covering professional services related to airborne topographic LiDAR. The work may include acquiring LiDAR data, classifying it, inspecting the classification, and—under one work category—acquiring aerial orthophotos to support the LiDAR work. Suppliers may be able to seek qualification in up to four work categories. This opportunity is intended to add new suppliers to the existing pool; suppliers already pre-qualified under earlier versions of RFSA NRCan-5000045352 are generally not required to submit a new arrangement. The opportunity appears relevant to businesses with experience in airborne LiDAR data collection, geospatial data processing and classification, quality inspection, and potentially aerial photography or orthophoto production. The listed location is Canada, with Quebec identified, but the supplied notice does not provide enough information to determine the precise geographic or operational requirements. The notice is marked open and lists a closing date of March 31, 2040, at 1:00 a.m.; this unusually distant date should be confirmed in the current official Canada Buys documents. The solicitation is identified as RFSA NRCan-5000045352/F and supersedes earlier versions. Several amendments and question-and-answer documents are listed, so bidders should review the complete RFSA, Statement of Work, evaluation criteria, certifications, work-category requirements, and all amendments before preparing a submission. This summary does not determine whether a business qualifies. Verify the current official tender notice and all attached documents on Canada Buys before relying on the details or submitting a bid.

Department of Natural Resources (NRCan) - *Canada, Ottawa, ON

NRCan is accepting submissions for a Request for Supply Arrangement (RFSA) covering Client Facilitation Services. This is not a guarantee of work or a single contract; it is an opportunity for companies to become pre-qualified for future requirements. The services would support organizations with planning, developing, and implementing major energy-efficiency and greenhouse-gas-reduction initiatives. Relevant work may include energy management, measurement and verification, renewable energy projects, and energy performance contracts, supporting federal sustainability targets. The notice states that Canadian suppliers, suppliers from applicable trading partners, and certain non-trading-partner suppliers may be eligible to submit an arrangement, subject to applicable rules and sanctions. Eligibility to compete for later work may be more limited and will be specified in each individual solicitation. Suppliers already pre-qualified under the previous RFSA NRCan-5000075549 apparently do not need to submit a new arrangement. To submit documents, suppliers must first email [email protected] to request that a CPC Connect conversation be opened. Documents can then be submitted through that conversation. The tender is listed as open and shows a closing date of March 31, 2040 at 2:00 p.m. The unusually distant date, submission process, detailed qualification requirements, evaluation criteria, security or insurance requirements, and any applicable commodity or trading-partner restrictions should be confirmed in the official notice. Review the full RFSA document before deciding whether to submit: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/105305/rfsa-nrcan-5000075549-b-%28166933.pdf. This summary does not establish that a business qualifies, so verify all details directly with the official tender notice and NRCan before submitting.

Department of Natural Resources (NRCan) - *Canada, *National Capital Region (NCR), Ottawa, Ontario

NRCan is inviting suppliers to apply for a Supply Arrangement (RFSA) for technical support, research, and analysis related to energy-using products. This is a qualification process,not necessarily a single service contract: successful suppliers may be added to a pool from which individuals can later be selected. The opportunity covers eight service categories: 1. Appliances 2. Commercial refrigeration and food-service equipment 3. Lighting 4. Consumer electronics and office electronics 5. Industrial and commercial equipment 6. Heating, ventilation, air conditioning, and water-heating equipment 7. Building-envelope and fenestration assemblies and systems 8. Multi-equipment services Suppliers may apply for more than one category, and each category is evaluated separately. Suppliers already issued a supply arrangement under the previous RFSA NRCan-5000088325 generally do not need to submit a new arrangement, according to the notice. The listed location is Canada, with the National Capital Region in Ottawa, Ontario. The tender is marked open, and the notice lists a closing date of March 31, 2040, at 2:00 p.m.; the arrangement itself is described as having no defined end date. Because this date and the ongoing arrangement terms should be confirmed, review the official tender documents carefully. To submit, interested suppliers must email [email protected] to request that a CPC Connect conversation be opened. Documents can be submitted through that conversation once it is created. This opportunity appears potentially relevant to Canadian businesses with demonstrated expertise in one or more listed energy-product areas, but the information provided does not establish that any particular company qualifies. Check the official RFSA notice, evaluation criteria, required certifications, submission instructions, and any amendments before proceeding.Official document: https://canadabuys.canada.ca/sites/default/files/webform/tender_notice/95111/rfsa-nrcan-5000088325_b.pdf

Department of Natural Resources (NRCan) - *Canada, *Unspecified, Quebec, QC

Natural Resources Canada (NRCan) is accepting applications for a supply arrangement that appears intended to create a pool of suppliers able to test and certify energy-efficiency-regulated products and fenestration products. Suppliers may apply for up to eight categories: commercial refrigeration; industrial and commercial equipment; HVAC; household appliances; water heaters; electronics; lighting; and fenestration. Each category is evaluated separately, and applicants should identify the category number(s) in the title of their submission. Suppliers already issued a supply arrangement under RFSA No. NRCan-5000091272 may not need to submit a new arrangement. The opportunity is listed for Canada, with Quebec indicated, and is currently shown as open. The posted closing date is December 31, 2040, but this unusually distant date should be confirmed in the official tender documents. This may be relevant to businesses with the technical capability, facilities, personnel, and certifications required to test the applicable products; the summary does not establish eligibility. Review the full RFSA, amendments, and Q&A documents before submitting, and verify all requirements, deadlines, submission instructions, and the current status on the official Canada Buys notice.

Department of Natural Resources (NRCan) - *Canada, *Unspecified, Quebec, QC

NRCan is inviting suppliers to apply for a Supply Arrangement for professional geospatial data processing services. This is an ongoing pre-qualification opportunity rather than a single project contract. The arrangement appears relevant to Canadian businesses that can provide one or more of these service categories: (1) acquisition, structuring and normalization of vector data; (2) dematerialization and processing of raster data; (3) aerial-photo processing; and (4) dematerialization of aerial photos. Each category is evaluated separately, so a supplier may apply for one or more categories. Arrangements received by June 30 may be considered in the annual evaluation period held in July; submissions received later may be reviewed in the following annual cycle. Suppliers already pre-qualified under the earlier RFSA versions generally do not need to submit a new arrangement. The notice says the Supply Arrangement has no defined end date and will remain in place while Canada considers it useful. The listing shows Quebec/Canada and an open status, with a displayed closing date of December 31, 2040, but this appears to be an ongoing qualification notice rather than a normal one-time tender. Before taking action, review the complete official RFSA, amendments, questions-and-answers documents, Statement of Work, mandatory requirements, evaluation criteria, submission instructions, and any applicable security or experience requirements. Verify all dates and terms in the official Canada Buys notice and documents before submitting an arrangement; this summary does not establish that a business qualifies.

Public Works and Government Services Canada - *Newfoundland and Labrador *Nova Scotia *Ontario (except NCR) *Northwest Territories *Yukon *Alberta *New Brunswick *British Columbia *Prince Edward Island *Quebec (except NCR) *Saskatchewan *Nunavut Territory *Manitoba, Gatineau, Quebec

Public Works and Government Services Canada appears to be accepting supplier applications for an ongoing Supply Arrangement covering three types of electric buses: (1) electric shuttle buses, (2) electric school buses, and (3) electric commuter coaches. A business may submit an application for one, two, or all three groups. This is not a purchase contract by itself. Suppliers that meet Canada’s technical requirements may be placed on a pre-qualified supplier list. Only suppliers awarded a Supply Arrangement would generally be invited to bid on later, specific bus procurements. The arrangement has no stated end date, and new suppliers may apply on an ongoing basis. Buses may be delivered to destinations across Canada. The notice references multiple trade agreements and states that interested suppliers may submit an arrangement. Applications may be submitted in English or French, with electronic submission through epost Connect encouraged. The technical specifications, qualification requirements, submission instructions, and Amendment 007 should be reviewed in the attached official documents. The listed closing date is April 16, 2046 at 3:00 p.m., which is unusually distant and should be confirmed in the current Government Electronic Tendering Service notice. The tender record also lists multiple delivery regions across Canada, including most provinces and territories, with exclusions or special references for the National Capital Region. This opportunity potentially matches a Canadian manufacturer, distributor, integrator, or other supplier able to meet the applicable electric-bus technical specifications and supply-arrangement requirements. The business should verify product eligibility, testing and certification requirements, financial and corporate documentation, delivery and support obligations, bid-security or other submission requirements, and any changes in Amendment 007 before applying. Confirm all details directly in the official tender notice and attachments before submitting an arrangement. The provided documents are available through the Canada Buys document links in the tender record.

Shared Services Canada - *Canada, Ottawa, Ontario

Shared Services Canada is seeking Internet Service Providers to prequalify for Local Internet Access Services (LIAS) across Canada. This is an ongoing Request for Supply Arrangement (RFSA), not a request for a specific bid or immediate contract. Suppliers that demonstrate the required experience and capacity may be issued a Supply Arrangement and could later be invited to compete for individual service requirements, but receiving an arrangement does not guarantee future work. The services may include establishing new internet connections, managing existing connections, replacing expiring contracts, and supporting federal government sites and participating organizations nationwide. The opportunity appears potentially relevant to Canadian ISPs with the technical capability, coverage, staffing, and experience required by SSC. A supplier would need to review the solicitation documents and amendments carefully, register on SSC’s Procure to Pay (P2P) portal, and submit its response through that system. The listing shows a closing date of April 27, 2065 and describes the opportunity as ongoing, while the notification period references April 27, 2022; these details should be confirmed in the current official notice. Before taking action, verify the solicitation number BPM016120, the related solicitation BPM014160, all qualification requirements, response deadlines, amendments, and submission instructions directly in the SSC P2P portal and official tender documents.